HT4623 my ipad will not start and i get a itunes message with a plug  and music note symble

My ipad will not start up and i get a plug and music note symble displayed what can i do I already tried the soft boot

You are in Recovery Mode; follow the instructions to recover iPad.
http://support.apple.com/kb/ht4097

Similar Messages

  • TS1363 my iPad air cannot reconnect to my computer and it has  the iTunes logo with a plug picture on a black screen, PLEASE HELP!!!!

    I was updating my iPad air  and in the middle of update it suddently cannot reconnect to my computer and it has  the iTunes logo with a plug picture on a black screen, PLEASE HELP!!!! I did try steps from http://support.apple.com/kb/HT1808?viewlocale=en_US    - IT DOES'N WORK!

    Yes, that is your only option.Yes.  You have to restore.
    Try the following if you have difficulty restoring.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • VERY FRUSTRATED!!!  Downloaded latest itunes on my PC, connected ipad 2, registered device.  It says follow onscreen instructions.  What instructions.  When I turn on my ipad I get an itunes icon with an arrow and a connector cord.  Can anyone help me???

    VERY FRUSTRATED!!!  Downloaded latest itunes on my PC, connected ipad 2, registered device.  It says follow onscreen instructions.  What instructions.  When I turn on my ipad I get an itunes icon with an arrow and a connector cord.  Can anyone help me???

    hi Yojoeyo,
    i have the same problem.  did you figure it out?  it looks like no one replied to your questions. 
    Derek

  • I am trying to run a CDrom on my Mac, and I get the following message: bdf.classic or bdf.osx not supportebdf.classic or bdf.osx not supported d anymore.  How can I fix this.

    i am trying to run a CDrom on my MAC and I get the following message: bdf.classic or bdf.osx not supported anymore.  How can I fix this and run my CDrom?

    I don't think you can fix it. Those messages imply the programs on the CD are older ones for PowerPC Mac (discontinued in early 2006) and does not have the code a current Intel-based Mac requires.

  • I cannot play music from my itunes library.  I keep getting an itunes message that says, "The song could not be used because the original file could not be found."  Is there a fix for this?  Thank you.

    I cannot play music from my itunes library.  I keep getting an itunes message that says, “The song could not be used because the original file could not be found.”  Is there a fix for this?  Has this happened to anyone else?  Is there a fix for this?  Thank you.

    Hello Turintest2,
    I am having a similar problem.  I have over 4000 songs giving me this error.  I certainily don't want to go in one by one and find them.  I know you wrote a script for Windows but I am a Mac user.  Is there a fix for me?  Here is the info on where the song is currently (used by doing the get info)
    Here's a shot of my preferences:
    Just FYI, I know that apparently iTunes is looking for this music in the trash.  However, if I go here:
    Then I find the music there as well.  (Which is where it is in my preferences.)
    Please help!  I don't want to have to go through over 4000 songs and update them one by one.

  • I have an Iphone 4S, when I am on the phone and I get a new message my phone vibrates and rings. How can I stop this from happening when I am on the phone

    I have an Iphone $S, when I am on the phone and I get a new message my phone vibrates and rings, How can I stop this from happneing when I am on the phone

    Flip the Ring/Silent switch. Make sure Vibrate when silent is off in Settings>Sound.

  • Ever since installing on my 64bit Windows 7 install, Firefox has continually gotten more sluggish as time moves on, hangs for 10-15 secs at a time and just gets worse over time with the updates and everything.

    Ever since installing on my 64bit Windows 7 install, Firefox has continually gotten more sluggish as time moves on, hangs for 10-15 secs at a time and just gets worse over time with the updates and everything. It was fast when I first installed, but over the last six mos has slown to a crawl.

    upgrade your browser to Firefox 8 and try
    * getfirefox.com

  • I have lost the ability to upload files to a website. I have to transfer files from my computer to a web site and I get an error message "connection was reset" and the file will not upload. I try to transfer pictures and I get the same message.

    I have to upload a scanned receipt to a website and I get the error message "connection was reset". I have uploaded these receipt for two years and last week I have had to use another browser to complete this operation. I connect to the website and do the report I must do, but I can no longer upload to this site.

    Are you using any additional software for the uploading?
    Try using Firefox in [[safe mode]] when you upload. There is no need to make changes when you see the option. Disable all plugins whilst in safe mode. Then try the uploads.
    You mention [/questions/921993 elsethread] that it is a work site. Have you contacted your IT department. One possibility is that the site is not recognising Firefox 10.
    (One temporary workaround and troubleshhooting test would be to install Firefox3.6.27 [http://portableapps.com/news/2012-02-01_-_firefox_portable_3.6.26_released portable] as an additional browser and try that.)

  • I get a little message with a folder and exclamation point when i turn on..

    when i turn on my ipod i get a message with a folder and an exclamation point. i have tried restoring, reseting, and reinstalling itunes. I was wondering if someone could help me with some advice before i take it to the shop.
    thanks,
    fisher64

    Hello,
    Please go and fina a Mac computer. If you can't find it, go to a nearest Apple Shop and ask them a favour to do a Restore for you.
    Once you plug your iPod (which formatted with a Pc) with a Mac, it will get force mounted and allow you to do the Restore. Worth trying. Once it has being completed, plug it back with your PC, and do a Restore back with the PC

  • I created a book on iPhoto. I click on the buy button, and I get a connecting message with a blue striped rectangle. I am connected to the internet and I have made books before without any problems. I have tried for the past two weeks at various times.

    I created a book on iPhoto. I click on the buy button, and I get a  message that says Connecting with a moving blue striped rectangle. I am connected to the internet and I have made books before without any problems. I have tried for the past two weeks at various times and I get this same message each time. Any ideas about what is going on? 

    First confirm that you can create a PDF file of your book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it. Post back with the results.
    OT

  • I just downloaded Itunes 11.1.4 (64-bit) and am running Windows 7, Itunes will not open and I get an error message about Microsoft runtime and I get an error R6034 and 1114 which says Itunes was installed incorrectly. Can anyone help?

    I just downloaded Itunes 11.1.4 (64-bit) update and am running Windows 7.  Itunes will not run after installing this update and I receive an error message R6034 on Loading Microsoft C Runtime Library incorrectly.  Also Error message 1114 the Itunes Installer was installed incorrectly.  Is there an new update for this problem? Is anyone else having this problem?  Please help.  Thanks.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99425)

  • MacBook Pro can turn on and off, but does not start up. Stays on white screen with flashing folder icon, does not go to desktop.

    MacBook Pro is not starting up. It just stays on a white screen with a flashing folder icon. Have tried restarting while holding the Option key, and the cursor becomes visible and movable, but it does not go to the desktop.

    Hello Sonya_Rose,
    I found this article when researching the issue you describe here named A flashing question mark appears when you start your Mac found http://support.apple.com/kb/ts1440.
    Check the mouse and keyboard
    This issue might occur if a mouse or trackpad button is pressed during startup. Make sure the button isn't pressed.
    If the issue persists, shut down your Mac with its power button, disconnect any external mouse and keyboard, then turn on your Mac with its power button. If the flashing question mark issue persists, reconnect the keyboard and mouse.
    Additional steps
    If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
    Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
    If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
    MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
    Restart the computer, then hold the C key during startup.
    From the Utilities menu, choose Disk Utility. Don't click Continue.
    Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
    Click the First Aid tab.
    Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
    After repairing the disk, try to start up normally.
    Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
    If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
    If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
    If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.
    Regards,
    Sterling

  • HT201263 I holding home button iphone 5 does not start it is blank.  itunes shows waiting for iphone and the applle icon and under line appears

    I unable to restore my iphone 5.  I keep on holding power and home button but it does not show apple icon and cable picture.  If  I try to restore from itunes
    I get "Waiting for iphone" it stays forever and iphone show apple icon and line under it.

    Hi there jey_osman,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Apple logo with progress bar after updating or restoring from backup
    http://support.apple.com/kb/TS3681
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W. 

  • Help. Trying use imessage and keep getting an error message that says the person is not registered with imessage

    I am trying to use imessage and everyone I am trying to send to I keep getting a message that they are not registered with imessage. They all have iphones and I know for a fact they are all registered. I have tried all the trouble shooting steps I have found so far. I made sure my imessage is turned on and set under my apple id and email, I'm connected to wifi. etc... I can use facetime but can not message anyone. Thanks in advance for you help

    Hi, reagans3.
    Thank you for visiting Apple Support Communities.
    I see you are experiencing issues with iMessage.  I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers,
    Jason H.

Maybe you are looking for

  • 13rMBP Mid2014 HDMI does not have 3840x2160 option?

    Does the rMBP 13" Mid2014 HDMI connection allow 3840x2160 resolution? Support article: HT6008 says it should for this model. You can use 4K displays and Ultra HD TVs at the following resolutions and refresh rates via the built-in HDMI port. 3840 x 21

  • How can you make photobook using photos in the order you have them titled

    I spent a lot of time renaming photos ("a1" through "z9") to get them in chrono order when viewing/sorting them by title.  Yet, when I go in to create a photobook it doesn't put them in this new order by title, but rather uses the old naming system w

  • Subscript beyond count ORA-06533

    Hi, I am using Oracle Express with SQL Developer on platform XP. I am attempting to run a procedure that works error free as an anonymous PL/SQL block. I have come across a few problems today and would like to Thank the following, 1. Mohana - creatin

  • Link between table VBKPF and RSEG.

    Dear FI GURUS n EXPERTS, Will you tell me how can I link table VBKPF and RSEG. Thanks in advance. DSC

  • Error in ORM configuration

    Hi All, I am using Weblogic as application server for ORM. I have followed all the steps given in ORM installation guide and used the "Install software only" option. After that I have done all the configurations in weblogic as specified in the docume