HT4623 Ipod 2 days old and not working
I have a 2 day old ipod touch 5th generation 16GB.
It worked for 2 days and now won't work.
Any tips?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
The button on my iPod touch is hard and not working properly
I have bought an iPod touch 4G est year (2012) and the start button is hard and sometimes when I give once calcase responds as if twice. I have an iPad and the button is softer and I have friends who have an iPhone and is also soft.
Regards.Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Ipod making weird noises and not working
Ok so I recently have been having problems connecting my ipod to my computer. I plug it in to the usb cable, with itunes up. The ipod goes to the do not disconnect screen and itunes freezes. It stays like that and nothing changes. While this is happening my ipod is making a clicking sound. I have to hit control alt delete to get itunes to shut down then unplug my ipod with the do not disconnect screen up. Now all of my music is erased on my ipod. What should I do?
I also have the same problem, and my songs as well were deleted, although after messing around with my ipod(turning it on and off/restarted it) my songs suddenly reappeared! This was without plugging it into my computer obviously because every time i would do that the programs running it would freeze.
So looking at all the frequent numerous posts about this problem it looks for now like the only option is to send it in to apple.
The good news is that if it is under warenty (which mine isnt (sniffle)) then they will cover everything including shipping. They will look at it and probably replace it with a new or refurbished one. But you will not get the same ipod back, or the songs. -
I can't turn it off any longer, and the little bar thingy that shows you how much longer the song has to play no longer scrolls across the screen.
It was working earlier this evening, but when I used the removable storage thingy it stopped working.
I have my 'sleep' timer set to 5 mins, and my idle time set to 5 mins, and it has been paused for about 30 mins, and is not turining off...
Help!If you're feeling insecured, you can just return the player and get a replacement set - creative has a 7 days -to- exchange programme. Contact customer support or your retailer before making the replacement.
-
I recently updated my iPhone 5 to iOS 6.1 and lost all of my contacts. My phone was less than 30 days old and I did not have an account with iCloud prior to the back-up. Any way to restore my contacts or are they lost forever?
I have the exact same problem. I did the update on my iPhone 5 yesterday, opted for the iCloud set up in the update and then it wiped my contacts. They are not on my phone or in the cloud...
-
the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?
it might be a malfunction in your device. you might ave to send it to repairation
1.ave you try resetting it or restoring it?
2. did your hold boutons whas working beffor? -
Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6
Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave -
he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..
As advised, you need to call Apple about this.
http://support.apple.com/kb/HE57
No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
Good luck. -
i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks
If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
Hi my 4s is only 5 days old and I have the OTTER Box from day 1 and it has turned off by itself and will has not turned back on some help let me know what to do I'm dieing over here
If it is only 5 days old, take it back to where you bought it
and get it replaced. -
I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?
Did you place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
my ipod nano FM radio does not work it only has European band and japan band and when you search to find a radio station I cant hear anything. Help please!!
Hi kahli:
Have a look at http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf
AND
http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf -
I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?
Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
(Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.) -
My two month old iPhone lightning cable is suddenly corroded and not working. Any solutions to this apparently common problem on the horizon?
You bought a used iPhone. Amazon is not an authorized supplier of iPhones, nor are any of the 3rd parties that sell iPhones there.
You can make an appointment at the genius bar and have it looked at.
If you are very very lucky, it is still under warranty and it wasn't opened or otherwise tampered with before you bought it. In which case, Apple will replace it under warranty.
If it's not under warranty, they will replace it for $199.
If it has been opened or tampered with, they won't touch it. -
My last Time Machine back-up is 45 days old and only of User Account files (not entire HD) and I must now reinstall Lion (via internet) without performing a new back-up. Will any new User Account files, since my last back-up, be lost when Lion reinstalls ?
Reinstalling OS X doesn't affect user data, provided nothing goes wrong. But it would be very unwise to assume that nothing will go wrong, especially if you're having (unspecified) system issues. You should try to back up all data before you reinstall or do anything else. There are ways to do that, even if you're unable to boot.
If your backups include only user files, you won't be able to access them in Setup Assistant.
Maybe you are looking for
-
We are close to finishing the first pass at upgrading our R/3 6.4 SAP system to 7.20. However the restart of the T03 system has stopped at the MAIN_NEWBAS/STARTSAP_NBAS phase. This is the error message. Checks after phase MAIN_NEWBAS/STARTSAP_NBAS we
-
Hi Gurus, Our problem is as follows, We have two plants A and B. some materials are produced in A and some are produced in B. we use strategy group 22 for make to order production. materials are always delivered from plant B. so when we load a sales
-
I'm using ReportViewer from MSSQL 2014 express in my experiment, use RDLC /local reports/. I use slovak char-set (šťďňľřôä) - international chars. When rendering to PDF I use HumanReadable PDF + Use font sub-set embedding. The report is viewed on the
-
Displays not working (VGA)
I purchased an unibody MacBook in 08/09 and I purchased a VGA adapter cable. I recently purchased a 2011 MacBook Pro, however my VGA cable does not work. Do I need to purchase a new VGA cable? My local Apple store told me that even though Apple has c
-
Hello , Assembly finished with errors , when I check the logs found the logs from repostory-export as below. please provide me inputs to resolve this issue 20090313124906 Info :Starting Step Repository-export at 2009-03-13 12:49:06.0432 +1:00 20090