HT4623 My iPad doesn't want tot let me update it

It doesn't let me update it I go on the settings general but the update button doesn't show but every time I try to get a new app it tells me I have to update plz help

See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Similar Messages

  • Ipad doesn't want to start (french user)

    Hello
    My ipad doesn't want to start anymore.
    Everything was ok but when i have tried to start it, anything was wrong.
    The screen is dark and when i try to start it, there's only a light.
    I have tried to stay on "start button", but nothing appears.
    I have tried to update through a windows computer but i can't because there is a password on my ipad...
    Sorry for themistakes, but i'm french.
    Anyone can help me?

    i have this message in my computer: "itunes could not connect to the ipad because the ipad is locked with a password. Enter code so that the ipad can be used directly by itunes".
    But my ipad's screen still stay black

  • My friend's iPad doesn't want to buy anything

    Hello guys! I have a very tragic story about the my friend's iPad. She recently bought some apps on her iPad, but iTunes store withdrew no money from her account. Today Appstore asked to recheck the payment card. During the checking process, it asked to contact the iTunes support to complete the payment process. My friend has enough money to buy that apps. Without this procedure, iPad doesn't want to buy any applications, or download free stuff.

    Has she contacted iTunes support : http://www.apple.com/support/itunes/contact/ ?

  • HT201406 Hi there, my iPad doesn't want to start anymore and it's fully charged

    Hi there my iPad doesn't want to start anymore and it's fully charged?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT201412 My iPad doesn't want to respond.It gives a message:iPad not backed up.Can I reset it and how do you do that.

    My iPad doesn't want to respond.It says:iPad not backed up.Should I rest it and how do I do that?

    To Perform a Reset ess here...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • My ipad doesn't want to stream in my apple TV, what to do?

    It use to work, now i updated my Apple Tv and my ipad and now my IPAD music doesn't want to stream to my apple TV how can it get fixed

    Clean the lint/debris from the charging port and plug the cable in.

  • HT4623 My iPad doesn't have update software

    My iPad doesn't have a selection for up date now

    Go back to the article you asked this question from, ignore the instructions for updating it wirelessly, scroll down, and follow those for updating it from iTunes on a computer.
    (87362)

  • HT4623 My iPad doesn't have software update

    When i go into settings my iPad does not have an update software category. What do I do??

    Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
    http://i1224.photobucket.com/albums/ee374/Diavonex/a12310c6040505d18fbb03256ceb7 0de.jpg

  • HT4623 MY IPAD DOES NOT HAVE THE TERM SOFTWARE UPDATE ON THE GENERAL LIST ??

    i am try to update my ipad to 5 and do not have the term software update on my genral page?? how do i proceed?

    iPad first generation doesn't update beyond 4.2.1, you need at least iPad 2 for this.
    If you're using iPad 2 or later, you should connect your iPad to iTunes on a computer and update from there.
    Check out: http://support.apple.com/kb/ht4623
    Good luck

  • Ipad doesn't turn on after ios6 update

    Hello
    I updated to iOS6 yesterday and when I got it this morning it doesn't turn on anymore.
    I let the update running during the night (because it was expected to last 3 hours) and when I woke up the iPad doesn't turn on. I tried to hold the sart button , the home button, long, short, but nothing worked.
    Can you help me with that ?
    Thanks a lot.
    Best regards

    Carioca23:
    So glad the solution worked for you!  I was panicking that my iPad (3rd gen, 4G LTE, wi-fi) was dead and started to search for solutions.  I discovered after trying it a few times that the seemingly dead iPad came back to life and is now working full force with no problems.  The battery was no where near dead, so that didn't cause the problem.  It seems this problem is happening with iPad 2 as well.
    I hope this solution helps many others who are experiencing this problem.  I heard it worked for the iPhone too with this same problem.  Good luck everyone!

  • HT4623 My ipad mini went to restore mode  after updating. when i try to restore downloading software gives error

    My ipad mini went to restore mode  after updating. when i try to restore downloading software gives error

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • HT4623 My iPad does not have the automatic software update and I do not know how to download IOS if under settings there is no software update button available. Do I have to reset my iPad and lose data?

    My iPad does not have the automatic software update and I do not know how to get IOS 6 onto it. When I go into settings there is no software update button.

    If you are really on iOS 5 then look in Settings > General > Software update.
    Otherwise:
    If you are using iOS 4 (or earlier) there is no Software Update in Settings. That feature was first added in iOS 5.
    To update you will have to connect your iPad to iTunes on a computer (preferably the one you sync with and backup to).
    See here: http://support.apple.com/kb/HT4972

  • HT4623 My ipad 2 does not have a software update in the general setting. Can I still update it and if so how?

    My ipad 2 does not have  a software update ing the general setting. Can I still update it and if so how?

    That is only a feature of iOS 5 or later...
    You have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • HT4623 My iPad 2 does not show the Software Update option.

    My iPad 2 does not show the Software Update option.  When I try to update with iTunes the iPad times out.

    Disable or turn off your anti-virus and firewall software on your computer and try the download again.

  • HT4623 My iPad doesn't seem to want to update to iOS 6.  It keeps telling me I am up to date with iOS 5.1.1.  What should I do?

    My iPad keeps telling me that I am up to date with iOS 5.1.1.  What do I need to do to download and install iOS 6?

    You appear to have a first generation iPad, which isn't capable of running iOS 6. To tell for certain, append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    (87210)

Maybe you are looking for

  • How to find out message in a class implementation.

    Hi gurus, I am implementing a class : CL_UKM_COMMITMENT_NOTIFICATION                     with the method : II_UKM_COMMITMENT_NOTIFICATION~EXECUTE_ASYNCHRONOUS The problem is, I am passing the required data to test it, but am not being able to find ou

  • Can I remove the logos from the bookmark toolbar?

    I really hate the inclusion of the logos on the bookmark toolbar. Can I customize it to remove them? It makes for more clutter and I really don't need reminders of logos I see a million times already;-]

  • Load an external clip in all connected user ?

    hi everybody i have a problem and I will try to explain.. : i load a external clip on the stage (with loadClip), and i want for all users connected (FMS) on this time to load also this clip ? how can a triggered the load of the clip to other users ?

  • Answers report

    Hi, I am creating an Answers report where I have some columns. I am creating this report based on a query. The query has a condition like below in the from condition from (select a, sum(b) as C1 from table where cash <> 0 and column = 'principal' gro

  • External number range for Billing Document

    Hi Gurus, Can you please let me know how to get the external number for the invoices? I know there is no standard way but if there is a way around to determine it. And the external number should be first 2 places are alphanumeric and dynamic and the