HT4623 issues with texting after the 6.1 update on my iPhone

issues with texting after the 6.1 update on my iPhone

My wife and I are on different networks ie GCI vs AT&T after we both updated our iphones to 6.1 we no longer can receive texts messaging even though both are phones say the message was delivered. we can however text with other iphone users as long they are withing the same carrier and with everyone as long as they are not other iphones regardless of the carrier as well as with other iphon users that are still using 6.0. My wife and I also have ipads with wifi only and the one we updated to 6.1 is having the same issue while the one that is still 6.0 has no issue and will send and receive messages with out issue even to and from the 6.1 devives that are having issues. I have contacted both service providers and was told it is a Apple messaging issue. At this point I just would like to find and reinstal the 6.

Similar Messages

Is anyone else having issues with texting after the iOS8, with a iPhone 4s?

The messages app on my iPhone is not responding. I click on the message button and i get a white screen for 30 seconds and then goes back to the home screen.

Hello, cliffiapp4.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing this issue.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

Is anyone else having issues with airplay after the Lion update?

Is anyone else having issues with airplay after the Lion update? It sees the libaray but won't connect...

I'm having the same issue. So far all lion has done for me is make all my microsoft office documents un-readable until I upgrade (about $150) and lose my home share capabilities...can anyone assist with this?

After the last ios7 update on my iphone 4, only 1/4 of my 1800 songs play now???? play??? ***

After the last Ios7 update on my iphone 4 , only 1/4 of my 1800 songs will play now???? The songs skip through til it decides to pick one to play?? I LOVE my iphone but i will not be held hostage by it! I cant sync as most of that music was lost when my hard drive failed for the 3rd time on my macbook Is there any other option for me than syncing??

Did you get this resolved yet? Mine disappeared yesterday. One of the guys at work found it in a folder I created with some other items. I hope this helps. If not you can still find your camera roll by clicking on your camera, click the button on bottom left, then you will see camera roll at top left. I hope this helps.

HT4623 i can not find the botton SOFTWARE UPDATE on my Iphone 3G

i can not find the botton SOFTWARE UPDATE on my Iphone 3G,
I can t use whatsUp anymore because I need to update the system

If you can upgrade you will have to do it through iTunes:
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Has anyone had issues with texting after doing the update today?

I did the update today and not I am having problems sending and receiving text messages. Has anyone else had this problem?

It was with my imessage. I finally got a hold of someone from Apple Support and she had me log out of my Apple ID login and log back in and that seemed to fix the issue. Something about the update messed it up but luckily there was an easy fix.

BW 3.5, BEx Query designer issue with text of the characteristics

Hi All,
We are currently using BEx 3.5 Query Designer to design the queries. We have one of the ODS on which we are querying for.
We have 3 different types of Customer in this ODS. 0Customer, 0BBP_CUSTOMER and 0GN_CUSTOMER. The problem is when we open this ODS in Query designer we see their text name on the left hand side column where it shows data fields as the same text name Customer.
Now the our Power users have raised the issue that it is very confusing even when there are 3 different technical names for these characteristics.
2 Questions I have.
1) Why is something like this happening? is it some issue with the Patch or something. We will be migrating to new BI soon but in the mean time if I could resolve it that will be the best. Or does it even get resolved with new BI???
2) what is the way in which we can resolve it?
Thanks in advance and points will be given generously.

HI BI Consul!
Things like this happen, when it is called customer it could be different customers, 0customer is the standard R/3 customer and 0BBP_customer is objects from CRM and most likely 0GN_Customer might be customer from different system.
Sure, power users should be told which customer is customer and you could also change the discription of the object, to match the definition on the other system. You could also just create z object and replace the existing confusing object with something meaningful to users.
thanks.
Wond

I need help with problems after the April 2015 update

In December 2015 I purchased an LG G3. It started out great. Then often people couldn't hear me..sometimes with the speaker on, sometimes with it off, sometimes on bluetooth with my car,.or my voice faded in and out, or sounded muffled or garbled. After over a month of these frequent audio problems and several calls to Verizon during which they boosted my signal and guided me through a factory reset which took all of my photos out of their albums, the final suggestion a few days ago (April 21, 2015) was to download the new software update. I did and I'm not happy with some of the changes e.g. I wish I could have the old home touch buttons back,The jury is still out on sounds quality, but now I have two new annoying problems.
The first is that my car and phone used to bluetooth (connect) as soon as I put my engine on. Now, every time I get in my car I have to go into settings and give the phone permission to have other devices find my phone. Then after one or two tries the bluetooth eventually connects them. I am a Realtor and I need my phone and car to connect automatically every time I get in. I can give the phone permission to connect for up to an hour, but then it goes off. How do I get the opton to stay on?
The second is that I often turn my data off, and I used to do it from the notification panel that I can pull down. I just pulled it down and tapped "data" and the light would go off if the data was off and on if it was on. Now when I tap "data" I can turn it on or off, but the data button stays lit so when the data is off the light is still on. No more quickly glancing to see the data status...I have to tap it and read the notice to find out. Yes, 3G or 4G light up in tiny letters at the top, but data is the only button that stays lit when it is turned off.
Am I missing the steps that would fix these issues?

SiBIMe,
I am sorry to hear of the issues with your device before and after the update. We want to restore the love back to your device. Please keep us posted on the audio issues to see if the update did assist with that issues.
In regards to the two new problems, we want to make sure we get this worked out. Do you have issues with the device only auto connecting to your car or all bluetooths? Do you receive and error message when the device doesn't auto connect and you attempt to connect manually but it fails? As for the data icon, when you tab on the data icon from the notification tab does the 4G actually disappear even thought the data icon is still lit?
Please test your device in Safe mode and let us know if you still experience the same issues. Here is how to place the device in safe mode. http://vz.to/1owbN8K
LindseyT_VZW
Follow us on Twitter @VZWSupport

I suspect I have issues with Rosetta, after 10.9.10 update

Hi,
Lately i havent been to use some software with rosetta, including scanner software, sketchbook pro. and today, i was trying to install my copy of photoshop 7.01 but it doesnt even start. the issues are all the same: the icon bounces onc or twice and then crashes without any notification.
Can anyone give me support, probably with the use of the console? thank you.
Im using 10.4.10

How does 10.5.3 affect the Wireless on your iPhone?

Battery issue in q10 after the latest software update 10.2.1.2102

Hi after i updated the latest software the first issue i had was this error msg "www.bberror.com/bb10-0015" and obviously couldnt switch on my phone, i immediately ran to the service centre and they got it fixed...
But after a few hours my phone started behaving strange,
1> It heats up like crazy without using it at all and
2> My battery drains out within a few minutes without even using it and then again i get to see the same error message "www.bberror.com/bb10-0015"
But when i put my phone on charge after a few seconds it gets switched on, and the battery level shows 0%... Have tried charging it to full 100% and then removing it from the charger but again same result... Have to keep it connected to the charger whole time now, but still my phone gets switched off on its own again and again... Helppppppppppppp

It is possible... and the easiest way to determine if it is, is to get a new battery and find out.
if it the error continues, then we will move to the next troubleshooting step.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issue with 3G after iOS 6.1 update

After updating to the ios 6.1, my iphone automatically switches from 3G to EDGE and stays that way till I manually re-register on the network. Is there any fix for this?

As per your query i can suggest you the following-
1) Add the AirTunes service to the list of services available for mDNS snooping. To do this go to Controller-->mDNS--->general and select AirTunes from the dropdown.
Flexconnect (previously known as HREAP) does fix the bonjour mdns for remote branch offices and other vlan's where you want bonjour to be running.
You only have to flexconnect the wired and wireless WLAN SSID where you need it as the rest of the SSID's can be centrally switched WLAN"s and they work quite nicely.
2) Add the AirTunes service to the appropriate mDNS profiles in your controller, in my case I just use the default profile. To do this go to Controller-->mDNS--->Profiles and add the Airtunes service to each profile you may have configured
The problem with AirPlay is that it depends exclusively on multicast DNS (shortened as mDNS) with DNS service discovery (DNS-SD) to operate. mDNS is a zero configuration protocol that relies on link-local multicast messages on the local LAN to publish DNS records without the need for a centralized DNS server. DNS-SD is a protocol that compliments mDNS and provides service discovery, too. Apple's implementation of mDNS/DNS-SD is called Bonjour.
Aerohive indicates that these Bonjour gateways can also filter mDNS messages, which sounds somewhat useful

Has anyone had problems with email after the IOS 5 update

I updated my phone to the IOS5 on Thursday and can't get emails from my yahoo account. i have deleted the email account from my phone and the added it back to start over and nothing. I am completly lost as to how to solve this problem, but I want m email back. Has anyone else had this problem.

I am having the same experience. I just update this morning and now can't get mail. Did you ever figure this out?

I am experiencing delayed typing with texting after upgrading to IOS 7 - anyone seeing this?

Both my wife and I are experiencing delayed "typing" with texting after the upgrade to IOS7. Concisely, you can keep typing, but there is a noticable delay before the text appears in the message section. I have also noticed delays with entering my 4 digit Passcode.

Mine was so bad that it was nearly impossible to type in my passcode. I finally restored the phone (reinstalled the software) and then restored from backup. All is working fine now. This is on my iPhone4. The real trick was getting past the passcode and then turning off Find my iPhone (which is required to restore) when it was nearly impossible to type my password in.
It solved my problem. After I did it I read somewhere here to try resetting all settings. That would be quicker but you may lose some settings you had. In any case restoring completely solved my problem.
My iPad did not experience any of these problems.

Having issue with texting my contacts after 4.1 update...HELP!!!!!

Everything was fine with my phone, but after the 4.1 update, i began to have issues...I go to my contacts, select Brian, text him, then immediately or later on in the day (does not matter) i want to text Nicole..i go to contacts, select Nicole, but Brian shows up..then if i select another contact like Debi, Brian shows up..it follows this pattern..i was on the phone with apple doing everything possible, they finally came to the conclusion, i had a defective device, so i go to the apple store, i get a brand new replacement, all checks out fine..i get home set it up, re do the update, all still is great, but now its back to the same contact texting sequence..so its not my device..i was on the phone with apple again today, and luckily i get a tech who had an iphone 4 with the exact identical issue, he told me he was going to contact the team so they could be made aware of this..hopefully a fix will be out soon

I too have noticed this but mine is happening on my new iphone 4 that came with the 4.1 software on it. Has anyone responded to this issue for you? I would like to see a fix for this.
Another thing I noticed that I think is related to this problem is sometimes when I select a name from my contacts on the phone then select text message and then the number or email to text to, the screen will switch to the text message mode without a receipient and I have to re-select the person I want to text from the message all over again.

HT4972 Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

I think a few have.
Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

HT4623 issues with texting after the 6.1 update on my iPhone

Similar Messages

Maybe you are looking for