HT4623 my i pad screen is blurred what will i do to resolve it? thanks so much.
hello! i would like to ask help about my I pad screen is so blurred how can i fix it? thanks.
Have you tried resetting your iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Similar Messages
-
how to trobleshoot an ipod touch. yesterday i tried to reset the setting then after i click reset it suddenly shut and after a few minutes an apple logo came out. It cannot be open anymore until now and the logo is still their. what will i do.please help me thank u
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My new I pad screen is yellow , what do I do now . Help
Please help what do I do when the new I pad screen turns yellow .
This appears to be a common problem with the iPad 3. Mine has the same frustrating problem too. Check here:
https://discussions.apple.com/thread/3810949?start=0&tstart=0
https://discussions.apple.com/thread/3810544?start=0&tstart=0 -
hi,i wanna restore my iphone3g but some error 1015 occured,what will i do,pls help me...thank u!
Per Terms of Service to which you agreed when you joined
this forum, discussion of jailbroken iPhones is prohibited.
Google may provide some assistance, but it is just as likely
that the jailbreak has permanently damaged your iPhone. -
HT4623 my i pad disabled after update what can i do
help my i pad has disabled after updating and will not accept my passcode and will not sync with i tunes as i tunes wants the passcode which it will not accept
Forgot password or device disabled
http://support.apple.com/kb/ht1212 -
I have purchased an app from the store used it for a few days , now it won't open properly .its just a black screen with a circle in bottom right corner with a 1x in it . Anyone know how I can re open this please as I need this app urgent thanks
From the home screen, double click the home button to bring up the Recently used App list. Find the App with the problem and hold your finger on it untl the Apps start to shake. When that happens tap on the (x) on the right side corner of the app to close it.
Tap the home button again to get back to the home screen, and try to open the App again.
If that doesn't work, try resetting the iPad. (there should be no data loss):
Press and Hold the Power and home buttons until the Apple Logo shows up. Ignore any sliders that may appear.
When the iPad turns back on, try opening the App again. -
Need help getting icloud to resume sync between my iphone and PC
iOS: Importing personal photos and videos from iOS devices to your computer
The photo sync is one way - computer to iphone.
You can import pics taken with the iphone to your computer as with any digital camera. -
when i boot my cd to install mac ox a lock logo appers in the screen. help what will i do? macbook pro thanks for the help..
Provide the computer's firmware password and press Enter. If you don't know the password and can't turn firmware password protection off, contact Apple.
(79746) -
What will happen if I reset all setting
What will happen if I reset all settings
Brianah wrote:
What will happen if I reset all settings
Not much. You will have to re-enter your WiFi passwords, and may have to redo some of your Settings. -
my problem started when i connected my iphone5 into mac book and i started restoring data, by that i lost my recent photo's ,i tryed a program but it was recovering the previous photo's not the recent once ... need ur help what to do plz....thank u
Not much you can do. You overwrote your current data with older data when you restored the phone from that backup. Your data's gone.
-
Changing hiring dates or changing cost centers date what will be good?
Hey Experts,
What will be the best solution kindly let me know.
Situation is : I have to hire a person from 01.01.1997 and the cost center create for that person is existed from 01.01.2009.
In this situation should I change the hiring dates of the person or
Should I change the cost centeru2019s starting period?
What will be the consequences in both the cases?
Kindly let me know what will be the best solution.
Thank you.Hi
To change the hire date go through the following link
http://help.sap.com/saphelp_47x200/HELPDATA/EN/48/35d4ad4abf11d18a0f0000e816ae6e/frameset.htm
Changing an Employeeu2019s Entry Date
You can change the employeeu2019s entry date stored in the system after completing the hiring action.
A distinction must be made between the following situations:
The employee has not yet been included in a payroll run:
Read the section Changing an Entry Date Before the First Payroll.
The employee has already been included in a payroll run:
The actual entry date is after the entry date that was incorrectly entered in the system.
Read the section Changing the Employee's Entry Date After the Payroll Run if the Actual Entry Date Comes After the Incorrect Entry Date
The actual entry date is before the entry date that was incorrectly entered into the system
Read the section Changing the Employee's Entry Date After the Payroll Run if the Actual Entry Date is Earlier Before the Incorrect Entry Date
There are different procedures for changing the entry date depending on which of the above cases affects you.
Best of Luck
Edited by: Swapnil1983 on Jan 23, 2010 1:05 PM -
I watch app not installOn iOS 8.1.2 yes I updated my iPad 3 wifi only to iOS 8.1.2 but the iwatch app did notinstall what can I do to resolve this
thanksmarlon j wrote:
I watch app not installOn iOS 8.1.2 yes I updated my iPad 3 wifi only to iOS 8.1.2 but the iwatch app did notinstall what can I do to resolve this
thanks
The Apple Watch app requires iOS 8.2, see the release notes for confirmation…
iOS 8.2
Check the device is running iOS 8.2 not 8.1.2 -
Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing
Hi Ginger611,
Welcome to the Apple Support Community!
It sounds like you are trying to mirror your iPad to your TV using an Apple TV but don’t see the mirroring option. Please use the attached article for information on setting up AirPlay Mirroring.
iOS: Use AirPlay Mirroring
Cheers,
Joe -
My I-Pad screen is black!! I tried to sync and restore I-Pad, it showes the contents on the computer and pulling out pictures and other files, but screen is black. I don't know what happened! what can I do?
I have this problem as well...however, resetting/restoring did not take place when I followed the same instructions but got nothing on the screen. Thanks in advance.
-
I have got a problem with my screen... my screen becomes blurred, horizontal streaks. What can i do ?
Hi saigon88,
If you are having issues with the display on your MacBook Pro, you may find the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden
Maybe you are looking for
-
How do i get to see websites on full screen so i dont need to keep scrolling left and right?
before i could see the whole width of a webpage without scrolling left and right but now everything is bigger and i cant see the whole page without scrolling.
-
Hi expert, I am trying to upload Standard Text Key (CA10) for task list. I don't know how to do it, because it contain long text. Can anyone give me a suggestion? Thanks, Secundes
-
Remove an unused map ID - Does Not Work, Documentation Innacurate
I am using TCS 3.5 on Windows XP Pro. We're linking FM books to RH for online help output. I'm listing this in the FM Integration section for that reason, but this seems like it could possibly be a standalone RH problem, too. I've been creating map f
-
Sent myself a vcard from Outlook so I can open it on my I phone. These have always in the past come through as vcf and I have been able to open and save them. Today no matter what I do they are coming through as dat files. Any ideas?
-
IPlanet 6.0 SAX parser fatal error
I am getting the following error, at the start of iPlanet 6.0 web server. The line number 5 is <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd"> in the file web.xml Error mess