HT4623 my ipad will not update the last 2 updates, It goes so far,than it shoes an error has occured

The last update IOS 7.1 will not update on my ipad nor did the prior to that..That is 2 updates, It goes so far,than it shoes an error has occured.

iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Similar Messages

  • HT4623 My ipad does not have the software update as an option. Is there another way to install os updates

    My ipad does not have the software update as an option. Is there any other way to update the operating system? Thank you

    Your tag line shows iOS 6. If you are running iOS 6 you should have it in the settings. Your tag line also shows iPad - so if you have the iPad 1 - you can only update to iOS 5.1.1 and you need a computer running iTunes.
    So if You do not have iOS 5 on your iPad you have to update by using a computer via the latest version of iTunes. You can connect the iPad to your computer and launch iTunes. Select the iPad on the left side under the devices heading. Click on the Summary Tab on the right. Click on Check for Update.
    After you update to iOS 5 or later, you will have Software Update in you settings and can update via WiFi OTA.
    How to update to iOS 5 or later.
    http://support.apple.com/kb/HT4972

  • IPad will not sprint since last update any ideas

    My iPad will no longer sprint since last update two days ago. I have tried updating again but still does not work.

    Hi there Happy painter,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

  • HT4623 My ipad does not have the software update option

    I am trying to upgrade my iOS on my ipad, there is no software update option under settimg, general settimgs.

    See
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 5/6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT201263 My ipad will not show the recovery mode, it goes into DFU mode just fine, but whenever I put it in recovery mode I get nothing but a blank white screen. After doing a restore or update itunes gives me error 37. This all happened due to a failed u

    I updated from ios 5.0.1 to 5.1. Midway through the update itunes crashed. I got it all working again and ever since I have been stuck in a recovery loop. DFU mode works fine, but when I go into recovery mode (yes I am doing it right, yes I have tried pwning, tinyumbrella, etc.) it still just gives me a white screen (I am not getting the plug arrow and itunes icon screen that shows up when you are in recovery mode). I am a huge fan of hacking, mods, and jbs, BUT have never done any on the iPad, (found it pointless).. nevertheless, I am stuck thanks to apple in a white screen and a nonworking iPad. If anyone has any ideas that does not include jbs, updating, restoring, restoring with internet off, restoring in DFU, I would gladly appreciate it. I would take it to the apple store but it was a friends and I didn't purchase it. My friend had the issue formerly and they had no idea what to do at apple (they usually try DFU, restore, and then have nothing else to tell you.

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • HT4623 My iPad does not have the "software update" option at all. I'm running on iOS V 4.3.5 now

    I'm wondering how to do a software update for my iPad. Under the settings section there is no "software upgrade" option. Please help!
    Thank you,
    Kristi

    Settings>General>Software Update is only available in IOS 5 and above.
    If you are using IOS 4, you need to connect to iTune to update software.
    Update to IOS 5 or higher
    http://support.apple.com/kb/HT4972

  • HT4623 My iPad does not have the software update function from general

    How can I update my iPad it doesn't have an update function  in the general section.

    Go back to the article you asked this question from, ignore the instructions for updating it wirelessly, scroll down, and follow those for updating it from iTunes on a computer.
    (104513)

  • HT6058 My ipad will not download the new update.  How do I download IOS 7.0.4 on my ipad?

    I have an update for IOS 7.0.4 on my ipad and when I try to do this it says it has failed.  How I do I update now?

    Do you normally sync to a computer? If so connect to your syncing computer and use iTunes for the update.

  • My PSE12 will not upload the last 3month's of photo's to Adobe Revel.  error says "There was an error contacting the server check your internet connection and try again.

    Recently we had to change our wireless modem, could this be the problem?  Do I have to enter the new modem ID number somewhere?  If so where?

    Hi Jane,
    First, regarding the virus issue, although I cannot promote any specific 3rd party software, there are plenty of FREE and very good anti-virus apps out there. You can Google 'free antivirus" and a good list will come up. You may want to look at a few reviews before you try. I don't know if you use Mac or Windows so you may have to do a little research on which is best for your computer platform. You can run the software and it will help clean off your system if there's a virus.
    Second, regarding your Elements sync to Revel, you may need to disable and then re-enable the Revel sync agent from within Elements, which you find in Preferences. In addition you may try signing out and then back into Revel via Elements.
    Let me know how that goes. If the disable/re-enable doesn't help, I'll get an Elements team member to see if they can help.
    Best of luck on the virus software!
    Glenyse

  • My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload and am afraid it 'crashed'

    My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload midway and am afraid it 'crashed'

    Try putting it into recovery mode.
    Connect iPad to your computer via USB while it's turned on.
    Open iTunes
    Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
    Power off the iPad completely (wait for the progress spinner to disappear).
    Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
    After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
    Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
    A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
    Click on the "Restore" button and the process will begin.

  • Mt iPad will not allow me to update my apps. My username and password are correct and I can buy apps with no problem but when I try and update it just says "cannot open iTunes"

    My iPad will not allow me to update apps although I have no problem buying new ones. It says "cannot connect to iTunes" each time I try.

    Same problem for me, too.  It happens on my iPad, iPhone, and iMac.  Weird because I have great Internet connectivity and I can log into and view my iTunes account.  I've downloaded three new apps with no problem.  But my iPad shows 14 apps needing updates, my iPhone shows 2, and my iMac shows 1.  In all cases, clicking on "update" and entering the password results in the message, "Cannot connect to iTunes Store".  It's the same result across multiple WiFi networks, even after resetting them.
    I'll see if someone at the Genius Bar can help and then I will repost.

  • Aperture crashed and will not open after last update.  Anyone else have this problem?

    Aperture crashed and will not open after last update.  Anyone else have this problem?

    Yes.  See this very forum for 50 threads on it, that explain the solution.

  • My Sony Xperia ZL does not recognize the last update of the software

    My Sony Xperia ZL does not recognize the last update of the software or from the same mobile or from the computer app, I formatted the phone but it still does not recognize it when I give updates check it tells me that the phone have the latest software.
    Thanks

    You can find the latest available software update information on our product blog. When an update is available for your phone you will get a notification.
    If want to know more about software roll out process and how it works please see this topic.

  • I downloaded a show on itunes and it will not play the last 15 minutes.  It just stops and can't go any further.  How do I fix this?

    I downloaded a show on itunes and it will not play the last 15 minutes.  It just stops and will not go any further.  What can I do?  I am using a pc.

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • My ipad will not allow me to update software ios 5.1.1?

    my ipad will not allow me to updated software ios 5.1.1

    You do not say Why or what happens when you try...
    See Here  >  Updating to iOS 5
    http://support.apple.com/kb/HT4972

Maybe you are looking for

  • How to install Adobe reader XI 11.0.0.9 on windows XP

    I want to run Adobe reader XI 11.0.0.9 on windows xp and access cloud file server on Acrobat.com. But failed. When I tried to open the files on Acrobat.com, but there is any respones. However, 11.0.0.9 works well on Win7. I want to know how to config

  • Account Not found on resource

    Hi frenz, I got the following error when I tried to edit the user A29666. Account 'A29666' not found in Resource 'SecurID - usatli69'. XPRESS exception: Can't call method listResourceObjects on class com.waveset.ui.FormUtil ==> com.waveset.util.Waves

  • IPod menu display on iTunes

    Since I've got iTunes 7 everytime I connect my iPod to the computer the iPod display settings within the iTunes menu (artist, track name, year etc) are lost or restored. Kinda annoying. Any thoughts? Mac   Mac OS X (10.4.8)   Screw Windoze Mac   Mac

  • Parsing HTML files

    Hello, I have a question about parsing HTML files. Usually when I get an HTML file and I need to find all the text in it I do this. This stuff just collects all of the hyperlinks and ignores all the html tags just keeping the actual text. It's fine f

  • Reference object from function?

    I still can't get a hold of how in flash you're supposed to reference objects in the display list. I have created a main container. Placed other containers inside that will act as layers. Then I've placed items inside those layers to animate using Tw