HT4623 I updated to latest system. it tells me I have to accept new i cloud terms and conditions. When I try, which i have been doing since Friday, it tells me I cant connect to server. This means I no longer have an smart phone. Apple ignore me!!!
I updated to latest system. It tells me I need to accept new terms and conditions. I have tried since Friday. It continually tlls mr I cannot connect to server. Result I no longer have anI phone. What do I do?
Apple ignore me!!!!
Hi man with problems,
Thanks for visiting Apple Support Communities.
If you have not already, be sure to try restarting and, if that doesn't resolve it, resetting your iPhone. See this article for help:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If you still see a "cannot connect to server" message, try the steps in this article next:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best Regards,
Jeremy
Similar Messages
-
Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7.
It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398 -
Theres not accept button in the terms and conditions, so i cant download my film, what i can do? Help!
Do you mean in the Downloads tab in the iTunes app on the iPad ? If so, then the T&Cs only appear if there are no outstanding downloads available - if you've bought (or if you are in the US re-downloaded) any films on the iPad then they should have downloaded into the Videos app
-
I just tried to upload the new operating system for my I phone 4s , I get to the terms and conditions, when touch "agree" it opens up and I touch agree again and it closes and nothing more happens
Reset and start all over again.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?
Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup.<br />
You can check that via the right-click context menu of that file and open the Properties.<br />
If you are not sure about the file type then you can open the file in Firefox via "File > Open File"<br />
A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links.<br />
A JSON backup starts with: {"title":"","id":1,"dateAdded":<br />
An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki>
You may need to add quotes ("") around the name to rename the file to the correct file extension.
See also:
* http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
Cheers, Tom -
After updating my iphone4 to iOS 7.0.4. I am having a problem with my iCloud. Message keeps coming up you must accept iCloud's terms and conditions. Options are not now or ok. Choose ok and message comes up unable to connect to server.. Does anybody no how to fix this problem???
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Terms and
Conditions
Send by Email
IMPORTANT c.etc.etc.etc. etc etc
A. iCloud terms >
B. Privacy Policy >
;kgj;kvjkbkjb/jb/ljb/jb/skdjvb kjsbkjb
sjk/vb.skjbv.kjbv.kjbvkjbv.kfjdbv.kjbv
.samndb .as b.s, , ß≤ kh.sdv;iyegveiu
etc.etc.
Disagree AgreeReset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
So what happens is that I try to accept the terms and conditions of iCloud (and by the way this annoying message keeps popping up every 2 minutes, literally, asking for my iCloud pass for an old account with a non-existent mail) or the ToC you need agree in order to update your software, I press agree and then nothing happens. It just stays there. (I can still update on my computer but I don't know what to do about iCloud)
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try signing out and then back into Settings>iTunes and App Store -
I connect my i-pad mini to my wireless router and it says im connected but it wont let me do anything anybody know why ?
You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
How do I get them back? It's from the Quicktime that already came with my Mac...please help me...It won't let me import movies to iMovie!!
What installer software package files? Could you tell me how to get there?
Afraid I'm not a mind reader. You have to download the installer packages from whatever source provides those installer packages. For instance, you would download the DivX installer package file from DivX. The Perian codec installer package would found at the Perian web site. QT "Pro" codec components installers may be include with older Motion or FCP Suite software or from the Apple site, etc., etc., etc. At this point all I know for sure is that that you have part of the DivX package installed and should reinstall the entire package if you plan to use it for anything.
Everyone's codec component configuration may be different depending on what codecs the need to use. Perhaps it would be easier if I provide an image showing the codec components installed on my Snow Leopard configured laptop:
This is a very basic set-up since I do most of my video work on my iMac which has FCP installed on it. In this case you can see:
a) AC3MovieImport.component (Apple)
b) AppleIntermediaCodec.component (Apple)
c) AppleMPEG2Codec.component (Apple)
d) Elgato Turbo.component (Elgato)
e) EyeTV MPEG Support.component (Elgato)
f) Flip4Mac WMV Advanced.component (Telestream)
g) Flip4Mac WMV Export.component (Telestream)
h) Flip4Mac WMV Import.component (Telestream)
i) Perian.component (Perian)
j) x264Encoder.component (MacUpdate)
The first three codecs were installed by my System Installer w/iMovie package (i.e., pre-installed on system when purchased or added afterwards by iMovie). The Elgato codec installers came with with my Turbo H.264 and EyeTV hardware devices. (I you don't have such devices, then you don't needcan't use these codecs.) The WMV codecs were purchased from Telestream. The Perian codec was a free download from the Perian web site and is used for DivX, XviD, 3ivX, DTS, AC3, MKV, FLV, and other audio/video/file type support. (I.e., I don't use the DivX package.) The X.264 codec is a leftover from my old Leopard system and not really used much anymore since I now prefer using HandBrake GUI for most X.264 custom encodes.
At this point, would assume you need to rerun the Snow Leopard/iMovie Installer if you purchased the system with system pre-installed or purchased the it as a system upgrade. Another alternative would be to find another Snow Leopard OS platform and simply copy the missing Apple iMovie codecs from a working system to your non-working system. All other codecs are up to you. Only you know what third-party codecs were installed on your system. And if you don't remember, you will probably find out what you are missing every time you try to play a video containing an unsupported codec.
Since you seem to be very inexperienced here, you may wish to consider joining a local user group or seeking some one-on-one assistance from someone in your local area. -
having attempted to upgrade to iO7 latest op system,the Ipad has stuck on the Terms & conditions page.It will not accept my agreement to terms and conditions or allow me to read them.
Ideas please on how to get it to work again,which will have to be via my lap top!
It sound as if the iPad is woking in the background-i.e.receiving eMails.Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
IOS7 Update is failing to install correctly, frozen on 'Terms and Conditions' window
Tried to install updates to IOS7 to keep my IPad current, set-up has frozen at the 'Terms and Conditions' page, will not let me proceed. Neither 'Agree' nor 'Disagree' work, and therefore set-up will not complete, rendering the machine unusable
Restart or Reset iPad and continue with update.
-
When trying to update to new iOS my iPad freezes after I agree to Terms and Conditions
Why does my iPad freeze after I agree to the terms and conditions when trying to update to new iOS
I have no clue but I would wait several hours and then try again. I could be wrong but it's harmless.
-
HT4623 when i click agree, then agree again on terms and conditions nothing happens
when settibg up the new version of ios i have gone through the setup fine until i reach agree to terms and conditions when i click agree nothing happens
Make sure your device isnt still plugged into a computer or wall outlet
If it is not plugged into anything hold down the sleep/wake buttone and the home button until you see an apple logo.
It will perform a soft reset and reboot the phone and then try again
Hope this works.
Maybe you are looking for
-
Vendor Name is not coming in Studio
Hi, Vendor name as well as the name is not coming in the development studio. Rather it takes directly the sap.com as vendor name. I have created product, software components(with necessary dependencies). but still i am not getting it right. Can
-
Have firefox version 31, when check shows Java is vulnerable, have Se7 U51,10.51.2.13. When click on the box to update brings me to a Java page of articles. So how do I just update to the correct version from what have ??
-
Hi All, I have this problem, all forms on the application server are working, when I download any fbm file for modify things to make a new one (I dont need to make new forms from zero) I get an error with the attached library. I can fix this when I r
-
Autoplay: Adobe Captivate 6 Project
Hi we created a project for a client and published a .swf. They came back saying they have a problem with the course not starting automatically. " We have re-published the latest version and are still running into the same issue. The course does not
-
Hi all, I want to delete the variant I have created using alv(slis alv) and it is not available an option to delete the variant... So I want to delete it from db but where are they saved? Thanks in advance. Deniz.