HT4623 my device no longer accepts the creation of any account

my device no longer accepts the creation of any account

Thanks for that. There was some code in the GET_P method which I had unremarked. I assume it was always remarked out because once I Unremarked it again all worked okay. I did not really look at the code but when I did I could see that it was being set to a Pickllist, which was not what I wanted.
Many thanks
Jason

Similar Messages

  • TS4425 hmmm. I haven't got that notificaton. I use an Iphone 4 and a 2' gen IPad, but non of the devices let me accept the conditions. So I can't ude photsream on my apple tv2 gen.

    I've got a problem to use Photo Steram on my Apple TV, because Icloud said that someting had change. I would have to accept the terms, I haven't got that notificaton. I use an Iphone 4 and a 2' gen IPad, but non of the devices let me accept the conditions. So I can't ude photsream on my apple tv2 gen

    I've got a problem to use Photo Steram on my Apple TV, because Icloud said that someting had change. I would have to accept the terms, I haven't got that notificaton. I use an Iphone 4 and a 2' gen IPad, but non of the devices let me accept the conditions. So I can't ude photsream on my apple tv2 gen

  • HT5552 im living in australia and got a debit master card. with this im usually able to make online purchases. it doesnt accept the card in my account settings though. it sais payment method is declined. sureley this cant be right.

    im living in australia and got a debit master card. with this im usually able to make online purchases.
    it doesnt accept the card in my account settings though. it sais payment method is declined. sureley this cant be right.
    i dont want to get an credit card.

    im living in australia and got a debit master card. with this im usually able to make online purchases.
    it doesnt accept the card in my account settings though. it sais payment method is declined. sureley this cant be right.
    i dont want to get an credit card.

  • How long lasts the unicity (if any) of the System.identityHashCode()?

    How long lasts the unicity (if any) of the System.identityHashCode()?
    I created code that keep track of seen identityhashcodes for instances
    created and unreferenced in a loop.
    **** I was surprised to see that these identityhashcode can be reused! ****
    The language spec says noting about the unicity of those (at any given time) and especially not for periods of tiem.
    Spec menyions that most jvm would use the heap address (which would explain why these identityhashcode could be reused)
    **** The question is:
    At what time is an identityhashcode invalidated and reusable?
    If I have a finalize() method, at which time the object is considered unreferenced, could its identityhashcode be reused while the finalize() is running?
    My problem is that I associated data to an object, in an external diskcache, by a key whose value is the identityhashcode, (trying to make the key unique), and I must garbage collect it.

    Casually? yeah right, 64bit platforms are just a minor
    detail.... ;-)
    I wasn't clear about my hopes. I just hoped that for
    reflecting new architectures, they would had a new
    method
    like System.getUniqueObjectID(Object):long
    Basically, if sun does not add that, it means that
    they beleive the java programmers do not have a need
    for addressing/keying object instances uniquely, and
    we should just do for-loops with "=="....
    I will post an RFE to sun, we'll see.
    Thanks.It is not required that hashCode every return a value larger then an int. There is no requirement that
    two different objects return two different hashCodes. There is only the requirement that if two objects are
    the same then they return the same hashcode. Most 32 bit JVM's do not produce a unique hashCode value
    for all objects. Because of this there is also no need for 64 bit JVM's to return unique hashcodes. Hence
    64 bit JVM's do not need more then an int to represent the hashCode.
    The equals() method (or ==) is used to determine whether two objects are equal. Not the hashCode.
    Increasing the size of hashCode to a long would break a large number of classes in the JDK all of which
    expect an int. HashMap/hashTable/HashSet are the prime users of hashCode. They do not require a value
    larger then int as they use the value to index into an array. Arrays cannot be larger then 2^31 elements
    long. This also will not change on 64 bit JVM's as changing this limitation would break most of the API's.
    matfud

  • I have just got iTunes match. It appears that since joining and starting it some tunes have been deleted from my library. They are shown in the listing but iTunes can no longer locate the files. Any suggestions?

    I have just got iTunes match. It appears that since joining and starting it some tunes have been deleted from my library. They are shown in the listing but iTunes can no longer locate the files. Any suggestions?

    If they are showing in the Videos app with a cloud then go into Settings > iTunes & App Store on your phone and set Videos (under the 'Show All') heading 'off' - you might (depending upon which country that you arein) have a similar button for music and the Music app.

  • I forgot the password for any account My Cloud

    I forgot the password for any account My Cloud

    Go to http://iforgot.apple.com and sign in with your iCloud login. A new password will be sent to your associated email address. If this doesn't work you will have to contact Support. Go to https://getsupport.apple.com ; click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.

  • Remote device will not accept the connection

    Oh Windows 8...
    I've been having computer issues for a while now, but I always figured it was the application I was using to access the internet. I first noticed an issue when trying to log into World of Warcraft. There was an obvious connection issue, but I could still
    connect to my account. I contacted Blizzard about it, and nothing they told me to do helped me. This has been going on for nearly a month. Today, after not playing for a couple days, I realized I couldn't access the game at all. I blamed Blizzard again, and
    became frustrated with them because none of their solutions ever helped me.
    Today, instead of playing WoW, I tried to play Sims 4, which requires you to launch Origin, an application that uses the internet. Origin wouldn't let me connect either. A similar error to the one I experienced with World of Warcraft and its starter program
    (BattleNet) appeared. Again, I blamed the provider of the application.
    Still bored, I tried launching Steam, yet another gaming application that requires internet use. No, yet again I received a similar error to the other two. By now I figured it was an issue with the computer itself. I launched a connection test and it told
    me that the "Remote device or resource will not accept the connection".
    I tried launching Internet Explorer. I got the message that the "proxy server is not responding". I'm beyond frustrated. Thank god I also have Firefox installed, so here I am.
    I looked up possible solutions to my issue. All the possible solutions I've found are only about Internet Explorer, and none of those solutions have helped anyone else with my issue.
    So I guess it's on your end here. I have no use for this computer at all at this point. Help me out, please. I just recently bought this computer and I don't want to have to purchase another one to get away from Windows/Microsoft.

    Hi,
    This issue can be caused by proxy settings or malware.
    I suggest you to disable proxy settings. Follow these steps:
    Under "Tools" in the browser tool bar select "Internet Options".
    In the "Internet Options" window that pops up, click the "Connections" tab at the top.
    Click "LAN Settings" near the bottom of the "Connections" section.
    If the "Proxy server" checkbox is marked with a check, click it to deselect/uncheck it.
    Click "Ok" to close the "Local Area Network (LAN) Settings" window.
    Click "Ok" to close the "Internet Options" window.
    Now check if you are able to connect to Internet Explorer.
    You can download and run the Windows Malicious Removal Tool from the below mentioned link and run it on your computer:
    http://www.microsoft.com/security/pc-security/malware-removal.aspx
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • TS1398 I have been having network problems on my Ipad and I reset all network settings as advised in the article about problems connecting to networks.  Now my Ipad will not allow me to sign onto any network....it will not accept the passwords for any net

    My ipad has been a little glitchy for the last couple of weeks....not able to load pages because of DNS lookup failure and really slow loading...some of which has to do with the DSL service I have, but I followed the directions on one of the Apple wi-fi issues pages to reset network all connections..which I did, and now the Ipad cannot connect to WiFi because it will not accept (or cannot resolve..or??) password.  I am sure I am typing the password correctly and have tried it on several routers..and it cannot cannect to any router properly even with the correct password.  My laptop is connected just fine and it accepts the password and I have confirmed the password with the ISP and tried other routers.
      So the question is what should I do if I am entering the right password and the Ipad can't sign itself on to the Wifi network?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Lightroom 4 can no longer see the pictures on any of my SD cards, why is this?

    Hi all,
    Lightroom 4 can no longer see the pictures on my SD card when I insert it into my computer. The photos are definately on there, when I right click and press 'show in finder' they are all right there, yet Lightroom can't see them - it show '0 Photos' on the memory card tab .
    I played around moving pictures from sub folders on the SD card to the first level (which didn't make a difference), and checked read/write permissions (which all seem fine).
    Gear:
    -IMac, OS X v10.7.5, Intel Core i5.
    -Nikon D5000
    -Mix of SanDisk and PNY Professional memory cards (all have pictures on and Lightroom cant see any!)
    Thanks in advance for any help. This is driving me nuts!
    Jason

    Hi all. After struggling with this for a while I changed the name of the memory card in finder - this seemed to do the trick though I have no idea why! Any thoughts?
    Jason

  • I downloaded the latest Firefox security update and my computer will no longer access the internet in any fashion, despite the fact that I'm still connected to the internet. Other browsers no longer work either.

    Immediately after I downloaded the latest firefox security update my computer will no longer access the internet. I still have a fine wireless connection but Firefox, Internet Explorer, Itunes, and every other program will no longer access the internet, saying there is a connection error. I even tried restoring my system to a previous date but it said that a security program was preventing it from doing so.

    What's the security program called? Is it '''Win 7 Security''' by any chance? There's a rogue AV app that will prevent internet access by that name. It comes in many different flavours, but it's basically the same product with different names depending on the operating system its aimed at. See screenshot.
    Do you have another computer you can use to download Malwarebytes? Or can you get a friend to download it for you and copy it to a USB drive? Download from here: http://www.malwarebytes.org/products/malwarebytes_free
    You can use the USB drive to transfer the program to your own PC and then install it.

  • HT4623 My iPad no longer has the iTunes app nor the App Store app. It will no longer delete or download. Anyone ever experience this. Geek squad had no advice for me.

    MY iPad no longer has an App Store app nor an iTunes Store. I cannot delete nor download. I have tried everything but a reset. Do not know which one I should do. My info is backed up and stored in the cloud , HELP!! Sleepless on South Carolina

    Check to see if restrictions are enabled.  Settings / General / Restrictions.  If they are, you will need to enter the 4 digit code that was set when restrictions were turned on.  Then check to see if App store and iTunes are disabled as a restriction.  
    If that is not the case, or if you have forgotten or do not know the passcode for restrictions, you will need to try:
    1.  Reset homescreen layout - see if they come back.
    2.  Restore to Factory settings - Try restoring from a backup afterwards.  If the problem still exists, restore and set up as new.

  • How do I unsynch devices ( iphones, ipads) under the same apple ID account?

    After the software update I started receiving my husband's text message.

    You can use separate AppleIDs for iCloud, iMessage and iTunes - you just need to create unique AppleIDs for the iCloud accounts if syncing contacts that way (you will need an email address that is not already registered as an AppleID though to get another AppleID).
    Apps are a different matter in that purchases are tied to the AppleID used to log in to the store to make the purchase.  So you can create another AppleID for iTunes as well and use different ones on the different phones, but any apps you have already purchased with your existing AppleID are permanently tied to that AppleID.
    Really, unless you are sharing apps, content and such, there is no reason to use the same AppleID on each anyway.  So the simplest solution is to create new AppleID(s) for the second device.  If you need an email address to do that, just get a gmail account (or hotmail, yahoo or any other free email account).

  • Kid Art for iPad app:  no longer plays the music.  Any suggestions?

    Kid Art for iPad app:  no longer has sound?  It used to play a jingle on the home page and make sounds when coping objects into the drawing pad.  Any suggestions please.  I have uninstalled and reinstalled it but no change.  I have repurchased it on my iPhone and it works correctly but I don't seem to be able to repurchase it on the iPad - it reverts to the original purchase which seems to be faulty.  Help?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • Automating the creation of telephone accounts in call manager

    Hi, I have recently been asked to explore the possibility of automating telephone account creation in Cisco Call Manager, using scripting.  Now although my scripting knowledge isn't great, one idea that was suggested was the use of .csv files?  Any advice or tips about how to proceed would be very much appreciated. Thanks.

    Hi Jaime, thanks for your reply.  I have already discussed the possibility of using CUCM 10 although unfortunately this was ruled out straight away as the cost of implementing the latest version would be too expensive for our department.  I am also looking into the Cisco BAT and have an account for the CBT Nuggets to get some training on BAT.  Additionally, I am looking into writing up a simple script that could be used to change the formatting of a .csv file containing staff details that could then be uploaded to CUCM.

  • I no longer see the URL of any website so can't copy and past URLs into any emails, etc. Is there some setting to make URLs visible? when I updated, the URLs disappeared. I'm on a MacBook.

    When I updated to the latest version of Firefox, the URLs disappeared so they are no longer visible at the top of the Firefox page. I can enter sites, but I can't copy and past the URLs anymore. Why can't I see the http://... info anymore? Is there some setting I changed or what might be the problem?
    thanks.
    TVDoc

    Try this:
    Click on the orange Firefox tab > Highlight Options > click Navigation Toolbar.

Maybe you are looking for