HT4623 I updated my iPhone 3g to iOS 6 and it has not had service for a while. I have always used it as an iPod but now it says I have no service and is not letting me access it. What can I do?
What can I do to use my iPhone as an iPod. It says it had no service and when I connect it to itunes it says my iPhone couldn't be restored/connected. I have looked everywhere. I do have a Sim Card
Jennyccc wrote:
What can I do to fix it
Jailbroken devices are not support by this forum, or by Apple. Apple reserves the right to refuse activation to any iOS device that is currently, or previously, been jailbroken.
Similar Messages
-
I updated my iPhone 4S with ios 7 and it wont let me send emails.
After I updated my iPhone, it wouldn't let me send emails. I keep getting a message that says "The conection to the outgoing server "smtp.gmail.com" failed. Additional Outgoing Mail Servers can be configured in Settings>Mail, Contacts, Calendars. I tried turning on/off the different server options, but nothing has worked. Help!
What is displaying on the device screen?
-
Does anyone know why my iphone5 has not been able to charge since ive updated it to ios7?
It's happening even with cable that came with my wife and my own iphones. We bothe get the message!
-
I have updated my IOS to IOS 6 of my iphone 4.
When i ask for route between two famous places, it gives reply that direction not found between places.
I dont understand
Whats thisI had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged.... -
So i just updated my iPhone 5 to ios 7 and i can't turn on the location services...a press on the button wich turns on the location services but nothing happens and it doesn't apear green like all others softwere buttons.
General> Reset< Reset All Settings will work! Be careful not to erase! and you will have to redo all of your settings. Everything, ringers, even wifi will be lost! Big pain!!! I still dont have everything like I used to after the reset, but location services can be enabled again.
-
I recently updated my iPhone 4 to iOS 6 and suddenly after a few days my App Store Kept telling me it couldn't connect to iTunes Store! How Can This Be Solved?
If you would take a moment and looka t the other posts in the forums, you will see that this is being asked over and over and over and over again.
Apparently there is an issue with itunes.
Be patient. Wait. Try again later. -
After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.
When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.
-
Updated my iphone 3gs to ios 5 and now it keeps just shutting off and coming back on?
I updated my iphones 3gs to ios 5 and now it just randomly shuts off and on. whats wrong with it?
don't ask me why this worked, but it did for me last night. In iTunes, where your device shows up on the left side, I double clicked on it. It then allows you to change the name like you can for changing file/folder names. I changed 1 letter on the name of the ipod and hit enter. I then right clicked on the new ipod name and chose restore from backup. My choices for backup was the original name of the ipod only and not the name i had just changed it to. I told it to go ahead and backup from the old name figuring I would get the same results, but not the case. It restored it with all app, music and pictures with one exception...all of the settings, email setup and information within the apps was lost. Atleast that an easier fix than starting all over. Hope this will work for you guys too with the same issue.
-
Updated my iPhone 4 to iOS 5 and have now lost all my contacts, messages, photo's etc? HELP!!
Hi guys,
I have just updated my iphone 4 to iOS 5 and have lost everything!
I did a back up prior to the install and have the latest version of iTunes. I completed the install and went to retrieve the back up via a restore, I selected the latest restore, it thinks about it then comes up with the following error message: "File is corrupt or not compatible with this phone"
I was also perviously using Mobile Me for instances like this, though my accont has recently expired and I can no longer access it, all my data was stored on there. Annoying!
Can anyone help? Be a huge help...If you made a backup in iTunes before upgrading you can access the data with iPhone / iPod Touch Backup Extractor.
Can be downloaded from here: http://supercrazyawesome.com/
This helped me getting my Notes back after the upgrade to iOS 5. -
I just updated my iphone 4s to ios 6 and now whenever i take a picture it doesnt save to the camera roll. does anyone else have this problem or know how to fix it?
Same problem on im iPhone4 / iOS6 with normal camera!
The camera takes a picture but the picture (video) doesnt appear in my Photos and therefore is not saved! -
I just updated my iphone 5 to ios 7 and updated itunes as well...now my iphone is now showing up in itunes devices. Does anyone know how to fix this problem?
Same problem on im iPhone4 / iOS6 with normal camera!
The camera takes a picture but the picture (video) doesnt appear in my Photos and therefore is not saved! -
So I just updated my iphone 4S to iOS 6 and was having fun trying the panorama pictures, and all of the sudden my phone turned off (it was fully charged so it's not out of batery and it felt warm) and it has since not turned on again. Suggestions?
Even if it is a hardware problem they should fix it regardless of warranty. If you buy a car and after 1.5 years the doors fall off due to a failure in their design and construction, do you think the car manufacturer could pull off what Apple is trying to do? Yes the car still delivers its primary objective of driving from A to B, but significant functionality has been lost due to their fault.
It is the same with this iPhone wifi problem. Apple are a disgrace, I have had significant Apple Hardware failures with my MacBook Pro and iPhone within 2 years of purchase. Pathetic quality. -
i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???
raghav sharma wrote:
i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???
Try This...
Close All Open Apps... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
I recently updated my iphone 4S with IOS 7 and suddenly last weekend all my contacts was just suddenly wiped out! I have been using this phone for almost 2 years and never had this problem! I reset my phone and restore the back up and it worked for a week and last night the same thing happen again! Are these glitches and a problem with IOS 7? What should I do?
You need to update iTunes to 11.1 on your PC
-
I've lost all my contacts on my iphone 4S with iOS 6 and I haven't a backup. How can I restore them?
I've lost all my contacts on my iphone 4S with iOS 6 and I haven't a backup. How can I restore them? I've also downloaded Dr.Fone but it doesn't works, it stops scanning on 99%! Thank you.
You need to post this in the correct discussion if you want a reply: Keynote iOS
Maybe you are looking for
-
Error ( while instantiating a class)
I encountered the following errors ...plz help..Click and Clicka are two public classes which i have written ..Both of them have actionPerformed function defined .. gui.java:14: cannot resolve symbol symbol : class Click location: class gui ActionLi
-
ISE 1.2 - Error 12929 NAS sends RADIUS accounting update messages too frequently
We are currently running Cisco ISE 1.2, and every day under the "Misconfigured Network Devices" section on the main ISE Page, I have a huge list of different devices that are all being flagged with the following error message: "12929 NAS sends RADIUS
-
Special Characters for Receiver JDBC Adapter
Hi, Our Scenario is Proxy -PI-JDBC (SQLServer ). We have special characters in the payload and we are abel to see the special characters in PI.According to JDBC Faq we used haquot attribute and concatenated with Prefix N'<Value>'. But still when the
-
Hi there, Any help or thoughts on the following question would be most appreciated. I wanted to find out how one can <b>upload GL balances</b> from a Legacy system into SAP? I was able to upload the GL accts using LSMW, but I now want to find out how
-
Opening PDF link through DOS start command
Our software manager is asking if we can use a simple DOS command (embedded in a browser-like xaml interface) to open a PDF file to a hypertext link brought over from a FrameMaker source doc. I know that I can open a.pdf with DOS command "start a.pdf