HT4623 ios7.0.6 fails every time trying to update now what?
ios7.0.6 fails every time trying to update now what?
Are you updating over wi-fi, or cellular data? Or through iTunes. If you get the mesaage that the update is not available . Make sure you have the correct date and time on you phone. then try again.
Similar Messages
-
I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.
Hi Emilemny,
Welcome to Apple Support Communities.
The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
-Jason -
I am trying to convert a Microsoft Publisher Document to PDF but it fails every time although the reason is not clear. Anyone else had problems like this and how do I solve it? Thanks. Ray
Hi raythree,
I'm sorry that your PDF conversion is working. Can you please tell me if you're getting a specific error message? Knowing that can help pinpoint the cause of the conversion failure. However, here are a couple of things that you could try:
Clear your browser cache (steps to do this vary by browser).
If you're using a work computer, check with your IT team to confirm if you have firewall/proxy settings that restrict the ability to upload files to the Internet.
Try another web browser. A list of supported browsers for accessing the ExportPDF service is available here: http://www.adobe.com/acom/systemreqs/.
Also, note that there is a 100MB file size limit, so if your publisher file is larger than that, it won't upload to ExportPDF.
I hope this helps. But let us know if you need further assistance.
Best,
Sara -
I have been trying to update my cc info but for some reason it has kept saying the cc info did not match with the bank info so the transaction failed every time I made an attempt to download something even it was free. However, I saw my cc online got charged $1.00 everything I was trying to update my cc info ...why?
Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.
-
I am trying to export the PDF file and conversion fails every time.
I am trying to export the PDF file and conversion fails every time. File is too large of too complex. What do I do? One file is about 55 mb and the other is 58 mb.
Try extracting part of the file and see if the extracted part can be Exported. If so, repeat with the next set of pages. When done, try to load all into the first file.
-
I am unable to make calls after updating ios7. Its saying call failed every time
I am unable to make calls after updating ios7. Its saying call failed every time when I make a call to anyone.
follow this thread https://discussions.apple.com/message/23340070#23340070
-
Although all my music shows on my laptop in iTunes it won't complete the sync process, the blue bar showing music disappears during syncing. My music actually shows on my phone as ready to download but fails every time, it's all been cleared and retried but fails
Although all my music shows on my laptop in iTunes it won't complete the sync process, the blue bar showing music disappears during syncing. My music actually shows on my phone as ready to download but fails every time, it's all been cleared and retried but fails
-
My installation of Adobe Acrobat Professional 11 UE MAC ESSC fails every time I try it. I don't know how to contact Adobe to get help. I am running Mac 10.8.5. Galen Strawson
I don't have this machine but here are a few things you could look at; that is if you haven't already.
Things you could try:
Changing up the Bios Settings.
if it came with win 8. it is probably runs a uefi firmware. These often have a bios backwards compatibility mode. You could try checking those options and turn off secure boot and turn on the bios backwards compatibility mode and see if win 10 will install.
if it came with win 7, it may have a bios with those features not turned on; if that's the case try turning them on.
Note: you may lose/gain security features or boot speed by disabling or changing some of these features. But it may tell you if a uefi firmware or bios settings incompatibility that could be causing your installation issue. You could also try a different
HDD.
Also you didn't mention whether you were trying to install from a usb stick or if you burned the iso to a DVD. If you are trying from a USB and have a DVD drive. Try burning as a DVD. I had dell lattitude that would never install from my usb; it would start
installing but then it would stall, but from a dvd in the dvd drive it installed alright... kind of weird (I was installing win 7 not 10, so not sure whether it would make a difference on win 10.)
Win 10 may also run but the install is borking on your machine... this is unconventional and surely not recommended, but you could put that laptop hard drive in another machine and run the install. Then on the last reboot swap the hard drive back into your
laptop and see if it boots up.
This may allow you to try running the os and see how it works on that laptop, if that's your goal. -
Aperture library conversion to AP3 just Fails - every time
I just upgraded to AP3 from AP2 with the upgrade disc - and it wont allow any library conversion at all - just pops up "update failed" after only 1 sec EVERY time.
tried deleting and reinstalling AP3 same thing
help???You should get a request to login that is used for the activation on the subscription services.
-
Update to 10.5.1.A.0.283 fails every time
Update to 10.5.1.A.0.283 fails every time
It is Xperia Tablet Z SGP321, no branding, no SIM lock.
In the past only Sony original firmware were flashed.
Currently 10.4.1.B.0.101 is inside.
Update to 10.5.1.A.0.283 using PCC fails on every attempt.
PCC was updated to latest available version.
The whole progress looks like following
- first PCC carries out the preparation stage
- than PCC reports to carry out download
- as soon as progress bar at approx. 50% of whole scale the preparation stage
is entered again
- it takes very long time, between 5 and 10 minutes, till the progress bar reaches
nearly 100%
- download procedure ends with following message
error code 10, a hint to check firewall settings if PCC and Sony Update Engine
are passed through, a hint to retry later
- switch off firewall
- switch off antivirus
- disable all protection mechanism in Windows EMEA
- uninstall PCC, reboot, install PCC of current version again
All the above measures do not help.
One week ago the Sony Support claimed I should retry some time later.
How long do I have to wait for retry? a week, a month, a year, 10 years, 20 years?
It is a big effort to get this device close to the windows desktop device
with PCC installed and running on it, to get connected this device with such windows desktop device,
to invoke PCC and the update procedure. All this effort just to see in the end the update
does still no succeed!!!!
How long do I have to live with Xperia and obsolete Android on it?The point of trying a different computer is that it gives information.
If it works you know that your PC is the problem.
If not, you have to look further.
And finally - if nothing works - you can try to flash it.
My Sony z is working like reborn after a clean install.
It takes some time to learn, but after that it isn't that difficult.
My tablet works like before KitKat (sd-card) , but with the new functions.
No serious bugs whatsoever anymore.! -
So I am wanting to back up my MacBook to time capsule. I have time capsule all configured and the drive shows up just fine to all of the computers on my network. When I go into time machine preferences, the disc shows up so I add it. Last night I plugged my computer in over ethernet first before doing the first backup. I went to bed and woke up the next morning with an error saying "Unable to complete backup. An error occurred while writing to the directory" or something similar to that. The disk image (sparsebundle) was still mounted on my desktop and I am unable to unmount it without restarting. I restarted and tried again and it said it was unable to mount the image. I then deleted the image to start over and also excluded lots of stuff just to see if i can get anything backed up. It creates the image and starts copying stuff over and gives me the same error I got the first time.
What is causing it to fail each time?
Thanks!Mine is doing the same thing - it backs up about 50% of the way through, then fails with the same message. It was working for a while, now it's stuck and fails every time, and I haven't found a way to get backups to work again. Prior to this, it had occasional errors while trying to access data, but this is a new behavior. The Time Capsule has been a miserable experience so far...
I've pretty much given up on assuming my data is actually safely backed up with this product. -
Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?
I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well. -
I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!
Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?
-
Import from iphoto fails every time.
Import from iphoto fails every time.
It should not be a serious flaw, since this something that you only do ONCE. You don't want to use both organizer and iphoto. You'll have two sets of photos with no knowledge of each other. Import from iphoto is not meant to be a regular use item, only for the one time after you've decided organizer is what you prefer. It's fine to make a small test catalog while you decide whether iphoto or organizer suits you better, but to keep on using both is going to make you crazy in short order.
-
IPhone 5 iOS 7.1.4 Call failed every time when the other person hung up before me
iPhone 5 iOS 7.0.4 says Call failed every time when the other person hung up before me,
Is there anything I can do to about that please?Hey there Yonidawit,
It sounds like you are are getting a message saying that the call failed, when the person you are talking to hangs up. I have a few things to recommend here. First close all the open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test it out again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve it, try resetting your network settings:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Regards,
Sterling
Maybe you are looking for
-
Threads does not work correctly
The follow program working with threads. We have two classses : Producer and Customer which working with the same object (which type is class Q). Producer produces data. Customer should capture the data. The Q class must be synchronized. But code doe
-
WHY are there pages missing in my HTML to PDF conversion?!?
Hello all~ upon converting/saving webpages to a PDF file (using the "Convert Webpage to PDF" command), there are pages occasionally missing after the conversion. Sometimes the pages are completely gone & sometimes you can see the pysical page, but it
-
I have purchased a new iMac and I have an Logic Pro version 8 installed on my Mac air. Can someone tell me how to migrate it to the iMac since I misplaced my CDs.
-
Hi, I want to display PDF's with multiple pages as a slideshow. This is possible with a default Adobe Reader and have this working for ONE pdf file. But I want do display multiple PDF's as a slideshow, the one after the other. In Adobe Reader you can
-
SOA Server on Linux never gets started.
Guys We are trying to install SOA Suite 11g Version 11.1.1.5 on Linux but it nevers gets started. A thread was posted earlier but didnt get help. Here is the earlier thread soa-infra goes down time everytime We tried each and every possible solution