HT4623 If i go to general and look for the software update button, there is not one on my ipad2. What do i do then?
If i go to general and look for the software update button, there is not one on my ipad2. What do i do then?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom
Similar Messages
-
is there something else I can do to get Pandora to play again?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help
Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC. -
HT4623 I do not have the software update button under general? How do I update?
I do not have the software update button under general. How do I update?
Hi!
you first you should update your device with iTunes in computer to iOS 5 then OTA (over the air) update button will be enable.
for updating with computer:
1- Download latest version of iTunes from here.
2- connect your iPad to computer (iTunes).
3- in left side (iTunes 10 or older) or in top right (iTunes 11 - latest version) your iPad will be apear.
4- click on it. in summery tab you find update button.
before using iTunes on computer please read the manual carefully or see here and find your own topic. -
I have an iPod with iOS 4.2.1 and would like to up date to version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?
You cannot update it if you can't get the latest version of iTunes. Actually, the latest version of iTunes will run in XP if you have Service Pack 2. Also, you posted in the iPad forum, and your profile shows you have an iPad, but in your post, you say it is an iPod. Is it an iPad or an iPod?
-
HT4623 Why can't I find the Software Update button? I only see About and Usage.
Why can't I find the Software Update button? I only see About and Usage.
Under About, what version do you have? The Software Update option in Settings was not introduced until iOS 5.0.
-
HT4623 What if the "software update" button isn't there?
Does anyone know what to do if the "Software Update" button isn't there? I probably sound really lame, but I want to update to the iOS 5.0 for the iPad 1.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
How do I update my iPad 2 to iOS 5, I tried going to settings,general ,software update but I can't seem to find the software update button pls help :)
Go to Settings > General > About and see what iOS version you are running. If it is lower than 5, you won't find the software update button. It was added when iOS 5 came out. The current iOS is 5.1.1. To update to the current OS, you'll need to connect to the computer you sync with (this is important - do not connect to a computer you do not sync with as you will lose you apps) and update the software in iTunes. Once you have updated to the 5.1.1, the software update button will be in Settings going forward. Make sure you have a lot of time. Updating from below 5 to 5 or higher is a somewhat lengthy process.
This link will provide the guidance you need:
http://www.macworld.com/article/1162925/how_to_upgrade_your_ios_device_to_ios_5. html -
While updating the iPhone 5 software from 6.1.3 to 6.1.4, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in. Using Windows 7 and phone not recognised by computer, let alone by iTunes.
Any suggestions? Happy to take it off to the the Apple genius people but would prefer to get it running myself.
Regards.Try this
iOS: Device not recognized in iTunes for Windows -
i have an unlocked iphone 3gs, and i want to update it. it doesnt have a software update button in the settings section under general. how do i do it? would i have to plug the iphone into the computer of the person who used it before i did? please help!
Plug it into itunes with the USB cable. The over the air update feature is a new feature, not part of iOS4, so you do not have it to use until you update.
-
HT4623 My iPhone does not have the software update button in the general section
I do not have a software update button in the general section
How do I updated iPhone with new softwareWhat version of iOS software do you have currently?
You can also update in iTunes:
Select the device in iTunes and you can find this on the summary page. All 3rd party app updates are done through the App Store updates tab.
Hope this helps! -
help me please!!!!!!!!!!!!!!!
OS 10.6.8 is Snow Leopard and that's the last update. OS 10.7.x is Lion, a different operating system, and that's already been replaced by Mountain Lion, OS 10.8. Both of the new operating systems have to be purchased from Apple. OS 10.8 is available from the App Store. You would have to call Apple if you want to just buy OS 10.7.
-
hello, how do i go about updating my iOS on my ipad to higher or latest as it is only iOS5 and some apps/products will not work or run unless higher?
iOS 5.1.1 is the last update for that model.
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.0.x
iPhone 4S iOS 7.0.x
iPhone 5 iOS 7.0.x
iPhone 5c iOS 7.0.x
iPhone 5s iOS 7.0.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 7.0.x
iPad 1 iOS 5.1.1
iPad 2 iOS 7.0.x
iPad 3 iOS 7.0.x
iPad 4 iOS 7.0.x
iPad Mini iOS 7.0.x
iPad Air iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
Searching in file and looking for the next occurence
Hello!
I have a problem when searching in a text file. I want to find a specific occurence of an element and next time I perform the serach fint the next occurence. One problem is that the file is in some large (>1Gb) I cant get it to work. Please look at my snippet below:
n = 0;
do {
if (bufReader.read() == -1)
break;
do {
line = bufReader.readLine();
if (line.indexOf(s) !=-1){
n = bufReader.getLineNumber();
System.out.println("Next:" + next);
bufReader.mark(500);
} while (n != bufReader.getLineNumber());
if (next < n){
bufReader.reset();
line = bufReader.readLine();
if (line.indexOf(s) !=-1) next = bufReader.getLineNumber();
} while (next > n);
if (line == null) return;I had already explored the Time Series algorithm and the predictions are not what i wanted as i do not have the month and day sepecifications. The only measure i have is a year and a total for that year. And i have 5 years of historical data.
I was an easy solution. In excel we predict using Linear Expression and that is not something which is straight drag and drop in the OLAP World !! The dataset that i was using with the logic of "scenario" etc was incorrect. Cleanup the fact table (measures)
and make it appear like this:-
The factsummary table looks like below:-
DateKey FiscalYear total
20100101 2010 19000
20110101 2011 19700
20120101 2012 19800
20130101 2013 19666
20140101 2014 19444
Write an MDX Expression as below and thats about it !!
WITH
MEMBER Measures.[Total Sales Forecast] AS
LinRegPoint(
Rank( [Date].[Calendar].CurrentMember, [Date].[Calendar].CurrentMember.LEVEL.MEMBERS),
Descendants( [Date].[Calendar].[Calendar Year], [Date].[Calendar].CurrentMember.LEVEL),
[Measures].[Total],
Rank( [Date].[Calendar].CurrentMember, [Date].[Calendar].CurrentMember.LEVEL.MEMBERS))
,FORMAT_STRING="#,0"
SELECT
DESCENDANTS( [Date].[Calendar].[Calendar Year], [Date].[Calendar].[Year]) ON COLUMNS,
{ [Measures].[Total], Measures.[Total Sales Forecast]} ON ROWS
FROM [Adventure Works]
SQLSolutions360
Maybe you are looking for
-
Once I've burned a DVD by exporting photos so a pc can read them, is there a way to view them full screen on my Mac without having to open each one in preview?
-
Connecting to a MySQL Database
I just installed the XAMPP control panal that gives me the graphic user interface for Mysql server. I'm trying to connect Dreamweaver to a database I created on my local server using XAMPP. In Dreamweaver when I try to connect to the mysql server (an
-
How to handle the BOLB column Using JDBC adapter
Hi, I want to sending of a BOLB column from a DB2 database table to another DB2 database, and the sender and receiver both by using JDBC adapter. The two tables in each other database have the same columns. Here is the table's structure: <ID>st
-
Acrobat 9 STD - invalid serial number
I have three separate serial numbers for three separate Acrobat 9 Standard packages. I have lost the CD's and trying to download and install any one of them and it tells me that it's not a valid serial number for each one. Where do I go from here?
-
MS Office Mac wreaks havoc with arabic fonts on OSX
i always have this problem when installing the dreaded MS Office for Mac on any OSX system and that is that Arabic fonts that work fine start going haywire because MS Office Mac installs some funky corrupt fonts. Does anyone know how to go back to th