HT4623 Keep getting error message when trying to update to ios6
Every time I try to update my 4s or iPad 3 to ios6 I get an error MSG
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Similar Messages
-
HT201210 keep getting error message when trying to update iOS to 5.1.1
I have had no trouble updating the several iPads under my charge at work, however can't update my own. Am using iOS 5.1 currently on original iPad. I go to settings and it looks for any updates available and I click install to 5.1.1 but keep getting error message saying there was an error when trying to update. I am on my home wifi on my iPad. Have done same procedure with about 5 other iPads with no trouble. What can I do?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
Why do I keep getting error message when trying to update iPad with ios7?
Keep getting error message ios7 won't validate? Can I reset iPad and download again? Will I lose data on iPad if reset?
NMAYO,
In your project view can you right click on the chassis in the cRIO and make sure that it is set for Scan Mode and not FPGA mode? Also, In the measurement and automation explorer you can check the cRIO and verify that it has Scan Engine Support installed on it. The tutorial below shows how to reformat a cRIO and install software on it, the later steps on software will allow you to check your cRIO.
Reformatting a CompactRIO Real-Time Embedded Controller
Ben Sisney
FlexRIO V&V Engineer
National Instruments -
Keep getting error message when trying to sign in to make a Genius Bar Reservation
Keep getting error message when trying to sign in to make a Genius Bar Reservation
Make the reservation by phone.
-
i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?
i have done that
same result
the phone has a sim in it that is not active. does this cause the fault in question? -
I keep getting Error 17 when trying to update to 7.0.4 iPad Air
I keep getting Error 17 when trying to update to 7.0.4 and the Ipad stays in USB Mode
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Message was edited by: Texas Mac Man -
HT201210 keep getting error 3194 when trying to update ,what is this
keep getting error 3194 when trying to update,what is this
error code 3194 http://support.apple.com/kb/TS3694 Do you have the lastest version of iTunes? if not update.
-
I keep getting error messages when I try to activate iMessage on my iPad since installing iOS7. Anyone else having this issue or a solution. I can obviously sign in with the same Apple ID information/password as I have done here and I am connecting with Wifi now and in all other apps.
After looking at some other posts I signed into iTunes and edited my password with my Mac. Then I powered off and restarted my iPad and all is good now.
-
Keep getting error 4002 when trying to update Genius
I haven't seen anyone write about getting error 4002 when trying to update genius in itunes. I select update genius and it gathers information and sends it to the itunes store I assume. And then waits a few seconds and then I get the following message "Genius results can't be updated right now. An unknown error occurred (4002) Please try again later." I've been getting this message for well over a month and I keep hoping they'll be an update or somehow it will magically be fixed, but nothing has changed. Anyone have any insight on this one?
The current ituned library it 123GB and is stored on external drives. It should also be noted that when I first turned on genius when it was released it went through this whole problem without a hitch. I just can't update Genius with any of the music I've added since then. I can't even get genius to recognize music that I got from the itunes store since I've had the problem.Be careful - this was a disaster for me. Once I did this, I got a different error - an error 4010 and in trying to recover, caused a lot of library issues that forced me to go to a backup to fix. You'll find a lot of people having the 4010 problem. Basically iTunes Genius is a disaster and Apple isn't fixing it.
-
HT6147 Keep getting error message when trying to download iOS 7.0.6 to my iPhone 4s
Unable to download SSL iOS 7.0.6 update. Keep getting error message.
Hey Pster,
Thanks for the question. I understand that you are experiencing issues updating your device. The following resource may provide a solution:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
Thanks,
Matt M. -
I keep getting error message when trying to convert a pdf to a word doc
I keep getting an error message when ttying to convert pdf to word.
Full details, please. How are you trying to convert it? What does the error message say?
-
Keep getting error message when trying to connect
First, I am severly hearing impaired and telephone support is not an option.
I went from an iMac G5 to an iMac 3.4 GHz Intel Core i7. Contribute had been working perfectly with the old iMac. Now whenever I try to connect I get the following error message: "Access Denied. The file may not exist, or there could be a permission problem." When I go through the trouble shooting file I keep getting the error message while trying to re-configure. Can someone please help??What is the version of Contribute and also the Mac OS ?
Can you try clearing the Preferences this would be like launching Contribute freshly? -
Keep getting error message when trying to eject iPOD nano
When trying to eject iPOD, getting error message ..."cannot be ejected because it contains files that are in use by another application". No other application is open but iTUNES. What does this mean? and are there any tricks to get it to eject?
Usually this is caused when antivirus "Grabs" the drive to scan it in the background, and/or windows itself "Grabs" the drive for indexing and things. It also happens if you play a song off the ipod thru iTUnes, then stop it.
Usually rebooting will force it to let go -
Keep Getting Error Message When Trying to Upgrade
I have tried to upgrade several times it goes all the way through and then it gives an error message after trying to upgrade quicktime error message 2378
+error message 2378+
That typically indicates a problem with your VBScript. See the following troubleshooting article:
iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)
(The Vista instructions are down at the bottom of the document.) -
Keep Getting this message when trying to update library.
"Only one library can be matched at a time. If you continue, the other iTunes Match session will be stopped and this computer's library will be matched instead"
I've only got one computer.
anyone else having this issue?
Advise?
Thanks.Hi,
You can get this message when the match process has been interrupted. It still thinks that you are trying to update match. As you only have one computer, you can safely select match this computer.
Jim
Maybe you are looking for
-
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or pa
-
Someone please help me connect my two devices together so that I don't have to purchase yet another item. Is there an app or something that would allow me to connect my Mac Mini to my iPad 2 wirelessly. I can't get passed the password screen because
-
Workflow for Material Master and Vendor Master Creation
Hi Has anyone mapped creation of Material Master & Vendor Master through SAP Workflow. Seek your valuable inputs. Best Regards --Vikas
-
RFC lookup to PI system or other ERP system.Which is better?
Hello experts, I have a scenario[RFC>PI(RFCLOOKUP,SOAP LOOKUP)->SOAP] where I have to fetch or update the data in the table using RFC lookup in the mapping. To store or update the data ,I have created a table in PI system and through RFC LOOKUP I
-
I need to drive stimulus-response with a software driven digital trigger and NI-TIO counter based response. No analog I/O is really relevant, although I have a PCI-6035E multi-function DAQ as part of my gear. I intend to use the analog, but its timin