HT4623 My gyro on the screen is not working....I need help on what to do....it really suck with out it
MY gyro is not working at all...it really suck with out it
Is your screen orientation locked?
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Similar Messages
-
I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?
You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.
-
i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?
Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/ -
The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
So I just ordered my first Mac book Pro. I took it out of the box and hit the power button to do the start up and the screen will not work at all. I shut the computer off and back on again. I plugged it in and unplugged it. I've done everything I can think of and the screen still stays blank with no life at all
Is the battery charged? Press the little button on the left edge, near the front. If no green dots, no charge.
Does it charge? When you connect the MagSafe charger, does the pilot light on the plug light up?
Does it actually start? Should sound a chime after you press the power button on the top/right corner. If it chimes, does the Caps Lock pilot light when you press it?
If it starts and Caps Lock does flash on and off, have you tried pressing the screen brightness control for awhile? F2 turns up the brightness, may be turned fully down. -
I am using iphone3g and upper portion of the screen is not working.
I am using iphone3g 16GB and upper portion of the screen is not working and somebody suggest to get a new phone, should i get a replacemet to the old one..? i purchased on 2008
Thanks for the response Templeton Peck,
New phone...! means the phone will get the replacement or I have to purchase a new one...?
or if I change the touch pad or the touch screen will it not fix the issue...? -
I cannot open my phone as the screen will not work. I have made an appointment with a technician tomorrow but is there anyway of backing my phone up to Icloud so that I do not lose any of photos etc etc?
PLug it into yrou computer to sync/back it up.
Is it set to back up to iCloud now?
Or do you have wifi backup enabled in iTunes?
Plug it in while on wifi and it will automatically back up. -
My screen just went blank and is still on but the screen is not working what shall i do?
my screen just went blank and is still on but the screen is not working what shall i do?
Have you tried turning off the phone and then turning it on again?
-
my iPod touch fell on tile today and was cracked and even worse now half of the screen will not work! :''''( What can I do?
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 or the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
my phone was not working only the restore button was available so i restored it and they told me i have to update my iphone 5s as well. i waited till the end the update software was downloaded successfully but then the iphone restarted by itself and now its not working. the iphone screen is shown the picture when you first time open the phone to connect it to an itunes. i connected it by it not working, i restart everything still not working:( i need help asap please. thankyou
it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.
-
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
-
Hi everyone,
I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
(PORT THAT WORKS)
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c2d
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfa
FaceTime HD Camera (Built-in):
Product ID: 0x8509
Vendor ID: 0x05ac (Apple Inc.)
Version: 5.16
Serial Number: DJHBAJ06VRDH7FL0
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa200000 / 3
Current Available (mA): 500
Current Required (mA): 500
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfa100000 / 2
Current Available (mA): 500
Current Required (mA): 2
Microsoft® Nano Transceiver v2.0:
Product ID: 0x0745
Vendor ID: 0x045e (Microsoft Corporation)
Version: 6.34
Speed: Up to 12 Mb/sec
Manufacturer: Microsoft
Location ID: 0xfa130000 / 6
Current Available (mA): 500
Current Required (mA): 100
Apple Internal Keyboard / Trackpad:
Product ID: 0x0252
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.18
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa120000 / 5
Current Available (mA): 500
Current Required (mA): 40
BRCM2070 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa110000 / 4
Current Available (mA): 500
Current Required (mA): 94
Bluetooth USB Host Controller:
Product ID: 0x821a
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.42
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa113000 / 8
Current Available (mA): 500
Current Required (mA): 0
(PORT THAT DOESN'T WORK)
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c26
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfd100000 / 2
Current Available (mA): 500
Current Required (mA): 2
IR Receiver:
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0xfd110000 / 3
Current Available (mA): 500
Current Required (mA): 100I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote. -
what should i do please someone help me, I live in UK so how much will it cost to get a screen replacement or will they just replace my phone? but its just my screen so yeah please help. its in a bag of rice and it works fine only the screen is not doing anything and when i press on the screen i see like a white ish blob. will my phone die out or will it just be normal but the screen not functioning
The damage has been done then
Take it to Apple and pay for a replacement
Here in the States a replacement cost $229
Allan -
Touching the screen is not working
The screen does not respond. Cannot select prosuct. It is an I5S
If screen is frozen and it is not responding to touch, hold the power button & home button together for about 8-10 seconds until you get an Apple logo on the screen and let go. Likely that an App in the background has crashed.
Maybe you are looking for
-
Despite checking 'save and quit' before exit, I lose all tabs upon re-launch.
This kind of thing keeps me from making Firefox my default browser. This never happens with Chrome.
-
Sleep or Shut Down? 4 hours a day usage.
What is easier on the hardware and system- shutting down or sleep mode? I use my imac about 4 hours every day.
-
Tor can't reach local HTTP proxy after Polipo
I'm clueless about this. I've installed Tor and Polipo, configuring them both as ArchWiki says. The message Torbutton gives me is the next: Tor proxy test: Local HTTP Proxy is unreachable. Is Polipo running properly? I'm thought that it may be some p
-
Unicode/glyph/font advice needed for porting WinForms app to Macintosh using AIR
I've written an application in WinForms/.NET that I'd like to port to the Macintosh platform. I have never developed for the Mac but it seems as though AIR might be a good choice. I'm totally new to AIR. Some advice and info would be much appreciated
-
Hello friends, If i delete the data from ODS whether the init delta will be affected? futher delta will happen regularly or again we need to make the init?? Thanks Ram