HT4623 iOS update: I can update to the operating system I want, not to the latest one?
I want to know if I can update to the operating system I want, not to the latest one.
You can Only update to whatever is the Current iOS for your Device.
Similar Messages
-
what QuickTime player does OS x maverics come with? I see ver 7 in my mac. I would like to update to the latest one. Pls advise
1. You install a Mac OS X version which contains it.
2. No. QuickTime 7 isn't outdated; it's a separate product.
(94808) -
I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?
You have to download the individual youtube app now. It is no longer a nataive ios app from apple in ios6
-
Windows Phone 8.1 app keep showing the old version update after the latest one
Recently I just update my app named "TimeKit" (v1.2.2.0), then I start notices that some of the phone will get the old version(v1.2.1.8) update detail on the store, even I try to check from the windows phone website, but it will switch between
the latest version(v1.2.2.0) and old version sometimes, but some of the phone will be fine after a few times(not sure). My own phone always get this problem, not only my own app, also for others app, one of the app was the "Lumia Camera", so
I decided to reset my phone, after reset all the problems are gone, but the same problem appeared to my app again. Also I update another update for my app(v1.2.2.3), still the same. Is it a problem for the store in US region currently, because I try for
others country and works fine.I can take a couple of days for the update to replicate across all the servers.
-
Microsoft Service Pack 2 - not all versions are equal; how to update to the latest one "safe
I posted this under another topic where it was relevant, but thought the instructions I got from Microsoft were useful (as was my experience in using them as I sent back a reply to them with the problems I encountered [none of which were particularly bad]):
One important point to note is that not all Windows XP SP2 upgrades are equal.
I had a different issue and spoke to Microsoft, who advised me to uninstall the version of SP2 I had and reinstall the newest version (the old version was about 70mb, the new one nearly 250mb).
Apparently the old SP2 had quite a few problems with it; I've found the new one to be "simply stress free" since installing...
The SP2 file name I installed (ie the newest at the time I did it) was "windowsxp-kb835935-sp2-enu".
Here's their instructions - I disagree with the way round that they suggested downloading the update (ie I would strongly advise downloading the update and having it sitting on your desktop before doing anything!!! - please see my feedback email to them that follows (you will note that I had problems connecting to the internet after uninstalling the earlier version; this, combined with the fact that I could barely read what was on the screen would have given me a major inconvenience had I not done this)!!! (and don't blame me if it goes horribly wrong - it's also worth double-checking that the version of SP2 the email links to is the most up to date. I've had a quick check myself, and it does indeed appear to still be the most up to date):
MICROSOFT'S EMAIL (make sure you also read my reply below):
MESSAGE:****************************************** ****************************This is an email from Microsoft about your support incident.When replying to this address: + It helps us if you do not include the original message + Please keep the case number (SRxxxx) in the subject lineThank youMicrosoft Product Support Services ******************* The message from Microsoft follows ****************Hi Gregory,Firstly uninstall SP2 by going to Start>Control Panel>Add/Remove Programs and then reinstall it in a clean boot.. Click Start >> Run >> In the run dialog box type msconfig and then click ok 2. Put a dot in selecti've startup 3. Uncheck all of the check boxes that become available except Process System.ini file and Load system services 4. Go to the Services tab along the top, click Hide all Microsoft Services 5. Then disable any remaining services 6. Click apply and then close 7. Finally select yes, this will start in a clean boot. 8. Then go to (http://www.microsoft.com/downloads/d...DisplayLang=en) and download and install Service Pack 29. To return your PC to normal, open the System Configuration Utility, click "Normal Startup", click OK and restart. Then restart your computer and try accessing updates againPlease let me know the results of these methods, particularly if there were any steps that you were unable to complete successfully.
MY REPLY:
HiI successfully carried out the installation on Saturday.A few minor problems ensued (the second one may have cause a novice user real problems! Certainly caused me some concern whilst working through it!). I had to reinstall ATI drivers from scratch (for Radeon 9800 Pro); this was however the only set of drivers that appeared to "detach" itself. The main problem here was that instead of using the usual standard VGA driver (which it does when I uninstall it once a month to install updated drivers), it used some other driver that made the screen very difficult to see (especially on blue backgrounds!). Running ATI's total uninstall program sorted this out however, and fortunately I had the last update package from ATI still on my system. After uninstalling and reinstalling there appeared to be no further video problems.2. After installing SP2 (and before installing above), whilst I was in the process of getting everything up and running (eg installing the security updates) the system randomly froze about 4 or 5 times; the only way to sort this out was to use the power button. I traced this problem to Windows changing my wireless networking settings so that it handled everything; I have a Netgear adaptor the software for which usually controls this (Netgear Smart Wizard). Basically the two were trying to do the same task and causing crashes; on switching Windows management off, things settled down (the Netgear driver did not need to be reinstalled).3. As a minor point, after the upgrade and installing all other updates, I noted that Microsoft Update was no longer running; I had to reinstall it from Windows Update and the messages I got whilst installing suggested that it was still partially installed but that there were problems with it. It now works.4. As a final minor point, I attach the Scan log from Registry Mechanic which I ran after everything was up and running; it fixed various problems within the registry. I note that the majority of errors are inconsequential, but note that a few do relate to the various Microsoft installs; maybe the installer program for SP2/ Media Player 0 need to sort these out in future releases? Don't think they're a real problem though!The instructions supplied worked fine; one thing I would suggest is that users are instructed to download the SP2 upgrade pack to their desktop prior to uninstalling the original SP2; I believe that my internet connection problems started after I had uninstalled the original SP2 which may have caused problems downloading the new SP2. It also ensures that the download is successful (eg if the site was down for maintenance); I was advised whilst uninstalling SP2 that about 20 programs/drivers would not work properly after the uninstall and so the immediate reinstall was vital!One thing that seemed to fix after reinstalling was a problem I was having installing Media Player 0; after installing it previously, every time I checked for updates on it the whole program would reinstall. Now however this has fixed. I will let you know if I encounter any further problems, but things all seem to be fine now, touch wood.....!
Hope this helps!Message Edited by gjc26 on 0-27-2006 02:50 AMOne small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G -
I have not upgraded my original imac system, and there have been several upgrades since then. Can I upgrade now from the original system or do I have to do that in "steps". Is it advisable to upgrade to the latest with this computer?
If you cannot see the above images, CLICKY CLICK----> System Requirements - Yosemite
-
Wont restoring the iPad wipe it? Yes I have things in the cloud but still... why on earth would Apple REQUIRE a complete restore. Im afraid to even do it now because I do not want to lose many many pictures of my little boy, apps, videos and al lthe work Ive done to personalize this ipad.
Someone please let me know whats up!
Thanks.During a normal install of iOS 7.0.6 this does not happen but something clearly went wrong in your installation.
To fix this, connect to iTunes and restore to Factory. Hopefully your iPad will be working again and you can restore your iCloud backup during Setup. -
HT4623 I update to the latest version, now my phone is locked
I up[date my phone now it wants a pass word
JohnIs this phone purchased from an original owner? If so, they didn't wipe the phone for you prior to selling to you.
-
How come I can't update my iPad 1 to the new iOS 6 it says my iOS version 5.1.1 is the latest version?
The iPad 1, coming up on three years since it was introduced, has been given two major and a number of minor upgrades to iOS, more than many tablet manufactures provide. The iPad 1's hardware just can't effectively support many of the features in iOS 6. So I don't think that it's particularly unfair for Apple to no longer provide updates. And yes, I do own and manage a number of iPad 1s.
Regards. -
I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?
You would only be able to restore to a backup to iCloud or iTunes:
Restore from Backup
Cheers,
GB -
HT2188 How can I update to the latest ios version on my ipod touch?
How can I update to the latest ios version on my ipod touch?
Check to see what model of iPod you have:
http://support.apple.com/kb/HT1353
If you have a second-generation iPod, the last version of iOS it can run is iOS 4.2.1. If you have a 3rd or 4th generation iPod touch, see:
http://support.apple.com/kb/HT4972
Regards. -
After updating to the latest IOS 8 on my ipad / iphone etc I do not have any documents on pages, keynotes etc. I have them on my iphone 5S and I can log in on my pc and see al the documents. I have icloud turned on and idrive.
If I start a new document in pages and then try to share this document with the top ring link in pages "share Link via iCloud" a screen notification tells me to "Set Up iCloud. Go to Settings and select iCloud. Sign in and turn on iCloud Drive for Page".
When I go to settings I see that I am signed in.
Please help as I need the documents back on my ipad.Did you have iCloud photo stream turned on for photos? If you did, then you can view your photos at iCloud.com. If you can verify that they are all there, you can do the factory reset. Once you turn on iCloud again after the reset, the photos won't be on the phone but they will still be in the photo stream which you can view on the device. You should be able to copy the photos down to the computer from iCloud. On an Apple Mac computer, iPhoto can view photo stream and you can download photos there too.
Personally, with syncing issues with iTunes, I prefer to use an app called PhotoSync (which is an app in the App Store, Mac App Store, and available from the developer's website for Windows PC's. This App (once turned on for both devices) lets you send photos back and forth within wifi. -
In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!
Sorry for my bad english :S
Please, please help meContact the carrier.
-
I updated to the latest IOS (5.1.1) today and since then Find my friends hang at "signing in" hangs during signing in. I can't back up & start over, every time I open the app, it's hanging there. Can I clear this without losing everything, including the friends that have already accepted me?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I can't get the iMessage or FaceTime to work on my iPod touch. I updated to the latest iOS. I have ensured restrictions are off and 'Set Automatically' is selected under date & time settings. I can enter my apple ID, but it bounces back to the first login screen.
I just hit the home key very fast 3 times and it worked. Glad to see that someone suggested this to another person with a mini. My gremlins are all gone. Yea to the forum .......Marci 73361
Maybe you are looking for
-
Event Receiver to create a List based on a custom template and on lookup field
Hi I would like to have an Event Receiver who is firing by addItem in a list calls Seminarliste and is creating each time a new list based on three columns for add.Lists("Title of the list", "Description of the list", "Custom List Template") I have a
-
Connecting Macbook to Camcorder
I want to connect my Macbook to a digital camcorder and record using iMovie. The camcorder has a mini HDMI out component jack. What is the best way to connect?
-
IPhone 4S only displays in Black and White. How do you restore color?
I have an iPhone 4S. The screen only displays in black and white. How can I restore the color to the display screen?
-
How to analyse actual cost for each operation in Process/Production Order?
Hi all, IN SAP, I know that we can analyze plan cost for Operation in Process Order/ Production Order. However, I can not analyze Actual cost for Operation . I know the object when I good issue material is ORDER, not OPERATION. But, as requirement of
-
This is how to add extra Exif data to Aperture :-)
Folks Often I need additional Exif data in Aperture - which is not available in the standard install. For example - exactly which lens did I use - not just a focal lenght - which might be any one of various lenses I have. Or - which focus point was u