HT4623 IOS 6 is not responding

IOS6 not responding,having a problem downing music and battery not chariging properly

You say it's not responding but then mention it is but not correctly
I recommend you first:
Reboot the device, then if you are still having issues do a full reset. - settings - general - reset, at the bottom of the page
If you do not have a back up, try to back up first as it wipes and restores the device to the default settings

Similar Messages

  • 6500 IOS HSRP Gateway not responding to ARP requests

    WS-C6509, running Native IOS version 12.2(33)SXH4. Pair of 6500 configured with HSRP serving as Gateway to down stream clients
    Ping requests from clients not having a Default Gateway (AIX Server Team recommendation) failing.
    Packet capture show ARP requests being received by Gateway 6500, but Gateway will not respond for up to 30 seconds at which point ping requests will start working. But after a period of inactivity, the cycle starts over again - 30 second delay before traffic starts flowing.
    Having a Default Gateway is a separate discussion. I'm just interested in being able to provide technical reason why this is occuring.
    Anyone experience this?
    Any suggestions for addtional troubleshooting measures?
    Thanks in advance.

    Looks to me like a timer problem - maybe a ARP timer on the clients? Check the ARP tables of your clients during your tests.
    HTH

  • HT4623 My iPad is not responding. It does not unlock. I have a message: iCloud Backup, "This iPad hasn't been backed up in 5 weeks. Backups happen when this iPad plugged in, locked, and connected to Wi-Fi". My Question: plugged in to WHAT? locked, HOW? an

    My iPad is not responding. It does not unlock. I have a message: iCloud Backup, "This iPad hasn't been backed up in 5 weeks. Backups happen when this iPad plugged in, locked, and connected to Wi-Fi". My Question: plugged in to WHAT? locked, HOW? and how to connect to Wi-Fi when my iPad does not respond to anything I do with it? PLEASE HELP.

    Welcome to Apple Support Communities
    Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use the iPad again.
    The iPad makes a backup into iCloud automatically when it's connected to the network and it is been charged

  • PLEASE HELP ME!!! ipod touch 3rd gen 32 gb ios 5 sreen not responding to touch! What can i do ?

    My ipod touch battery ran out and i went to charge it using a wall adapter. it turn on got stuck in a boot loop for 15 min before going to the lock screen. after that, the screen is not responding to my touch what can i do?

    - First try resetting hte iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next connect to your computer and restore from backup
    - Then try restoring to factory defaults/new iPod.

  • HT4623 ios 7 is not very compatiable for iphone 4!!!!!!!!

    ios 7 is not very compatiable for iphone 4!!!!!!!!

    I have noticed that speed of operation improves after a shut down of the phone and then start up
    Cheers
    Lory

  • IOS VPN will not respond to Cisco VPN Client connections.

    Hi all,
    I am about to set my routers on fire here.
    I have two 2921 ISRs both with Security licenses on separate leased lines. I have configured one to accept VPN connections from our Cisco VPN Client remote workers.
    I have followed the set up process I used on another site with an 1841/Sec router and the same clients and I have also checked against the config given in the latest IOS15 EasyVPN guide.
    With all debugs active, all I see is
    038062: Dec  8 14:03:04.519: ISAKMP (0): received packet from x.y.z.z dport 500 sport 60225 Global (N) NEW SA
    038063: Dec  8 14:03:04.519: ISAKMP: Created a peer struct for x.y.z.z, peer port 60225
    038064: Dec  8 14:03:04.519: ISAKMP: New peer created peer = 0x3972090C peer_handle = 0x8001D881
    038065: Dec  8 14:03:04.523: ISAKMP: Locking peer struct 0x3972090C, refcount 1 for crypto_isakmp_process_block
    038066: Dec  8 14:03:04.523: ISAKMP:(0):Setting client config settings 3E156D70
    038067: Dec  8 14:03:10.027: ISAKMP (0): received packet from x.y.z.z dport 500 sport 60225 Global (R) MM_NO_STATE
    Below is the abridged config.
    System image file is "flash0:c2900-universalk9-mz.SPA.154-1.T1.bin"
    aaa new-model
    aaa authentication login default local
    aaa authentication login VPNAUTH local
    aaa authorization exec default local
    aaa authorization network VPN local
    aaa session-id common
    crypto isakmp policy 10
     encr aes
     authentication pre-share
     group 14
    crypto isakmp client configuration group VPN
     key ****-****-****-****
     dns 192.168.177.207 192.168.177.3
     domain xxx.local
     pool VPNADDRESSES
     acl REVERSEROUTE
    crypto ipsec transform-set HASH esp-aes esp-sha-hmac
     mode tunnel
    crypto ipsec profile IPSECPROFILE
     set transform-set HASH
    crypto dynamic-map VPN 1
     set transform-set HASH
     reverse-route
    crypto map VPN client authentication list VPNAUTH
    crypto map VPN isakmp authorization list VPN
    crypto map VPN client configuration address respond
    crypto map VPN 65535 ipsec-isakmp dynamic VPN
    ip local pool VPNADDRESSES 172.16.198.16 172.16.198.31
    ip access-list extended REVERSEROUTE
     permit ip 192.168.0.0 0.0.255.255 any
     permit ip 10.0.0.0 0.0.0.255 any
    ip access-list extended FIREWALL
     2 permit udp any host a.b.c.d eq non500-isakmp
     3 permit udp any host a.b.c.d eq isakmp
     4 permit ahp any host a.b.c.d
     5 permit esp any host a.b.c.d
    If anyone can see anything wrong, I would be so pleased and it would save the destruction of an ostensibly innocent router.
    Thanks,
    Paul

    > I actually love you. Thank you so much.
    Sorry, I'm married ... ;-)
    > Im not using a virtual template. Can I get away without the Crypto Map if I use one...? All my tunnels are VTIs
    oh yes, I could have seen that ...
    crypto isakmp profile VPN-RA
    match identity group VPN
    client authentication list VPNAUTH
    isakmp authorization list VPN
    client configuration address respond
    virtual-template 1
    interface Virtual-Template1 type tunnel
    description Tunnel fuer Cisco VPN-Client
    ip unnumbered GigabitEthernet0/0
    ip virtual-reassembly in
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile IPSECPROFILE
    Your isakmp-config and ipsec profile stays the same.

  • HT4623 iOS 6 is not compatable with my Denon dock, how do I dowload a later iOS?

    How do I download anolder iOS?  I loaded iOS 6.0.1 and am unable to use my stereo dock, it won't load all songs and locks up.

    3GS the writing that says iPhone on the back will be silver not grey
    Here's what you do
    1.Make sure your phone is not plugged into the computer.
    2. Put the iPhone into recovery mode (this is NOT DFU mode). Do this by
         a). Hold down both the power/sleep button and the home button until the screen turns black/off
         b). As soon as this happens release the power button but NOT the home button
         c). If done correctly then the Apple logo will appear, KEEP HOLDING THE HOME BUTTON and eventually a connect to itunes graphic will appear. You can release the home button
    3. With the connect to itunes graphic on the screen, plug your phone into the computer. iTunes will start up if it is not already on, and then will say the phone needs restoring. Ignore this and COMPLETELY quit iTunes.
    4. With iTunes off and the graphic still on the phone screen, hold down both the power/sleep and the home button again for 9 seconds (count 100, 200, 300...) or until the screen goes black
    5. When the screen goes black release the home button straight away.
    6. It will start up with the iPhone activation screen ignore this. iTunes should have started up, if not do so. Go to the iPhone tab and either resotre from backup or set up as a new phone.
    You're welcome

  • HT4623 iOS 7 update not available in iPhone 4S

    My iPhone 4S and my iPad 2 are not showing ios7 update. When I go to setting and software update it say iOS 6.1.3 your software is up to date. Why is this and how can I update?

    Apple's servers are busy. Check again in a few hours or tomorrow.
    (89513)

  • My dear during i update my iphone 4s 16 giga  to ios 7 itis not responde and error 4005  wasfound please help me

    dear sir during updating my iphone 4s 16 giga error 4005 found please help me

    http://lmgtfy.com/?q=iPhone+error+code+4005

  • Xcode 6 iOS Simulator not responding

    the iOS Sim is not responding and I can't import UIKit in playground
    so far I have tried to redownload it but it didn't change anything

    The Xcode 6 beta requires at least OS X 10.9.3, but since it has not been released yet, a better place for your question would be Apple's Developer Forums.

  • How do I reset my iPad when it will not respond to holding down the on/off button

    How do I reset my iPad when it does not respond to holding down on the on/off button.  It went to the Apple icon and is frozen there. 

    Hello charlenefromnew sharon,
    Thanks for the question. After reviewing your post, it sounds like the iOS device is not responding. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iOS: Not responding or does not turn on - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • HT4623 i just upgraded my phone from ios 4 to ios 5 but now its not responding at all

    i just upgraded my phone from ios 4 to ios 5 but now its not responding at all, its just showing connect to the itunes

    If you just updated to iOS 5, then you had to hack it to do so. You can only update to the current version, which is 6.1.2.

  • TS1398 I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays "C

    I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays “Cannot Get Mail” – The mail server “imap.gmail.com is not responding, Verify that you have entered the correct account info in mail settings
    Other times the Wi-Fi connection works fine and it check e-mail or other within few seconds. The connection problems seems to be intermitted
    This issue never happened before with IOS 5 since I bought the new phone in Oct 2011.

    We suffered the imap.gmail.com server problem After an IoS 6 upgrade. The simple solution is to delete the problem account, shut down the iPad, start up again and reenter the account. Everything comes back normally. Good Luck everyone!

  • Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

    Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything.  Looks like the screen is on it's just unresponsive and black obviously.  Has anyone had this problem?  I was updating via wifi right in front of my router and my computer.

    Spoke to a "senior advisor" in the Apple TV department.  Her suggestions:  change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers.  So she confirms that the problem is one of connection to router suddenly dropping out.
    My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue.  It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more.  Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
    My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department.  Make them aware of this problem!

Maybe you are looking for

  • Documents in product master

    Hi, I'm writing an extension to the product catalog on ISA B2B to add some extra links into custom JSP pages from the catalog items. On the CRM system, my functional people have set up a document (specifically a URL)  against relevant products, on th

  • Report Painter and Exchange Rates

    We have not turned on multiple local currencies but we have several company codes that have different currencies.  Does anyone know of a feature in Report Painter that allows reporting of different currencies in one report by using some kind of curre

  • Transferring data from MS SQL Server to Oracle through Oracle's Stroed Procedure

    Hi, I need to access 3 tables of MS SQL Server database through oracle's Stroed procedure. Is It possible? if yes how to do? is there any way of accomplishing this?

  • Placing buttons in several pdf files

    I have about 150 pdf documents and i want to place a button "Previous View" in all documents. Is it possible to do this in a batch file action (with the action wizard?) and NOT in a single file action? Acrobat X 10.1.4 Thanks acronautiker

  • USB Flash Drive not detected after OS X Mountain Lion installed.

    My MacBook Air 11 inch (Mid 2011) suddenly stopped detecting all my USB flash drives a week after upgraded to Mountain Lion. I have a tiny 16GB USB flash drive (Sandisk Cruzer Fit), for daily work, that has never been unplugged from my MBA. Everythin