HT4623 i updating my ipod with iso 4.2.1 and now I can't use my apps any more when I try to sync my apps say i have to put the iso 4.3 I don't know what can I do
somebody knows what happen
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
Similar Messages
-
My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony
1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422] -
All I get when I turn iPod on is the USB connection to iTunes image. Then the system tells me that I have to restore the iPod. When I go through that process it says it cannot be restores because the device cannot be located. What do I do??
- Reboot the computer
- Try another cable and USB port
- Try placing the iPiod in DFU mode and then restoring
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
HT201363 I have never seen the rescue email address i don't know what it is!
Okay so my apple id has asked me to verify my security questions, i made the id so long ago that i can't remember the questions! i was going to send it my my rescue email but i dont know what the email is and i have never seen the email address before! Is there a way that i can get a new rescue email address!? Thanks in advance!
Not without correctly answering two of the questions. You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102232) -
Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing" don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?
#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first -
The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I want to update my OS from X10.6.8 to the next level but I don't know what that is. Can someone tell me the next version to us? Thanks.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
Identifier 5,1 or later.
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
I use MacbookPro late 2011 with Maverick, when i put iPhone 5 or another cellphone askew on left corner of touch pad and slide it to keyboard, the macbook will sleep, i don't know what the problem is, it occur on another macbook pro late 2011
It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ? -
I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
I have been using Macromedia Contribute 3 to maintain my website so my needs are pretty simple. But I would like to upgrade but don't know what to download. I want the new software to handle my existing website without a lot of challenges. What do you recommend?
Hello,
There is no upgrade path available from Macromedia Contribute 3 to Adobe Contribute 6.5. However you can buy the latest version of Contribute which is 6.5 from the link mentioned below.
http://www.adobe.com/products/contribute.html
Regards,
Rajeev -
I accidentally turned the Bluetooth off from my Mac all in one and now I can't use the mouse anymore so I don't know I can reactivate the Bluetooth again!! Please help!
Aisha05Try resetting the SMC.
Barry -
I want to start a new iTunes U course for catolog and I don't know what can I do please give me description about this title.
If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
I've updated my 2007 MacBook to 10.6.8, and now my iPhone 3 (used as iPod) and iPhone 4 aren't recognized to be synced anymore or I get an error message telling me to update my phone to 11.1 or something. When I do that is appears to update and when finished nothing appears to have updated.
It is possible one of the 10.6.8 updates may help:
Combo v1.1 (7/25/2011), 10.6.8 2013 Security Update 004, 2013-005 Java update.
Note, your machine is too old to use the latest Java from http://www.java.com/ -
I just updated my 4S with iOS 8.1.1 and now my screens are not proportioned correctly - just a bit to long and wide. Is there a way to adjust? Or go back to 8.1?
lisan1234,
I am sorry to hear about the screen issues. To clarify, do you only notice the screen proportion difference when in a certain application? By to long or wide are you stating that parts of the screen images are cut off? Please provide details
LindseyT_VZW
Follow us on Twitter @VZWSupport -
Hi I have concern about my purchased , I don't know what can I do?
Hi I have concern about my purchased , I don't know what can I do?
well recomend to see if ur iPhone is under warranty.. but sounds like a hareware issue! you can try it but i dont think it would work but to see if its a software issue put device it Recover mode or known has DFU mode an force restore (you will lose all content on the iPhone) an install 6.1.3 fresh on it but to me sounds like a LCD & Digitizer problem might need a new Assembly...
Maybe you are looking for
-
No: of Approvers on PO and requisition
How can we find from backend no: of approvers that a PO or requisition have? Thanks SS
-
okay...2 days ago the iPhone 4 vibrated for a good 45 min. did a hard reboot on the phone, stopped vibrating, locked on call screen, can't answer or recieve calls. Talked to a tech support last night. Was told to do a restore, saved all of what we co
-
Solution to only TWO USB ports, please
I should have paid more attention when I bought my Mac. I didn't realize there were only TWO USB ports on board. My job requires me to be mobile, and on any given day, I could be using up to 10 USB ports. I know they make hubs, one of which I've trie
-
i created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song
-
Best Practices for Vendor creation
Can anyone that has the Purchasing dept. (one who is able to issue PO's) also has the ability to create vendors MK01(local) XK01(central). I'm trying to understand the risks with one who can issue PO's also can setup vendors. Thanks in advance! Best,