HT4623 Is iOs 7.0.4 work fine with iphone 4?
Is iOs 7.0.4 work fine with iphone 4?
I thought it was OK on my iPhone 4 but there have been an unusually high number who felt it was slower. I've seen reports from beta users of 7.1 who report it is faster so you may want to wait for that release.
Similar Messages
-
Bluetooth worked fine until I upgraded to iOS 5. Now I can't make calls. Get bluetooth symbol in car but no signal strength bars. Try to make a calll and can't do it. Music is also intermittant. Wifes phone ( Samsung) works fine. Problem began aftger upgrade
I fixed a similar problem on my Audi after hours of struggle!!!
I turned off Siri from settings. I deleted bluetooth pairing with my car ("forget this device"). I re-established bluetooth connection. I turned Siri back on. All fine (so far).
It seemed to be Siri related.
If this works for the rest of you kindly pass it along to one or two of the other 1000 posts on this issue. People are very frustrated right now. Its not just Audi and Lexus and Ford - its every make/model on the planet! This one is not obvious.
Let us know if it works for you. -
Can connect to router but not ad hoc network. Works fine with iPhone.
My brand new ipad on ios 3.2.2 connects fine to my router and my jailbroken iphone running Mywi. However, I cant connect to an ad hoc network set up on my laptop running vista. My iphone connects to the ad hoc without any problems. I've tried everything, static ips, wep, wpa, hard resets, restoring, resetting network settings but no go. How can' everything else be fine but not connecting to the ad hoc network, especially since it works fine to connect with the iphone?
Btw, the ad hoc is for controlling music software on the laptop through wifi. It's not for getting internet.
Can anyone shed some light on this?
Many thanks,
LHi and welcome to the Apple Discussions.
Did you try doing a search, upper right corner of this window, on remote control? There have been a number of discussions during the last two weeks about remote control problems.
There have also been discussions about networking an iPad via another computer, such as iMac or MacBook Pro, using the computer's wireless card rather than a router.
See if one of those will answer your question. -
When I connect (I have it set for Auto DHCP) the IP address that I get is a "bad" address - first 3 digits are 169. There is no router IP address on summary page. Any ideas?
169.***.***.** is a self-assigned IP address. The system does this when it cannot obtain a functioning IP address from the DHCP server. There can be myriad reasons, but the following Apple help page shows the way out.
http://support.apple.com/kb/TS1920
Good luck
Max -
Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode. What changes I have to made to work great in iOS 7 also.
I rewrote code for debugging purpose and tried to catch error using GetLastError(); method,
but it only printed 0. Below is code snippet; I think Create() throw an exception
and code goes to catch block.
LONG ConnectTS(CString strIP, UINT n_Port)
try{
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
// Exception Line
n_Err = GetLastError();
return NET_INIT;
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image
System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Output: -
ConnectTS is calling Create [is going to call]
Image System
0 -
After updating to iOS 6.0.1 "Yahoo! Server Unavailable" but works fine on iPhone. Help please!
after updating to iOS 6.0.1 "Yahoo! Server Unavailable" but works fine on iPhone. Help please!
GIve it time. Yahoo has been have persistently random issues in past weeks. If you don't want to wait, you can try deleting and readding your account info.
The issue is on yahoo's end and all their updates/upgrades. -
My apple extreme wireless network is working fine with two Macs but ios devices (iPhone & iPad) will not connect. I can see the network and it's telling me I'm connected but Safari says I'm not connected to the internet. Everything was working until the ISP went down. Any suggestions?
Thank you, I've tried the support tips (resetting the network, checking security settings, etc.) and rebooting the network devices several times to no avail. I've actually been working on this for several days (when I can afford to have the network down).
What I have to determine is what has changed in the setup...from when it WAS working just fine with all devices. -
I really don't want to lose all of the music I have on my ipod touch. It worked fine with my ipod and my old laptop but I got a new laptop and now it doesn't want to sync anything except purchases I made on the ipod and everything that was in the cloud. The rest of the music on my ipod is from old CDs and I am away from home. I would greatly appreciate it if someone could give me some advice. I also don't really want to pay for a download that moves the music into itunes so if anything is free and safe that would be great or if there is a way to do it manually. Again thanks to anyone who has advice to share.
You would have to purchase a 3rd party program ( not supported by Apple).
The ipod is not a storage/backup device.
Copy everything from the old computer or your backup copy of your old computer. -
my voice call services is not working with cellular network...only works fine with wifi..please help?
Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express. -
After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other bluetooth devices. I haven't moved to iOS7 yet. Any ideas?
What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either. -
My iPod touch charges but no longer plays thru my Onkyo or Phillips home theater systems. Works fine with friends iPhone and both systems worked fully with this iPod in the past.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
No Service message. Works fine with other SIM
Hi everyone. Been having a really frustrating problem over the last few days. Hopefully someone has seen it before. On Sunday, my Iphone 6 suddenly got a 'no service' message where my signal used to be. I thought nothing of it until after driving 230 miles i still had no signal. I tried the following: 1. Reboot phone2. Take SIM out and put back in3. Reset Network Settings4. Full reset of Iphone using Itunes and full IOS 8.4 download5. Tried my SIM in another phone6. Tried another SIM in my phone - this worked straight away and came up with 4G EE So i thought, the SIM card is probably knackered so I went into an EE shop and got a replacement SIM card and they tranferred my number across (24 hours wait). But put the new SIM card in and still No Signal message appears. I try the other SIM card from earlier and this still works straight away 4G EE. I then noticed that if I tried to ring my own number from a different phone, instead of it going to my voicemail as usual you can instead hear a short beep and then the call is disconnected, sort of like when you ring a number that has been disconnected. At this point I contacted EE by telephone to try and get some help. They said there was an 'update' waiting to go through on my account and also that my account had no profile set up on it and it would take another 24 hours. But just after this, I decided to try my OLD sim card again and this worked straight away 4G EE. This is the sim card that my number was transferred from. This worked for about 2 hours and then again I got "no signal". This time I tried to put the new sim card in and it started to work again 4G EE. I could make calls, receive calls and if you called my number and my phone was turned off it went to voicemail. This then worked all day today so I thought the problem had gone away. So to recap I was now using the new sim card and it was working, BUT THEN....just now I have got 'no service' message again. This time putting the old sim card in does not fix the problem. It stays at "no signal'. If I put another EE sim card in (the IPAD one) it comes up with EE 4G straight away. Putting either of the SIMs that are allocated to my phone number gets 'no service'. Also if you try and ring my number, it again gives you the disconnected beep instead of voicemail. This looks to me like there may be a problem with my number on the EE server?? The problem I'm having is that it is very difficult to convice the phone tech support people of this, they keep telling me to turn my phone off and on, reset it, all the usual scripted rubbish and wait 24 hours but it works fine with the IPAD sim card (which has a different phone number) Any help or ideas would be appreciated because last time something like this happened was when I tried to tranfer my old number across and after 2 weeks I had to give up and get a new number because the tech guys didnt fix it. Cheers, Si
Hi, I have had exactly the same problem as you. EE reset my account, I did several Network resets. No joy. Got a new SIM from an EE shop yesterday, started working about an hour ago, only to stop working 30 mins later. Switiching phone on and off, performing Network resets haven't helped. Phoned EE. They promised it would be sorted by 8AM this morning. Here's hoping..... In the meantime, I have topped up a PAYG SIM which works perfectly. Looking at this forum, Twitter and Facebook, tens of thousands of users appear to be having a similar problem. Seems to affect the whole country and be fairly random in whom it affects (None of the other phones on my account are affected).
-
Hp 3510 prints only blank pages from i-pad, but works fine with xp configured lap top. why? help!
i have an hp3510 wireless printer that worked fine with both my i-pad and on my laptop when 1st installed. now it will only print blank pages with the i-pad although it still works fine when using my xp configured laptop. can anyone tell me how to correct the i-pad problem so that i can print wirelessly using that device?
thanks!
This question was solved.
View Solution.I would start by powering down the Apple device, make sure that you hold the power button down, and slide the bar on the screen to "Off". If you have more that 1 iOS device that you use with the printer (like another iPad or an iPhone) power them down at the same time. Then turn them all back on and try to print to the printer.
If still having a problem, I would then power down the printer, router, and Apple device.
1. Unplug the router, (most do not have an on/off button)
2. power down printer and Apple device
3. Wait about 20-30 seconds
4. Plug router back in and wait for it to be fully operational and all the light on it back as they were before unplugging it.
5.Power printer and apple device back on (check to settings of iPad to make sure that it is still on the same network as printer and that "Ask to join other networks" is ON).
6. Reattempt to print
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved? -
TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.
Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.
Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.
-
I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydasOk... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.
Maybe you are looking for
-
File Sharing with XP: Odd Problem
Here's a weird one. I am unable to share files between my iMac and XP computers via my Linksys WRT45G router when the iMac is connected wirelessly. I believe that sharing is set up properly on both computers because, when I connect via ethernet cable
-
Import script to remove zeros in Account field
Dear FDM Experts, The problem is our source system always extracts 10 characters but we use 7 characters in HFM. Example, Account 0001201010 (10 characters) must be 1201010 (7 characters). I want to write an Import Script to remove, if any, all zeros
-
Hyperion IR service is not starting
Hi Team, I am unable to start Hyperion IR service as a windows service. ERROR when I start the service "hyperion reporting service1" the system sent a message "The Hyperion S) BI+ 9.3Interactive Reporting Service 1 service on local computer startedan
-
Drop Shadow Filter hiding inside the Hbox container
Hi, I have an HBox with roundedRectangle skin inside a repeater in a vertical layout. HBox has drop shadow filter applied on it. Problem is that, as repeater is executing the drop shadow is getting hid by next HBox created below the previous Hbox. I
-
Can't convert PDF to JPEG or Microsoft Word anymore??? Why?
I used to be able to convert a PDF to JPEG or Microsoft Word before. Not I can't without purchasing a paid version of Adobe. Why is that?