HT4623 my iphone 4s does not install the new software. i can only see the apple logo and the loading-bar, which does not change at all. how can i fix that?
hi!
can somebody please help me?
i wanted to update my iphone 4s to ios6. no problems until the install/loading bar appeared on the iphone. that was 2 hours ago. nothing happened there is no progress being showed.
i also reset my iphone (home button + standby button). result: the apple logo and the bar appear, but still nothing happens...
thanks for helping!
kr,
clemulus
I took my phone to apple they replaced the speaker. That corrected the problem
Similar Messages
-
i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
in the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??
Unknown "source"? Do you mean unknown "error" followed by a number?
http://support.apple.com/kb/TS3221
Follow the instructions in the article. When you connect your phone again, you may have to press both the home and sleep/wake buttons until the Apple logo reappears, then continue pressing the home button until iTunes detects the phone in recovery mode. -
i dowloaded an app cant rember name but i was ment to be a jailbreak thing (typed in on sarfari jailbreak me) but it was not what i hopped for so i tryed deleting it (and an game boy app off this app) but no X came up on the corner so i tryed resating it but its now frozen and thers the apple logo and a loading bar under it ?
PLEZ HELP ME SOME ONETry forcing your iPod into Recovery Mode...
Follow the Steps in this Article...
Recovery Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
My touch is frozen on a black screen with the apple logo and a load bar, nothing works, tried resetting and everything, any suggestions?
In that case....if you have Apple Care, give support a call - otherwise, walk it into the nearest Apple Store.
Good luck. -
My macbook pro will not get past the gray screen with the apple logo and a loading bar.
My macbook pro will not get past the grey screen with the apple logo after attempting to load for hours. I have already tried resetting the NVRAM/PRAM and a couple other tricks and no luck. Anyone out there have suggestions for my problem? Help would be much appreciated since i use my computer for everything at school and i am in desperate need to get this baby working again.
You didn't say which OS in your tag, but maybe you might find something here.
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/PH4191
http://support.apple.com/kb/PH7213
http://support.apple.com/kb/HT4125
http://support.apple.com/kb/HT2213 -
I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help
Connect the iPhone to the compter you usually sync with
and use iTunes on that computer to do the restore. -
Mine keeps on saying that the device could not be restored, "an unknown error has occurred (2001)"!! Guess it's stuck in that dreaded "iPhone Recovery Mode" loop. The question is, which way out??? How do I get it out of the recovery loop??
A quick Google search for Error 2001 would indicate that this occurs when you have a jailbroken phone or were trying to downgrade iOS. Is that true for you?
-
I tried to install the latest update on my iPhone 4s and now it seems to be frozen with an apple icon and a loading bar on the screen. I've tried turning it off, plugging it in to the wall outlet, plugging it into my computer. Nothing works. Any ideas?
connect it with the computer and let it finish or restart the process it takes a very long time
-
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
Hi, every time I install the Premiere Pro, an error:213:10 shows up, how do i fix this?
Someone please help! Thanks!Error code 213:10
-
my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.
Try:
- Another cable
- Another USB port
- Reboot the computer
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?
Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
What if I have an iPhone and its sends/recieves messages with our apple id which is my moms email? How do I fix that so that when I text my friends it doesn't show up with my moms email but my number?
Hi lfeddrix,
You can send and receive Messages from the Apple IDs and phone numbers signed in to your iMessage section in the settings of your phone. We have an article that explains a little bit about this, and it can be found here:
iOS: Using Messages
http://support.apple.com/kb/ht3529
This section is the most appropriate for your situation:
You can change the address that new iMessage conversations are started with in Settings > Messages > Send & Receive > Start new conversations from:. Note that this setting applies only to new conversations. If you would like to change the address from which messages are sent, first change this setting, and then delete the existing conversation and start a new one.
iMessage responses will be sent from the address the recipient most recently messaged. For example, a friend sends you a message to your Apple ID. Responses in this conversation will be sent from your Apple ID, even if you've selected new conversations to start from your phone number.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
During boot Yosemite shows a grey screen with the Apple logo and a progress bar - is this normal?
During boot Yosemite shows a grey screen with the Apple logo and a progress bar - is this normal?
Same here after upgrade yesterday.
I can get OS utilities up using CMD R or holding the shift key (eventually), but if I simply then reinstall the OS will it not loose everything on my drive? I do have it backed up on Time Machine? What a nightmare - Apple Support does suck. I am not paying £25 for them to call me to tell me how to fix a bug in their OS software upgrade. Any help
Also does anyone know if it is possible to use time machine to go back to Snow Leopard? I have wasted much of the day on this now
Cheers
Simon
Maybe you are looking for
-
Hi, We have Sharepoint 2013 search center site which is claim based with NTLM authentication set. we have Sharepoint 2010 farm also running which are FBA authenticated. While crawling Sharepoint 2010 sites having FBA authentication from SP 2013 searc
-
File/FTP to ABAP Proxy (file as attachment)
I have the following scenario: File/FTP -> XI -> ABAP Proxy but not the normal case. What I need is the picked file as attachment and the file name. I hope this is possible. I have found the following blogs: /people/michal.krawczyk2/blog/2005/11/10/x
-
I have iOS 5 updated on my iPhone and I have the iMovie app purchased on my iPhone. I used the new red eye and enhancement features for pictures on my iPhone that came in the iOS 5 update - works great. The problem is when I upload those "corrected
-
How to pass where clause in lov's
Dear all i have creation page in that three lov's are there 1.customername 2,person name 3.address my requirement is person name and adress will come based on customername(companyid) and also orgid in my case i taken 3 lov vo's for lov's whet should
-
Restoring Accounts in Mountain Lion Mail
Hello all. I used to have around 18 IMAP accounts and 3 POP accounts in my Mail application. For whatever reason I moved the entire contents of library/mail/v2 to the desktop in order to fix a problem that had caused mail to stop working (a huge emai