HT4623 in emergency call  mode

my iphone in emergency call mode how to unlock the phone

seems everyone has this same question but there are NO solutions.

Similar Messages

  • Emergancy call mode, Please Help!

    I have a droid razr and I am stuck in the emergency call mode. I tried taking the sim card out and powering down that didn't work. I let the battery completely die for 3 days. I tried to dial some number without pushing send and hitting home. What can I do? Please someone help??

        Hello gfouty
    That would be a very frustrating issue. Let's get this fixed! Did you get a new Sim card? What model Droid Razr do you have? What zip code are you in?
    I look forward to your reply so we can get you up and running.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • Can not exit emergency call mode

    My phone seems to be stuck in emergency call mode.  How do I get out of it.  Turning off and on does not work  Thanks

    But did you Try a Soft Reset!   This is Different than just shutting it off..
    Soft Reset - DROID RAZR / RAZR MAXX by MOTOROLA  
    A soft reset is the most useful tool for resolving a variety of issues. In most cases, a soft reset will not affect data on the device, unless the battery is very low.
    Press and hold volume down key then press and hold the power button until the device powers off then release.
    P.C. b33

  • Droid Razr Max is stuck in Emergency call mode

    Last night my phone went into Emergency call mode.  I cannot get it out.  I have shut down the phone numerous times, waited and rebooted.  It is still stuck.  I have no idea what caused this.  Help please!

        @bbears4fun,
    You come to the right place for help! I definitely want you to be able to use your phone at all times.
    I see you found that you had accidentally set up the PIN for the phone. Were you able to turn off the PIN as Ann154 suggested http://vz.to/1kGlRcD? Keep me posted if you need further assistance.
    JohnB_VZW
    Follow us on Twitter @VZWSupport

  • New OS 3gs wiped out contacts now only operate in Emergency Call mode

    HELP!!! I installed the new OS on my 3gs last night. This morning I noticed all contacts wiped out. So I tried to do a restore and now I'm getting error messages in iTunes and my phone will ONLY operate in Emergency call mode. I need help PLEASE!!
    thanks!

    Unfortunately that's where the problem started I keep getting and unknown error everytime I try to Sync up. This keeps happening after I did the restore in iTunes. I've turned off the phone, logged out of itunes and I keep getting the same error about error -9812

  • Why is my iphone on emergency call mode?

    i have an unlocked t-mobile iphone and i updated to os 3.0 update.
    now my phone says connect to itunes and slide for emergency. and every time i go into itunes it says "the sim card inserted in this iphone does not appear to be supported." i think it is because it is unlocked. but i need help. does any1 know how to no longer be on emergency call mode.? please reply if u have any ideas. thank you

    I have been facing same sort of problem for couple of weeks.Every time I put my sim card, the phone reads emergency calls only. I brought it to AT&T and the salesman told me that a wire just went bad. Does anyone know what else it could be or how I can fix a "bad wire"?
    Thanks in advance.

  • BB Tour: Emergency Call Mode Only

    This morning I accidentally selected the the option to make an emergency call rather than unlocking my phone via password.  I immediately terminated the call, but have been unable to make/receive calls, browse the web, send text  or email etc.  I tried powering the phone on and off, removing the battery, and turning my network connections on and off (tried all several times) and nothing has worked.  My phone has been like this for 6 hours now.  A review of the BB guide stated the emergency call mode would disable once I made an outbound non emergency call, but his obviously didn't work.  The other portion of the guide said the phone normally resets after a few minutes.  Any ideas?

    Here is some additional information if you are still unable to use your device.
    If your BlackBerry® device is connected to a CDMA network, when you end an emergency call, your device enters Emergency Callback Mode.
    This mode enables the operator to call you back or determine your approximate location. Emergency
    Callback Mode is active for five minutes or is canceled when you make a non-emergency call.
    ***Since you have already tried to make a non-emergency call, and it is still not disabling the emergency mode, try calling your voicemail box (*86 send) and go as far as checking your messages. This should disable the Emergency Callback Mode.
    I hope this information helps.

  • Pearl 8130 Emergency Call Mode

    Hi,  I've been issued a Pearl 8130 at work and generally like it. It does generally work well for me, except for one deal-breaking flaw.
    Occasionally the phone jumps into "Emergency Call Mode" when I try to unlock it. I'll have the "Unlock" keyword highlighted but it jumps to Emergency Call just as I press the pearl, probably due to slight motion because I am using the phone on the train. Twice now an inadvertant second button press caused the phone to call 911. I hung up ASAP, but they called me back and I had to explain that I am OK and it is just this stupid phone making unwanted 911 calls.
    How do I get disable Emergency Call Mode?  It is really annoying, and a terrible design flaw.
    Thanks

    Sorry, you can't disable it, and if you are in the USA, emergency calling is required by federal law.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My iphone is stuck in emergency call mode and itunes does not recognize my phone

    my iphone is stuck in emergency call mode and itunes does not recognize my phone

    NVM... broke down and called Apple Care.  Pressed on/off button and held it for a few minutes before pressing home button.  In recovery mode, but at least it is doing something now!

  • Tried to sync to new itunes and now my phone is stuck in emergency call mod

    Okay, Ive tried for hours and need help! I tried to update my 3G to the new itunes. Since then doing so, im getting an error message that reads "We cannot complete your iTunes store request. The network connection times out." I trouble shooted and followed all the prompts it said to fix the issue, have unplugged and restarted, and now the only thing the stupid phone does is give me the "emergency call" screen! I set it to factory settings before downloading the new software.. Haven't seen another screen for hours! I'm getting frustrated.. Any thoughts? Someone? Please!!!

    You should try to put the phone into Recovery Mode so that iTunes can restore it.
    1. First, make sure that your computer has an active internet connection (you can open the iTunes Music Store and make sure you can navigate around as a way to check your internet connection).
    2. Turn the phone off (hold the top button until the slider appears, then drag the slider).
    3. Hold down the Home (round) button while you connect the USB cable to the iPhone. The USB cable should be connected directly to a good USB port on your computer, not on a USB hub, monitor, or keyboard.
    4. Continue to hold the Home button down until the Recovery Mode screen appears (it looks like this: http://tinyurl.com/mhsje5 )
    5. When you see that screen, release the Home button.
    iTunes should tell you that it has detected an iPhone in Recovery Mode and that you must restore it.
    iTunes will probably give you the option to set it up as a new phone or restore it from a backup. Choose setting it up as a new phone.

  • LG Lucid stuck in Emergency Call mode

    Phone said "no service" all day; restarted, reseated SIM card, nothing works.  Help!

        seniorcitzen,
    Oh no! Let's help get your services back up and running! What is your zip code? Have you tried a master/factory reset on your device? These steps will help walk you through the reset http://vz.to/1cw4C8w
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • Z30 Emergency Calls Only

    Hi,
    I have been using Z30 for about 3 months and it was fine until sunday. I made a call on sunday night before going to bed. When I wake up in the morning, to my surprise, i see the phone was switched to EMERGENCY CALLS mode. I swapped SIM, toggled airplane and Mobile Network. Even I tried the Network Selection mode to manual/automatic. Everything went unsuccessful.
    I can use the same SIM in the other phone. 
    Please advise how the EMERGENCY CALLS only mode can be changed.
    One more thing, 2 days before the phone OS was updated to 10.3.1.1767.
    Look forward to hear from you.
    Thank you.
    S. Alwar
    Solved!
    Go to Solution.

    Can you try: Turn on Airplane mode --> Reset Phone (using either method I said earlier) --> Turn off airplane mode and check if signal is back ?
    Also a couple of other quick questions. When you put network settings to "manual", does it show a list of available networks ?
    Can you also tell me the Radio Version you have from: Settings --> About --> OS (from dropdown)  ? Is it 10.3.1.2559 (just want to see if it same as my phone)
    Thanks!

  • My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.

    My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
    Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo.

  • Emergency call only mode, how to get out?

    I was downloading the Samsung Kies app and then my phone went into Emergency call only mode. I have tried power down, take the battery out, reboot and recover mode and it comes back to the same, emergency call only mode. What do I do?

    kandys wrote:
    I was downloading the Samsung Kies app and then my phone went into Emergency call only mode. I have tried power down, take the battery out, reboot and recover mode and it comes back to the same, emergency call only mode. What do I do?
    I also had this problem recently and did search on Google and found this very nice guide to handle a no service or emergency calls only issue. Hope this will help you too or other people who will have the same problem. Here is the link for that.
    http://www.phoneforum.com/forums/general-phone-forum/4663.htm#post9128

  • HT201413 phone is stuck in emergency call only mode how do i fix this

    my phone is stuck in emergency call only mode

    Hi, bit75.  
    Thank you visiting Apple Support Communities.  
    This sounds like your device may be disabled and can only make emergency calls.  Here is the article that I would recommend going through if this is the case.  
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled
    http://support.apple.com/en-us/HT1212
    Cheers, 
    Jason H.  

Maybe you are looking for

  • Laserjet 1020 printer doesn't work through airport express. PLEASE help me

    Hi everyone. I've just bought a laserjet 1020, and though I can perfectly "see" it through the airport admin utility, there is no way to have a page printed. Works perfectly when connect it to the laptop through usb though. I have already tried every

  • ALV Grid display  IN BACKGROUND

    Hi,     When I run the ALV grid display in foreground(32 fields) its running well. But when I run it in background many fields get truncated. I know we can only use 255 characters in background. Is there any way out?....let me put it in this way.....

  • X4600 Server - No Video

    My company just purchased 3 Sun X4600 Servers. 1 unit produces video while the other 2 units do not have video (or in redirection) and just show a blank display. Serial Console & ILOM work fine. Green LED on front of server. No faults on CPU/RAM card

  • Aperture quick preview locks in after using Google/Nik to edit a photo

    I'm not sure when this started happening, but I've recently been annoyed with very frequent restarts of Aperture being required.  If i edit a photo with any of the Nik/Google programs, save it, and get back to my project full of photos...the quick pr

  • Dymanin File Name Creating Using ODI variable

    Hi All, I am trying to create a flat file dynamically using ODI variables. I am following a document in metalink (Using A Dynamically Specified File Name Or Directory Name With ODI [ID 423635.1]). However, I am getting the following error, whenever I