HT4623 Im so lost on this ipod plz help plz

Someone plz help this lost gurl i jus bought this ipod touch an its used an the sad thing is everyone i kno is not smart enough to help me update it. when i go into general settings under the about op there is not a op for updates ive done what i kno but mayb someone could help me please

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848
NOTE: A 2nd generation can not be upgraded beyond 4.2.1.

Similar Messages

  • Hi friends i have mac ibook g4 i know its a really old model but its perfectly fine it has installed mac os x 10.5.8 ok whenever i copy and paste any thing it says no free space weather i copy from folder to desktop or from usb to mac plz help plz

    hi friends i have mac ibook g4 i know its a really old model but its perfectly fine it has installed mac os x 10.5.8 ok whenever i copy and paste anything it says no free space weather i copy from folder to desktop or from usb to mac plz help plz

    There is no download for 10.4.x or 10.5.x, there is a very slim chance you can get 10.5 by calling Apple, but usually you can only get it on eBay & such.
    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
        * A PowerPC G3, G4, or G5 processor
        * Built-in FireWire
        * At least 256 MB of RAM (I recommend 1GB minimum)
        * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
        * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools  (I recommend 20GB minimum)
    http://support.apple.com/kb/HT1514
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Classic/OS9 Apps no longer supported.
    May be available from Apple again...
    https://discussions.apple.com/thread/4720126?tstart=0
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
    Now, for your Trash problem, see if this helps...
    Solving Trash Problems...
    http://thexlab.com/faqs/trash.html

  • ITunes not recognizing my ipod need help plz

    when i hook my ipod into my computer, the computer recognizes that my ipod is there. it makes the ding sound that windows makes when u add or remove hardware and the ipod shows up in my computer. When i go to update it with itunes 7 though, itunes does not seem to know that my ipod is there. it shows no signs of recognizing my ipod. what can i do to fix this?

    Sounds like windows confusing the ipod as a network drive try the steps here http://docs.info.apple.com/article.html?artnum=93499

  • IPod Problems help PLZ

    i have a 80gb classic and it just stopped working all of a sudden. When i turn it on all it does is go to the apple logo and turn off. When i try to connect it to my computer it doesnt reconize it. what should i do.
    Please help

    Hello OZ1989,
    And welcome to Apple Discussions!
    With the iPod hooked up, I would try putting the iPod into [Disk Mode|http://support.apple.com/kb/HT1363] to help the iPod stay powered on and mounted in Windows "My Computer" as an external drive. If you are able to get it to stay mounted, I would attempt to reformat the iPod using the tools provided by Windows, and then [Restoring|http://support.apple.com/kb/HT1339] the iPod via iTunes.
    Here are instructions on how to reformat your iPod.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    Hope this helps.
    B-rock

  • Frozen ipod..HELP PLZ

    i had my ipod nano for about 3 dayz now..and itz been frozen almost all day..nothing moves and the backlight has been on the whole time. i tried everything that this website said. i tried to reset it and everything nd itz making me pretty mad. so can someone please help me with other advice then the site gives you because i already tried it, and i even had it sit on the charger most of the time but it is still frozen

    if you've tried this Resetting iPod if it appears frozen or doesn't respond and this Restoring iPod to factory settings then the next thing is the 5 R's here http://www.apple.com/support/
    If that lot doesn't fix it then your nano should still be under warranty. Send it back and get a new one.
    Seasons Greetings
    Colin R.

  • I am getting this message when i want to update my ipod: "there are purchased items on my ipod that have not been transferred to your itunes library.  You should transfer these items to your itunes library before updating this ipod".  help please.

    I think I have transferred all purchased items but I keep getting the same message and I am afraid that i will lose all my purchases when i update it if I choose to continue.

    With the device connected, select File > Transfer purchases.
    If there is content from multiple Apple IDs on the device, each Apple ID must be authorized on the computer.

  • When I "email link" from my firefox menu, instead of simply emailing it from hotmail in firefox, explorer opens up the hotmail page. this is slow. help, plz

    i want to be able to email the page directly from firefox, not from explorer.

    my email links will not open firefox or if open will not go to the browser/site.
    since changing to firefox, my email do not work. I have made firefox the default and deleted the prevoius browser and restarted my pc....

  • Somehow in the past several months Firefox changed. Now when I access my hotmail account I can not open or delete any email. I can sign in and out. Have no problem using firefox on other pc's to access hotmail just on this PC..help plz

    Windows XP SP3
    2gb intel, 80gb Hdd, 2gb RAM
    At one time I had no problem accessing hotmail email.
    I dont know if the changed occurred after a firefox update or
    if maybe a grandkid changed something

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Thunderbird

  • HT4061 i have lost my iphone need your help plz

    please provide me the the serial number !!!

    No one here could possibly know your serial number.
    Read the article you linked

  • NEED HELP REALY BAD PLZ HELP PLZ

    my ipod 20GB clickwheel without color is having some problems. you see it keeps showing the usb recharging adapter and a plugin on screen. I plug it in to the computer and it wont pop up my ipod on itunes and my ipod wont wake up and say do not disconect. if i try to turn it on or reset it it just shows apple than goes to that first picture i said on screen. Wat do i do please help

    Earlier model iPods needed to plug into the wall adapter to complete the Restore or Firmware Update process. If it is asking for an AC adapter, then you need to find and use one to complete the sequence. There may be a reason that yours is asking for one at this point....Either way, it wants what it wants.
    As far as I know, there is no way around this requirement. Perhaps you can borrow one from a friend, an Apple Store or buy one somewhere (if you do not have your original one).

  • I have lost my ipod touch 4g 32gb i have the serial number and i dont know how to find ? plz help

    i have lost my ipod touch 4g 32gb i have the serial number and i dont know how to find ? plz help plz plz plz plz email me if you want the serial key my email is [email protected]

    Unless you had already set up
    Apple - iPod touch - How to set up Find My iPod touch
    there is nospecial way to locate your iPod,  Apple will not help.  Your SN is only good for identifying the iPod as yours if it is found.
    Change the passwoard for all accounts used onthe iPod and report it to the police. Also see:
    Reporting a lost or stolen Apple product

  • I downloaded new music onto itunes and it plays just fine but when i sync it to my ipod 4th gen. it wont sync. They greyed out when i click "on this ipod"

    I downloaded new music onto itunes and it plays just fine but when i sync it to my ipod 4th gen. it wont sync. They greyed out when i click "on this ipod". Help me?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync or delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.

  • Ah first time here, plz help! Flash / Premiere

    Ok, I have been using Flash since way back. I'm now in CS5 and need a solution for this and since I have the CS5 master Suite I would think Premiere can do this following scenerio.
    I have a flash presentation, the client needs me to add a voiceover track to the existing animation but the voiceover needs to be edited to fit. I need a solution where I can see the swf, add the voiceover.mp3 and edit accordingly.
    Once I do this I woudl have to export the edited audio as an .mp3 and drop it in the .fla of the presentation.
    Can this be done in Premiere and is there a tute for something like this?
    any help plz?
    thx
    rd

    Very glad that all worked for you.
    Though I do not know it, it appears that Cubase probably has issues, such as I suspect with Audition. The choice of DAW is up to what the user has available.
    PrPro has pretty good Audio-editing capabilities already, and when it falls short, I just reach for Audition (have not really put the newer versions of SoundBooth to a test, so cannot comment on any limitations there), even if I do an Export for a reference file for the Video. Keeping things in one program has many benefits, and usually saves a lot of time and effort.
    Now, if SmartSound would just do their Sonicfire Pro 5 to work within PrPro CS5, like they did with FCP! That would save me a lot of reference Video file Exports, when scoring. They claim that it's in the works, but I have not seen anything new, on that front, for quite awhile.
    Good luck, and thanks for reporting your success!
    Hunt
    PS - one of the biggest issues with MP3 source material, is when there are other "things" inside the MP3's, like album art, etc. Nice that yours worked fine.

  • Very strange problem plz help////

    user name == scott.
    tablespace name == data and users.
    data tablespace content approx.20 tables.
    users tablespace content approx 5 tables.
    both tables are under scott schema...
    i want to reclaim data tablespace size..
    so first i import complete tablespace data. as system user.
    then after i want to drop data tablespace but i got error...
    SQL> drop tablespace data including contents and datafiles;
    drop tablespace data including contents and datafiles
    ERROR at line 1:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-02429: cannot drop index used for enforcement of unique/primary key
    plz. sir help how can i drop this tablespace plz. help plz. plz. plz.

    Try
    SQL> drop tablespace data including contents and datafiles cascade constraints;It seems that you have some referential integrity constraints, outside data tablespace, pointing to a table inside data tablespace.

  • JTable header problem plz help me

    hi
    i want to insert JTable in JTextPane but I have two problems
    i can't do this so any help plz
    1- i want to insert table with header and allow the user to edit (write) on the table header when running the
    program
    2- i want to insert table without header but i want to make the table column still resizable

    hi
    i want to insert JTable in JTextPane but I have two problems
    i can't do this so any help plz
    1- i want to insert table with header and allow the user to edit (write) on the table header when running the
    program
    2- i want to insert table without header but i want to make the table column still resizable

Maybe you are looking for

  • Satellite A300D-1EI - blue screen error - display drivers had failed

    I 've bought my laptop a month ago. Everything is working great except two "blue screen" errors caused by the graphics card. Both were when the laptop was connected with TV through S-video port. First was when the laptop display turned off after 15 m

  • Screen Sharing works for alien hosts but not for LAN hosts

    Hello! I am having a really strange problem in a customer network. The network is a local private network with one MacOS Server 10.6.8 and around 12 iMacs running MacOS 10.6.8. The server is running headless in cellar so the user maintain the backup

  • How to create Batch number manually

    Hi, We have already done 105 without batch number. But we need to create the batch number for the quantity which is already inwarded in 105. Please let me know  how this can be done. regards Suresh

  • Row wise init block has no value defination.

    Hi Experts, I ahve requirement where i need to pick the department of loged in users in dashboard prompt. So I created the session variable with row wise and written the query: SELECT DISTINCT 'Department', Department_Name FROM tableA WHERE A.LOGIN_I

  • Running 10G as a non local system account on Windows Server 2003

    Hi, I have an Oracle 10G database running on Windows Server 2003, SP2. I have created the database and it all works fine while the service is running as the default local system account. However, when I change the user that the service runs as to a d