HT4623 i update to ios 6 and my phone cant get any signal again
my iphone 4gs is not working properly after updating to ios 6
can someone plz help
if your no able to get signal try these
-pulling out sim card and retraying it
-turning on airplane mode then turning it off
-setting>general>reset> reset network setting
Similar Messages
-
I have an iphone 4S and stupidly let it update to iOs 7 and now I cant get wifi or bluetooth. Anyone know how I can get back the previous update when my iphone was working perfectly?
Your WiFi/Bluetooth chip has failed. Bring the phone (and $199 if outside the warranty period) to Apple for replaceement.
-
I made the mistake of hitting the update and now I cant access anything on my iPhone - I am usually more confident with tech but this is scary
Local Apple rep fixed problem. Thanks Restart
-
Messages are not showing up on my phone. no noise of notification. help?
Camera improvements
Swipe through different camera modes – video, still photo, square aspect, and panorama
Real-time photo filters with iPhone 4S or later, and iPod touch (5th generation) -
I updated to IOS 5 and apparently didn't get my apps backed up. So, they are now lost. Is there any way to restore them?
Are they backed up to your computer? If so you can go to the "Apps" tab in the main window of your iPad and resync them there.
OR
On you iPad go to App Store > Updates and the first tab should be something called "Purchased" (if you have already entered you Apple ID) and you can re-download from there. -
i recently switched to an android and now i cant get any messages from other iphone users due to imessage. how do i fix this?
As Peter noted and please pay attention to this line
"If you can't deactivate iMessage after you perform the steps above or you can't access the iPhone, please contact Apple Support" -
HT4623 tried updating to iOs 6 and now itunes thinks my phone has no sim card?
I have tried updating my iphone 3gs to the latest iOs 6 for Icloud and now my itunes is saying that my phone has no sim card in and won't update the phone or let me reset it?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
HT4623 i updated to 601.3 and now I cannot get my wifi
i updated to 6.0.3 and now I cannot get wifi
Hello Katski23,
Thank you for using Apple Support Communities!
If you are having issues connecting to your Wifi network, check out this article named iOS: Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398.
If the Wifi option is grayed out, then I would recommend takign a look at this article:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
All the very best,
Sterling -
I updated to IOS 5 and my phone continuously messes up. What can I do?
Since I updated my phone with the new operating system it consistently says "No Service" or "Searching." It also restarts whenever it wants. My phone was never like this before and only started after the upgrade. What can I do no?
Me too. There seem to be several threads now on this type of problem with IOS 5.
-
Everyone says do you have filters on your iPhone and I say no and it's suppose to come with iOS 7.0.4 isn't it?
Camera improvements
Swipe through different camera modes – video, still photo, square aspect, and panorama
Real-time photo filters with iPhone 4S or later, and iPod touch (5th generation) -
I did the itunes update on my computer and how I cant get Itunes to work.
I am upset, I did the typical update that I tunes gives you and now I can't get it to work at all. It says I need permission to use it, or that the moible system is not working which I am not sure what that means at all.
Hi ladyd172!
Try the steps listed in the following article, as I believe they will be relevant for the issue you are experiencing:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
HT4623 upgraded to IOS 7 and now can't get past set up page
I have iphone 4, updated to IOS 7 and now can't get past set up page? I restored from itunes when prompted and it said complete but still brings me back to set up screen. Any suggestions welcome.
ThanksThanks.
Is it safe to post ids on here? -
My Curve wont get any Signal and keeps saying SOS
Hi,
i have a Blackberry Curver 8250, since the server went down i cant get any signal. It keep saying SOS. i have tried a range of things to try and get signla but it just says SOS
help??
thanks,fizzakhalid wrote:
hi, my blackberry 9320 isnt reading my sim it keeps on saying ''insert sim''..and the signal place says SOS ..i inserted any other sim and it got connected instantly, i placed my sim in another phone but the other phone says 'insert sim''. i dont if its locked or wht :/ i need help. if my sim is unlocked how do i unlock it..please help
Hi and Welcome to the Community!
Given what you describe, I'd actually deduce a faulty SIM as the cause. If it required a password, then the prompt would be different than what you report. The fact that you get the same error with two different devices even further supports the faulty SIM conclusion. You need to contact the supplier to you of the SIM for replacement.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
HT4623 i updated my IOS and now my wi-fi doesn't work - any suggestions?
I updated to IOS 7 and now my wi-fi don't work - just keeping spinning when it is looking for wi-fi. I can't back up to the cloud without wi-fi.
Ughh!Try going to Settings>Reset>Reset Network Settings.
-
Changed my apple id but FaceTime didn't recognize this and when I updated to iOS 6 I can no longer get on to FaceTime. When I try, it says that the username or password is incorrect. Can anyone help
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom
Maybe you are looking for
-
Print crystal report to a specific printer tray
Greetings - I need to print out a report to a specific printer tray, can you please let me know how I set it up? Thanks, Lava
-
Is possible work with boleto from SmartForm using the Tcode FBZP ?
HI, SAPScript bar code output in PDF format As a SAP does not intend to deliver this solution for SAPscript because The report - RSTXPDFT4 does not work correct to bar code in the boletos (Brazil) when convert to PDF, we are going to change to Smart
-
Supported/Best Practice to restore Planning application between servers
I have two servers with Hyperion Planning 9.3.1 (prod and dev) I want to copy the application called 'BFS' from Production to 'NewBFS' - Dev server. As per our consultants they indicated to do the following: 1. Backup the repository database containi
-
Podcasts deleted from iPhone4 when download new podcasts on the phone
download podcasts both on computer and iPhone, occasionallt the existing podacasts are deleted when a new podcast is downloaded. Is there a setting somewhere that I've missed? There's never any issue on sync between device and computer. Would having
-
Dispatched Event not being caught
I have the following custom event: package import flash.events.Event; public class TestCustomEvent extends Event public static const EVENT_NAME:String = "TestCustom"; public var _message:String; public function TestCustomEvent(message:String) super(E