HT4623 If you get a bad download how do you re-install the IOS

I have an Apple 4 I phone. I recently downloaded the update to IOS 6 and immediately afterwards my phone started acting up. During a phonecall, the microphone (speaker) seems to disconnect. I can hear the other person but suddenly they no longer can hear me. I have hit the "speaker button" to see if that would change things but it does not. The only thing that appears to be wrong is they no longer can hear me.
I use this phone as my primary phone. I have done the reset. I have done everything I can think off. Occassionally if I turn it off for about 5 minutes the thing will work properly again. So I did it this time. I then called Apple Support line to ask them how to fix the problem and guess what....... they could not hear me
So I assuming I got a bad update or something is wrong with the software. So how do I reinstall IOS 6 or is that what I should do?
Thanks in Advance.

In less than 3 years I'll be there also. Guess I won't catch up to you though, you'll always be the older buzzard :-)

Similar Messages

  • TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

    I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
    On pressing retry I got the same message.
    On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
    I reinstalled with the same error messages and the same results.
    I uninstalled existing and reinstalled from scratch and the same error messages again.
    I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
    It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
    I hope you can advise me how to recover my backups

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • How do you upgarde to the ios 5 when you dont konw your adminitratror name and password

    how do you upgrade to the iOS 5 when you don't know your administrator name and password

    Ask the person who administers the computer/network.
    Just what was the error message and when did yu get it?

  • HT4972 I attempted to install the iOS 5 software onto my iPhone 4 several times a few months ago. Each time the download timed out at about 3.75 hours. Any suggestions on how to complete the update?

    I attempted to install the iOS 5 software onto my iPhone 4 several times a few months ago. Each time the download timed out at about 3.75 hours. Any suggestions on how to complete the update?

    See... Updating to iOS 5
    http://support.apple.com/kb/HT4972
    If you are using windows...
    Temporarily disable your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • How can i re install the OS if the software gets corrupted in OSX 10.8 ?

    how can i re install the OS if the software gets corrupted in OSX 10.8 ?

    If the hard disk is damaged:
    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Uitlity, select Macintosh HD in the sidebar and repair the disk. If it can't be repaired, take your Mac to an Apple Store

  • I have an A1288 ipod touch I bought about 3 years ago. I am currently trying to download an app however the I'm getting an error message which is essentially saying that the "ios" I'm using isn't up to date and the itunes summary says otherwise?

    I have an A1288 ipod touch I bought about 3 years ago. I am currently trying to download an app however the I'm getting an error message which is essentially saying that the "ios" I'm using isn't up to date and the itunes summary says otherwise?
    Other forums state I have to buy a new one but what happens when this happens again I think I'm moving to another brand this is crazy?

    Yes, there's a limit, and that iPod touch has reached it.
    (72099)

  • Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser

    Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser until I installed their new google voice and video chat (made by vidyo) software. I was told by genius bar to install Yosemite, which I did. But that did not solve the problem. I removed macKeeper, as well, since a techie friend told me that could be the cause. Nothing so far has worked.  When the problem first happened, it seemed to only happen in Chrome. Google voice calling out worked fine in safari, for about a day or so. Now I cannot call out from any browser. I can, however receive calls, and make calls within the video hangout.
    I can be contacted directly if questions at gary at couplewise dot followed by the usual extensin

    You can only suspend service for 3 months at a time (with or without payment) and only twice a year.

  • I installed the Dreamweaver trail 5 days , but my computer restored and now its gone and when i try to download it again it says that i have got it.. how do i re install the trail?

    I installed the Dreamweaver trail 5 days , but my computer restored and now its gone and when i try to download it again it says that i have got it.. how do i re install the trail?

    Run the cleaner tool and try again.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • HT4623 yesterdsay i downloaded ios6 on my iphone 3Gs & the iphone stoped working it's just appears the apple & disappers the apple it was all the night like this what can i do?is it installing the ios 6 or what's the problem???

    yesterdsay i downloaded ios6 on my iphone 3Gs & the iphone stoped working it's just appears the apple & disappers the apple it was all the night like this what can i do?is it installing the ios 6 or what's the problem???

    Thank You, thank You ...so much......that feature made me crazy!  
    Ocean20 wrote:
    This can be turned off in settings/accessibility/zoom. Then on the next screen turn off

  • HT4623 How do I install the iOS 4.3 on my iPhone 3GS ? I've tried direct links but it says safari cannot install this ? Please help !

    How do I install the iOS 4.3 on my iPhone 3GS ? I've tried direct links but they it says safari cannot install this ? Please help !

    You can not install anything but the current version of iOS. If you have a 3Gs, then you can install 6.0.1 by plugging it into your computer running iTunes (10.7 or higher).  If you have a 3G, 4.2.1 is the end of the line.

  • How do I un-install the update that disabled my add-on's that I depend highly upon?

    Today I downloaded your update, THEN I was told that some programs I highly depend upon have been disabled, how do I un-install the update and get my functionality back for my programs. I was not having any problems until I downloaded the update. I am not happy. The programs involved in the order of there importance are Freecorder and U-tube Video Capture.

    You can make Firefox '''Firefox 5.0''' look like Firefox 3.6.18, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 5.0, or 4.0.1, look like 3.6)].
    '''Research your extensions''',
    You might also find addition information on the extension's add-on page, some may have updates, some solutions may be found in the developer comments or user comments on the add-on, or on the "'''View all versions'''" link which is part of the '''Release notes''' at the bottom of the add-on page where you may find a compatible version available that is waiting for approval.
    ===Force Compatibility===
    You can force 5.0 "compatibility" with the "[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Compatibility Reporter]" extension, or with [http://kb.mozillazine.org/Extensions.checkCompatibility extensions.checkCompatibility] using about:config.
    One of the nice things about having extensions is that you can disable them and still use Firefox, disabled extensions will still get update notices. Or maybe use another extension until the one you want is fixed or works for you.
    ===Restore an Earlier Version===
    For those that really need an earlier version of Firefox, find your system and the Firefox version you want in releases, download and start the install.
    * ftp://ftp.mozilla.org/pub/firefox/releases/
    :or with the latest of version 3
    * http://www.mozilla.com/firefox/all-older.html
    When reinstalling Firefox from a download, Firefox must be down once the installation starts. When the installation finishes, don't let the install start firefox for you. Instead end the install and start Firefox in your normal manner, thus preventing creating a new profile which does not have your bookmarks cookies, etc (but your old profile would still be around and would).

  • Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

    hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

    If your computer is running an OS X prior to Snow Leopard 10.6,
    the answer (if it is an Intel-based Mac; not old PowerPC model)
    would be to buy the retail Snow Leopard 10.6 DVD from Apple
    for about $20, and install it. Then update that to 10.6.8 by using
    the installed Snow Leopard online to get Combo Update v1.1 for
    Snow Leopard 10.6.8. After that is installed & updated, run the
    system's Software Update again, to see what else is available to
    that system.
    Later systems can then be looked into at Mac App Store, once
    the computer is running Snow Leopard 10.6.8.
    And if your computer is a Power PC (G4/G5, etc) and has no
    Core2Duo kind of CPU -- See "About this Mac" in apple menu
    to disclose the general info about your Mac. Also you can see
    even more by clicking on "More Info" when looking in there...
    If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
    Hopefully this helps.
    Good luck & happy computing!

  • I inadvertently deleted and emptied the trash bin on Firefox. I have a MAC OSX-VERSION 10.4.11. How can I re-install the latest version of Firefox that is COMPUTER FRIENDLY for the MAC OSX Version 10.4.11? I appreciate any help.

    I inadvertently deleted Firefox and emptied the trash bin. I believe it was version 3.5. I have a MAC OSX 10.4.11. After several futile attemps how can I re-install the latest version of Firefox compatible to my MAC system? Thanks!

    As of Firefox 4.0 and newer the Firefox builds from Mozilla requires both Mac OSX 10.'''5'''+ and a Intel.
    Either you can use 3.6.19 from http://www.mozilla.com/en-US/firefox/all-older.html
    Though for you 3.6.18 will be safe also as 3.6.19 was to workaround a font crashing issue on 10.7 Lion that was not fixed in time on Lion before release. http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.18/mac/ and pick your language and download the Firefox 3.6.18.dmg

  • How do I re-install the Collab Suite Portal

    Hi,
    I have an installation where the Collaboration Suite portal isn't working. The individual component pages work but when I click on the Collab Suite portal I get an error message that /pls/portal does not exist. How do I re-install the portal to have it appear on the Welcome page?
    TIA

    Unfortunately you do not have enough information in this post to know what issue you have encountered. You have not specified your Release version, environment or any history that brought you to this state.
    You are not able to just install the Portal component by its self and have all the applications work on it.
    This sounds like a great issue for OCS support. I would log a TAR.

  • How can I re-install the app?

    Indesign CC was trashed. Creative Cloud Shows app as "up to date". How can I re-install the app?

    Hi Notebook57,
    You first need to uninstall the application completely.
    In Mac :-- Applications --->Utilities --->Adobe Installers
    in Adobe installers you will find the uninstaller for Indesign CC just run that and complete the uninstallation.
    In window :-- Control panel ---> programs and features --> uninstall Indesign cc.
    After doing this you can launch Creative cloud desktop ---> log out and log back in.
    You should see the option to install the software again.
    Thanks
    Kapil Rupani

Maybe you are looking for

  • Using APT ActiveX methods to create a labview program for BPC 203 3 channel Benchtop Piezo controller

    Hi Everyone,                   I am really very new to Labview and i am in great need for some help.I am assigned a task where i am supposed to create a labview program to control or moniter a BPC203 3 channel benchtop  Piezo controller. I created a

  • How do I get past ES4 Install Failure during Component Deployment in Configuration Manager?

    I have done several installs of LiveCycle, but can't seem to get passed this error.  I am installing a fresh copy of ES4 on a Windows 2008 R2 server using the JBOSS partial turnkey install.  I have it configured to connect to a  SQL Server database i

  • My zen 20gb is dead, any suggesti

    hi, my zen wont turn on and wont charge, when its connected to the charger it gets hot. i tried the reset but nothing happens, a few times the creative screen came on then turned off, the last time when i pulled the charger out a bar code appeared ac

  • Mon ipad ne veut pas s'activer suite la mise a jour iOS 7 que faire?

    Bonjour, je viens de faire la mise a jour de mon ipad 2 16Go 3G , tout se passe bien il s'allume, me demande la langue , pays etc... mais lors de l'activation que cela soit avec itunes ou reseaux wifi il ne veux pas s'activer et me dit que le serveur

  • CME fxo port problem

    hi, I have a 2801 CME and 2 fxo lines. Some times when both lines are seized (because of incoming and outgoing call) and after the phones are on hook the lines are still seized and are not released and when i removed the cables from fxo port, the led