HT4623 Is video no longer a camera option with the new upgrade?

I have updated my iPad to IOS7.0.4 and it seems that shooting video is no longer an option. Did I do somethng wrong?

JimHdk - I can't move the options when I'm in the camera app. The only option highlighted is Photo. There is Video above and Square below, but neither seem "active."  Is this where you were talking about?

Similar Messages

  • Can I upgrade the video card in my 2009 iMac with the new ATI 2 GB VRAM card?

    I am looking for more video RAM for video, CGI and animation work in Blender.
    I may purchase Final Cut Pro X in the near future and I need to make sure there is enough video RAM to be able to work with this version of FInal Cut.
    I, currently, use Final Cut 4 Express and though this runs fine, through Rosetta, on my current setup, I fear this much newer version may need more graphics power than I have, now.
    I, also noticed some lag when working with Blender.
    No where near as much graphics or video/animation lag as when I using Blender on my old G4m but it's still slightly noticeable.
    I realize I may have to install this myself.
    Can I purchase, somewhere, Apple's 1 or 2 GB ATI card seperately or from a third party vendor and install, myself.
    I have seen posts that tell that the 27 inch iMac has a removable video card and is not soldered to the logic board like in the 21 inch models.
    If true, is there a complete procedure for the iMac breakdown, installation of the video card and reassembly procedure?
    My iMac only has the stock 256 MB VRAM graphics card.
    If the take down looks more difficult than I feel I can attempt, I have an Apple authorized reseller, repair facilty here, in my area.
    Could I purchase the card and have them install it for a fee?
    ThanX for all of the info and advice, in advance
    Michel

    You will need to check if your model originally was offered with a custom build option that included a different graphics card. If so, you may be able to have it done; here is a fellow who managed to do it on a 2011 iMac (graphics card not soldered) and the model originally offered a better card option:
    https://discussions.apple.com/message/18919734#18919734
    Is this yours:
    http://everymac.com/systems/apple/imac/specs/imac-core-2-duo-3.06-27-inch-alumin um-late-2009-specs.html
    In particular, click on the link in this section of the specs:
    I'd check either with Apple and/or an AASP to see if it can be done with yours or if yours is one of those where it is part of the Logic Board/soldered to it.

  • HT4623 Can I update my 1st generation iPad with the new iOS software update?

    I have the first generation iPad, and It seems I am no longer able to update iOS.  My applications seem to quit suddenly and my iPad seems to almost be un-usable.  Safari seems to be the application that hardly ever works.  Is there a solution? 

    You can't update your iPad past iOS 5.1.1
    Many iPad 1 owners reported slow downs with iOS 5.
    Under the Settings app, General category under About, how much storage capacity does your iPad have left?
    You could try a hard restart or reset by holding down the sleep/on-off button and home button simultaneously.
    Once the screen goes black, wait about two seconds, then let both buttons go.
    See if this changes anything.
    Good Luck!

  • I am unable to find the burn option with the new iTunes.  It's not under files.

    I have added my audiobook to my list but when I right click on it there is no option to burn it.  What am I doing wrong ?

    Thanks
    Problem resolved itself. Turned out that I had ben unable to contact the App store to confirm purchase. Once this resolved itself program downloaded properly and installation went without a hitch.
    Thanks again

  • HT4623 my phone says i need storage space for the new upgrade, how do I get it?

    help!

    It's talking about iTunes. The program that runs on your computer. Not iOS, the operating system on your phone.
    On your computer, go to http://www.apple.com/itunes
    Download and install version 10.7. It is required to sync with iOS 6.

  • How do I revert back to the old operating system?  The new upgrade that came out totally disabled my WiFi and the default backgrounds changed to white instead of bla k.

    An upgrade was sent to my Samsung Galaxy S5 phone on 3/27/15 and it ruined my phone.  I no longer have the ability to Wi-Fi.  When I swipe the phone on there is a clicking sound and the scree goes directly to my keypad.  I want the phone to go to my home screen like it did before.  My apps that had a black background now have a white background which is impossible to see outdoors.  I want the black background back for settings, clock, and calculator.  Samsung tech support says this stuff is default with the new upgrade.  How do I revert back to the version I had before without having to put the phone back to factory settings and lose all my pictures, memos and other files I have accumulated over the last year that I have had the phone.  I am desparate.  Please help me.  Send an e-mail to (removed)
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

    You cannot revert back without voiding warranty and we cannot discuss the methods to do so.

  • Adding reminders to my calendar items is no longer an option after the software upgrade.  I also can't get to day and week view, only month view.  What's a possible solution?

    Adding reminders to my calendar items is no longer an option after the software upgrade.  I also can't get to day and week view, only month view.  What's a possible solution?  I'm using Andriod version 4.4.2 with kernal 3.4.0.

        @MaloneTP
    Thanks for keeping me updated!  Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air?  Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY.  Keep me posted.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • If someone messages my iphone 6 with the new quick video option when I get it I do not get the option to keep. Therefore it never vanishes. If I send a quick message video to them it has keep listed below the video on theirs.

    If someone messages my iphone 6 with the new quick video option when I get it I do not get the option to keep. Therefore it never vanishes. If I send a quick message video to them it has keep listed below the video on theirs.

    1. Every iPod, since the first generation model back in 2001 (of which I am proud to be an original owner) has always scratched on all surfaces – front, back, you name it, but basically everything scratches and this is nothing new. If you toss your shiny new cell phone into your pocket with your car keys it is also bound to be scratched. Just because the iPod costs about ten times more than your cell phone doesn't mean that the iPod is scratch-proof or will stop a bullet.
    If you go out and buy a brand new, scratchless BMW are you going to expect it to never get a scratch or fingerprint on it? Excuse me, but get real or get a case for it.
    2. Transferring video to the iPod was meant to be "easy" for videos that you have purchased over iTunes. It gets more complicated when you want to "back up" your DVDs or avi files that you have on your computer. Unfortunately, QuickTime Pro is not the fastest option for converting to m4v format. There are dozens of applications out there that will rip your DVDs to your hard drive and a handful more which will take this file and convert it to an iPod-friendly format.
    3. It's possible to use your iPod with more than one computer without it being erased. When you connect the iPod to a computer which isn't the first one you used it with, it will say that the iTunes library is not the same one on your iPod and whether or not you want to overwrite the iPod. Obviously you can click no. In the iPod's preferences (found in iTunes), click "manually transfer songs and playlists". You can now take single songs or entire albums from your secondary computer and put them on your iPod.

  • With the new OS5 I have no video playlists

    With the new OS5 I can not use my video playlists any longer, since the video playlists are no longer synchronized. Is there an alternative? It's not about playlists for the videos in the camera role (here Video Roll would do the job), but for video clips. Thanks!

    I don’t have a solution for the issue of video playlists being removed from OS5 but I sure hope Apple returns the feature.  The Video player app only shows thumbnails alphabetically.  It does not provide a list view option that can be sorted by date created as the Playlists can. Neither does it allow a way to sort the videos into categories like family, work, sports, etc.  Playlists are great for this.  IMO, the removal of video playlists was a really BAD decision. 

  • HT1386 I have a new computer and when I tried to sync my iPod Touch with the new iTunes, it has lost all of my music and videos from my iPod/old iTunes library: including all but 4 songs of my bought songs, videos and audeobooks!

    I have recently updated my computer since my old one broke and therefore had to download a new iTunes. When I came to add my iPod to this new iTunes, I was given no option to transfer the contents of my iPod library to this new iTunes and was forced to try 'sync'; when my old computer was repaired once we lost all of our data so I had to download a new iTunes then,all of my iPod downloads were transferred and I could easily reburn my CDs so I didn't think the wiping of my iPod would be a problem. When I clicked 'sync' it warned me that it would replace the contents of my iPod with the new iTunes library, as I said I didn't think this would be a problembut then it asked if it should transfer my recent iTunes downloads so I said 'yes'. The sync was completed but now I only have 4 downloaded songs and 5 albums which I burned to my new iTunes! I have lost all the music I bought, all the videos I bought and all the audiobooks I bought! (Luckily I still have my apps.) I tried to restore backup but realised that only covers calendars, contacts E.T.C and I checked my iTunes account and that shows all my downloads but I can't see a way to restore them or anything like that!
    Please help! I am in despair as you can imagine how much moneys worth I have lost and am losing faith in Apple

    Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
    As IO said before:
    You can redownload most iTunes pruchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    I do not think it included audio books.

  • Creating a QuickTime movie with the new Canon T5i  camera in iMovie 9.0.9.

    Help needed creating a QuickTime movie with the new Canon T5i  camera in iMovie 9.0.9.  The project is done and looks good...I need help understanding what settings need to be set so I can make a QuickTime movie in the highest quality that would fit the ratio of 16.9 to be sent out to my YouTube page.  I played around with some of the settings and have not come with the right setting for the video.  I want the highest quality with the lowest amount of megabytes…thanks

    I would suggest using SHARE/EXPORT MOVIE and choose 1920x1080 (if your source material supports this).
    That should work well in YouTube.
    If you want to go further with custom QuickTime settings,  here are some that should work, but in my experience, it will be no better than using SHARE/EXPORT MOVIE.
    follow the instructions below to create a .mov video that will work on YouTube:
    In iMovie, select Share > Export Using QuickTime
    Next, you may want to check your Options to verify that the following settings are correct:Video settings
    Compression Type: H.264
    Frame Rate: 30 is preferred. 23.98, 24, 25, 29.97 are also acceptable.
    Data Rate: Automatic
    Key Frames: Automatic
    Frame Reordering: Unchecked
    Audio/Sound settings
    Format: AAC
    Click Show advanced settings and choose Constant Bit Rate as encoding strategy
    Other settings
    Size: Choose the original size of the video
    “Prepare for Internet Streaming”: Fast Start

  • After doing the new upgrade, my security cameras quit working.

    How do I get my security cameras to work with the new upgrade

    Disappointed iOS 6 wrote:
    Can I reinstall the previous iOS , my iphone is now a POS because of the new IOS . My iPad no longer has the YouTube app?? And what happened to google maps?  Galaxy 3 for me and a google tablet seems like a better option.
    No more posts from you then.
    Excellent!

  • I too had the same vertical white line in the centre of the screen last night after having my iPhone 5 up and running for 10 days. I managed to turn it off by holding the buttons in and it came up with the iTunes screen....2 hours later it came good?

    I was talking outside on my iPhone 5 in a fairly humid environment (The Pilbara in January, 2014) then when the call was finished I hung up (as I was walking back inside to the air-conditioning) this white vertical line appeared in the centre of the screen and wouldn't go away. I couldn't use it NOR could I accept calls. (I called my number from my other phone). I eventually managed to turn it off after removing the protective casing (Otter Box) and then it came up with the white cord / iTunes screen........I left it for a while...it turned back on BUT is still had a flickering screen.......I re-charged it and I have backed it up this morning (at work) on iTunes and it seems to be working 'fine.' All I can say is 'DO NOT GET RID OF YOUR SAMSUNG GALAXY PHONE IF YOU HAVE ONE!' I haven't had an OUNCE of trouble with it and have owned it for at least 3 years. The iPhone has been up and 'running' since the 6th of January, 2014. This happened on the 15th of January, 2014.

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

    I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
    There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
    Any comments or ideas ?
    Thank you in anticipation.

    First backup your users files off the machine to a external storage drive (not TimeMachine!)
    Most commonly used backup methods
    Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
    Disk Utility is under the Utilities menu on the second screen.
    Step by Step to fix your Mac
    If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

  • My iMessage no longer works with the new is07 update how do I fix this

    My iMessage and some of my applications no longer work with the new software update. How do I fix this?

    I called Apple Support after trying many fixes suggested online. They directed me to the procedure on the following page:
    http://support.apple.com/kb/TS4268?viewlocale=en_US
    I did the erase and restore option they suggested since I had tried a pile of ther things suggested on posts and blogs and they did not work. I even waited the obligatory 24 hours, thus the restore from backup option was what they suggested. I have a 64gig iPhone 4S and it took about 1.5 hours to complete the entire operation seeing that I am using about 54 gigs of that capacity.
    Warning: I lost all of my emails and all of the data files from one of my map programs so be sure you have everything that you really need from your phone store elsewhere before wiping your phone. I thought that the backup on my computer would restore everything but obviously NOT.
    Hope this helps.

Maybe you are looking for

  • IPOD no longer recognized by iTunes after newest upgrade!!!!

    I just upgraded to the latest version of iTunes. My IPOD is now not recognized by Itunes. I get this message: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software".

  • I'm accruing data usage when I'm connected to wifi

    I'm positive that Verizon is committing Fraud. 10 days ago my husband and I switched from Sprint to Verizon and got new Galaxy S5 phones.  While with Sprint, my husband used about 1.5GB of data a month and I used .5GB a month.  The reason my usage wa

  • Custom.pll and custom.plx location changed

    Hi Friends, I am having Oracle Apps 11.5.9 and i had the custom.pll and custom.plx on $AU_TOP/resource and make the changes there and it's working fine. Now suddenly the changes made on the file is not refelecting so i searchd the server and i could

  • Sending binary data over RS232 without conversion to ascii

    I need to send binary data to a PIC without the data being converted to ascii. With the VISA vi's, when I want to send 11111111, it gets converted to a string "255", and is sent as "2","5","5" in ascii. How can I send it as one byte?

  • Why does my memory max out at 70% (using iStat) @ 2x1GB RAM 667mhz

    Hi, I'm using iStat as a monitoring service and I have 2x1gb RAM installed and a 2.4 core2duo processor. I run multiple programs at once (Firefox, Dropbox, MS Office, iTunes) and my memory hovers around 71% all the time (it gets sluggish around 70%).