HT4623 i update my iphone and now he cant conect to the network in israel

i update my iphone and when it finesh he cant conect to the network in israel

Where did you source your iPhone
It sounds as if it may have been hacked to unlock it and updating the iOS  locks it back
to the original Carrier
Do you have any error messages ?
and have you tried a reset followed by a restore if reset made no difference
Is your iPhone actually a 3G if so it does not support above 4.2.1

Similar Messages

  • I tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

    i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

    Did you try to connect in recovery mode to your computer, explained in this article?
    iOS: Unable to update or restore

  • HT201210 i updated my iphone and now all i have on the screen is the itunes icon

    i updated my iphone and now all i have on the screen is the itunes icon

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    NOTE:
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • HT4623 I updated my iphone and now its say I have to restore

    I updated my iphone and now its say I have to restore. Why

    uhoh, i can't remember, the window that had the message is gone now. i deleted the back up on itunes and when i just tried again, its now saying its will take 400 plus hours .... i think i've really screwed up now

  • HT4623 I updated my iphone and now it is saying to connect to itunes, which i did, and then a box popped up saying the iphone "iphone" is corrupted. HELP!

    I need help updating my iphone. After I upgraded the software, it then told me to connect to itunes. I have updated my itunes, and then connected. then a box popped up saying my iphone is corrupted... what do i do now? i also deleted my iphone backup in the device section of itunes. i got that info off of reading other post about this problem.

    uhoh, i can't remember, the window that had the message is gone now. i deleted the back up on itunes and when i just tried again, its now saying its will take 400 plus hours .... i think i've really screwed up now

  • HT4623 I updated my iPhone and now my wifi doesn't give me the option to join a network

    After updating my iPhone, my wifi option won't open up
    To let me join a network.

    Read the second half of the article you linked

  • I updated my iphone and now I cant connect to my home wifi

    Ive updated my iphone 4s to the new software and now I can no longer connect to my home wifi

    Hello there indianafran,
    Thank you for using Apple Support Communities!
    I recommend these troublehshooting steps from the article named iOS: Troubleshooting Wi-Fi networks and connections found here http://support.apple.com/kb/TS1398:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If that does not fix the issue then these steps near the bottom of the article is where I would go next:
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    All the very best,
    Sterling

  • HT4623 I tried to update my iphone and now i cant get rid of the i tunen plug emnlem on my phone

    how do I get rid of the itunes plug emnlem from my phone screen?

    I just got home from the Genius Bar; that graphic you see means you need to restore your settings.  My 3GS seems to have bitten the dust though; would not restore but the guy said to try one more time from home computer -- now I can't get my PC to recognize my phone and can't get to a prompt to restore to factory settings. 8-(.

  • HT4061 i downloaded the new  software update via iphone and now i cant get my iphone 4 to work. it just has a picture asking me to connect to itunes

    i  downladed the new software for my iphone 4 via the iphone. now my iphne is not working and asking me to plug it in to itunes. how do i get my phone back to normal?

    jnmcnicholas wrote:
    now my iphne is not working and asking me to plug it in to itunes.
    Then that is what you need to do.
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT4061 I just updated my iPhone and now it's frozen with the white apple showing. It won't even let me shut it off. Any idea how to restore it?

    Does anyone know how to restore it?

    Try a hard reset. Press the power button on top of the phone and the home button simultaneously. Hold them both for about a minute and hopefully the screen will cut off and then the apple will reappear and proceed to the setup screen.

  • I updated my iphone, and now it won't let me access an app...help!

    i updated my iphone and now i cant access an app...help!

    I do go thru safari and I get thru the log in into my account but when it comes to showing your statement it blocks it. I had no problems until I download the latest version.

  • I updated my iphone and now it won't turn on

    i updated my iphone and now it just wont turn on! The apple sign comes up as if its going to turn on and the sreen goes darker and just goes blank. why wont it turn on? its been doing this for the past half hour

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT201210 I tried to update my iphone and now it won't work at all

    I tried to update my iphone and now it won't work at all

    Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

  • My computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

    my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

    Hi there croadstar,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W. 

  • I have updated and restored my iphone and now it wont go bask the connect to itunes screen what do i do?

    I have updated and restored my iphone and now it wont go bask the connect to itunes screen what do i do?

    So what happens when you connect to iTunes?

Maybe you are looking for

  • Help with Time Period Query

    Dear Forum, I am trying to put together a SQL such that it lists my Invoices in aging bucket depending upon when I run the report For eg : inv number , 0-1 , 1-2, 2-3 , 3-4 and so on months. For given report run date and invoice date , it should put

  • How can I make my cd-roms work with osx 10.4.9?

    We bought a new mac, but my kids cd-roms -- which we just bought in December -- don't work with it. They say they're Macintosh compatible, but I suspect they just don't work with this new system. Is there a driver or some other update I can download

  • "File Dialog" Express VI returns the wrong path when the user selects the desktop

    In labview 8.0.1 with Windows XP, the File Dialog Express VI seems to return something other than the path selected by the user when configured to browse for folders (or files and folders) and the user selects the desktop. I can't determine exactly w

  • Using Planning vs Essbase connection in financial reports

    What are the pros/cons of using an essbase connection for financial reporting vs using a planning connection? we are on 9.2.1. using the Financial reporting studio client. These are basic financial reports-cost center expense reports, income statemen

  • How do I have one version only for RAW+JPEG

    I am shooting and importing RAW+JPEG, but get a separate version for each file - same as you would see in iPhoto. But in aperture I want just one version (and with the master JPEG hidden away, but available if wanted.) How can I achieve this?