HT4623 ipad original unable to upgrade to 106

i have a two year old ipad one .it is still in use every day , today i lookes at itunes and it asked me to upgrade to io.6 well it comes back "io.6 not suported on this ipad (ipad 1st gen)   come on it looks like now i get itunes uk not suported or avaiable on this ipad .help please .does this meen i need to buy a ipad 4/5/6 what ever .thanks

A first gen iPad can only be updated to iOS 5.1.1 - if yours is on 5.0.1 (Settings > General > About > Version) as your tagline suggests then you should be able to update to 5.1.1 via Settings > General > Software Update directly on your iPad. But before you update first take a backup and copy any purchases over to your computer's iTunes (File > Devices > Transfer Purchases), and preferably take your own backup copies of any important documents, files etc

Similar Messages

  • HT4623 I pad unable to upgrade

    I pad unable to download ios7

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4623 IPad 2 will not upgrade to IOS.70, keeps saying I am not connected to WIFI when it is connected.  Even tried turning of Advast VPN

    I cannot upgrade my IPad 2 with IOS.70, the download appeared to be complete but while it was verifing a "not connected to WIFI" message appeared yet IPad was connected and working.  Not sure what is wrong, even tried to turn off Advast VPN thinking that was the issue but cannot complete upgrade.

    try resetting your phone by turning it off and back on again. Also try resetting your network settings under Settings > General > Reset > Reset Network Settings.

  • HT4623 i am unable to upgrade my 4s from 5.0.1 to ios6 both OTA aswell as through i tunes?

    I am unable to update my iphone 4s from ios 5.0.1 to ios 6, i tried both OTA aswell as through i tunes. It was unseccessfull. What could be the reason?

    I would suggest that you tru and update through iTunes on your computer. Also, could you connect your computer up to the internet using a wired connection rather than wireless - this will be faster and more reliable, particularly when you need to download a large file.
    Then try your update. This time, in iTunes, why not try to get it to download the sofware first (Download Only). You can then appy it to your iPhone later, once it has downloaded.

  • Has anyone been unable to restore their iPad after attempting to upgrade to ios5? error 1

    Has anyone been unable to restore their iPad after attempting to upgrade to ios5? I get an unknown error 1 message. Thanks.

    I have the same problem. Something happened during the download and froze iTunes. After spending three days searching these forums with the dead iPad, the only thing I got to work was to try downloading iOS 5 using my sons computer. This worked. However I cannot now get my computer's iTunes to sync with my iPad.. It contains the same error message (1602) and has the same problem as before. It is not an antivirus problem. I need some help too

  • How do i upgrade my Ipad original version

    I am having a difficult time connecting to WI-Fi and was told that i need to upgrade the IPAD original.
    What should i do and who can help me upgrade?

    If you mean update the OS, just plug it in to iTunes, click the device in the left-hand panel, click the Summary tab and click the Update button.

  • HT4623 My iPad 2 unable to update to iOS 8. Message reflected that iOS 7.1.2 is the latest.

    My iPad 2 unable to update to iOS 8. Message reflected that iOS 7.1.2 is the latest.  Need help. Thanks

    connect ipad to computer, launch itunes and update from there.

  • HT4623 Can a ipad 2. Be upgraded to iOS 7?

    Can a ipad 2. Be upgraded to iOS 7?

    As Courcoul mentions you amy still be ablew to get compatible versions of Apps for your device.
    You will have to download the App to iTunes on a computer or another device that does support the App using the same Apple Id you have on your iPad.
    With that done you can follow these instructions from your iPad to get a compatible version:
    App Store: Install the latest compatible version of an app
    http://support.apple.com/kb/ht5919

  • I installed iOS 5 on my iPad and unable to  Download from iTunes store

    I installed iOS 5 on my iPad and unable to  Download from iTunes store

    Hi all...I just got a solution to the problem. It's foolproof. Connect your iPad to your PC and re-install iOS 6. In case you would like to know how - Click on iPad in iTunes and then click on restore button. Then just follow the steps from there on. It worked for me. I know this is a "not-the-desired" solution, but it will fix your problem. For me it solved another problem - I had noticed a deterioration in speed when I had originally upgraded from 5 to 6. After doing this re-install, I can confirm, there is a noticeable difference in speed...across the board, including Siri responses. Thanks and best of luck.

  • I have the ipad original last week was prompted to download updates and now all the movies that once were full screen are now 3 inch across and i can ot get full screeen please can anyone help me get full screen agian

    i have the ipad original last week was prompted to download updates and since then the movies that i had on the ipad are now only 3inches in length were before i was able to watch in full screen please can anyone tell me how to get full screen, apple support were not able to assist me

    SeanD - message sent - any chance of a follow up
    Getting Worse
    . Best Effort Test: -provides background information.
    Download Speed
    13083 Kbps
    0 Kbps
    24198 Kbps
    Max Achievable Speed
    > Download speedachieved during the test was - 13083 Kbps
     For your connection, the acceptable range of speedsis 12000-24198 Kbps .
     Additional Information:
     IP Profile for your line is -24198 Kbps
    2. Upstream Test: -provides background information.
    Upload Speed
    1607 Kbps
    0 Kbps
    2000 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 1607 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 2000 Kbps
    We were unable to identify any performance problem with your service at this time.

  • My iPad was disconnected during upgrade. I've tried restoring and resetting.  I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer.

    My iPad was disconnected during upgrade. I've tried restoring and resetting.  I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?

    Unable to update or restore
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • Unable to upgrade Camera Raw with CS4 in Lion...

    Hi All,
    very frustrating; I have been unable to upgrade Camera Raw despite several attempts.
    I've downloaded the latest version as an upgrade; I've done Software upgrades through PhotoShop, but for some
    reason these do not seem to have taken, ie., the version of ACR in Bridge preferences remains 5.0.
    This makes it impossible for the computer (a brand new MacBook Pro) to read or convert to DNG raw files
    from a Nikon D300S.
    Oddly, ACR 5.0 converts raw files from a D700 just fine.
    Also puzzling is that my attempt to upgrade to ACR 5.7 in a 5 month old iMac have been smooth as silk (OS 10.6.7)
    Help!
    Stu Rosner

    At one point, I was one of the most vocal critics of camera raw in the CS4 / Lightroom v2 days. In short, I felt that there was not enough control over noise reduction and fine detail rendition when processing digital camera raw files, especially at higher ISOs, although I had been quite pleased with earlier versions. That all changed when CS5 / LR v3 was released. You now have an enormous amount of control over exactly how much sharpening and how much noise reduction will be applied to an image. The amount of fine detail one can extract from a low-ISO raw file is extraordinary. When you crank up the ISO and an image gets noisy, you now can choose whether or not you prefer a smoother look at the expense of some of the more subtle texture details, or a slightly grainier look where one has a feeling that no significant fine details are lost from the original capture (what I prefer). The raw processing defaults in Adobe's latest software are good starting points, but for my personal tastes, I generally do modify them a bit with less NR and slightly more sharpening at a smaller radius.
    Even out-of-camera JPEG files will benefit from the new processing engine. I find that turning down the sharpening and NR in-camera, and then applying some subtle tweaking in LR, for example, makes for much better looking images even when starting from a JPEG. If you are a raw shooter, like I am, then upgrading to the latest Photoshop and Lightroom is absolutely 100% worthwhile in my opinion!
    I personally feel that the quality of raw conversions in Adobe's latest software are pretty much the best there are. I have used many other raw converters (Capture One, Aperture, RAW Developer, Silky Pix, Canon's DPP etc.), and while each have their strengths, overall I far prefer the look of the final image from Adobe's latest software. Sure, I might find the colour rendition slightly better, in some cases, from some other raw converters, but colour I can fix. Poor detail rendition or heavy-handed/crude noise reduction I cannot.
    EDIT: Also should mention how good the lens correction controls are. Not only are there automatic lens corrections available (possibly of limited use with an M8 due to potential lack of lens EXIF information), but the manual corrections are extremely useful. Chromatic aberration, vignetting, highlight fringing and distortion control all work extremely well and are minimally harmful to image quality, unlike performing those same corrections in Photoshop after the raw conversion stage. You also have excellent perspective corrections that, amazingly enough, seem to have very little impact on image quality even when fairly dramatic adjustments are made.
    Lastly, I own both Noise Ninja and Topaz DeNoise and since upgrading to Adobe's latest software, I don't think I have felt the need to use either of those two third party NR plugins once. Purely from a noise reduction standpoint, upgrading to CS5 or LR v3 is almost like getting a new camera, almost like moving from a cropped sensor to a full-frame as far as high-ISO image quality.
    I would suggest you download Lightroom v3 and give the 30 trial version a whirl. Spend some time in the Detail section of the Develop module and make sure that for each image you are looking at, ones that you may have edited in previous versions of Camera Raw or Lightroom, that you have "2010(Current)" chosen in the "Process:" section of the CameraCalibration tab in Develop. That will ensure that you are fully benefitting from the latest raw conversion engine. Zoom in to 100% before you tweak the Detail settings to make sure you are seeing actual pixel-level detail. I think you may be amazed at what you can do...
    Regards,
    Mike Mander

  • HT4623 ipad 1 how To update iso?

    How to update iso for iPad 1?

    A first generation iPad can only be upgraded to iOS 5.1.1 and no higher.
    If you are still running iOS 4, you cannot upgrade over the air, as that feature was only introduced with iOS 5.  You would have to plug the iPad into your computer and use iTunes to upgrade, see:
    http://support.apple.com/kb/HT4623 for instructions of how to do this.

  • HT1620 I have an I pad mini and I am unable to upgrade to I os7 what can I do?

    I am unable to upgrade to ios7.I did not upgrade to 6.1.3 but it is not allowing me to upgrade because the button is not available

    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    Make sure you have the Latest Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

  • Music albums purchased in March are no longer in my iPad and iPod after upgrading to iOS 7 why?

    After upgrading to iOS 7 all the music albums purchased in March are no longer in the iPad or the iPod although in the iTunes Store are shown as purchased. How I can get them back?

    Your original post:
    I upgraded an iPad 2 to iOS 7 and since then SIRI no longer works when pressing the HOME button.  The settings for SIRI has also disappeared in the GENERAL settings.  I have searched and found no posts with this issue!
    iPad 2, iOS 7
    You're most recent post:
    fldaze wrote:
    I have the iPad 3 and believe me it had Siri before the upgrade!
    Perhaps it might help if you posted your model number as it seems unclear which iPad you actually have. Settings>General>About
    Best of luck.

Maybe you are looking for