HT4623 my iphone cant charge after updating it
after updating my iphone ,it went to low battery after that it can't charge
Use an certified Apple charging cable - either Apple brand or one approved by Apple. Knock-off cables won't work with iOS 7.
Similar Messages
-
HT4623 why i cant activate after update my ip 3gs
why i cant activate after update3gs to 6.0.1 , how can i acivated ;(
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier? -
I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.
Hi melvin victor,
Welcome to the Support Communities!
The information below may help you troubleshoot your iPhone battery issue:
iPhone Battery and Power - Apple Support
http://www.apple.com/support/iphone/repair/battery-power/
Battery & power
Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
I hope this information helps ....
- Judy -
What do these symbols mean on iPhone 4 screen after updating
Charge symbol with arrow pointing to iTunes symbol?...If you do not have a computer with iTunes running on it, then make an Apple Genius appointment at your nearest Apple Store, or Authorized Apple Support center. If you do not have one of those near by, a friend with iTunes installed.
-
Iphone 4s won't charge after updated to ios 6.1.3
iphone 4s won't charge after updated to ios 6.1.3
Different adapters and usbs have been tried, and now power has been drained.
Apple support says there is nothing they can do about it, and they surggested me to pay 199 for a new iphone.
Is there anybody having the same problem?I'm having the same issue with iphone 4.
Seems to work ok after i connect it to itunes but then the next day i have to do it again. -
i downloaded iphone software but after updating ipod i seem to be asked to download again to update phone. what do i do to avoid downloading again, but update iphone
What specifically is the message saying?
-
i have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i plugged it into itunes and it is stuck there too... i cannot even restore it. does anyone know what to do?
I have had this same issue but thankfully fixed it. Follow he steps below:
Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
Go to Settings > Reset > Erase All Content and Settings
Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
After everything has sync'd back to your phone everything should work fine.
Hope this helps. -
my iphone 6 plus after updating to IOS 8.2 seems to have a problem with the touch id witch doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' . I have multiple fingerprints and none of them appear to work.
Hi Giannis,
If you are having an issue with Touch ID not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
Use Touch ID on iPhone and iPad - Apple Support
Start with the section titled Clean the Touch ID sensor and then Get help with Touch ID.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
My iphone 5c crashed after updating to IOS 8.02 and now i don't have anything from the last 3 months. What do I do?
Don't worry about that. iPhone stuck in recovery mode always happens when you update the iOS on your iPhone. There are two ways to solve it.
First is is to put your iPhone in DFU mode.
Step 1. Turn off iPhone
Step 2. Hold down the Power and Home button.
Step 3. When you see the Apple logo, release the power button but continue holding the Home button down.
Step 4. Open iTunes and wait for it to tell you that it’s in restore mode.
If DFU mode can't solve the problem, I'm afraid the only solution is to try some 3rd party software, like iPhone data recovery or something like that. You may simply try the tutorial here: How to Fix iPhone that is Stuck in Recovery Mode. -
My iPhone 5 hanged after updating new software version
My iPhone 5 hanged after updating new software version
paulette3163 wrote:
When I plug my phone into my laptop and open itunes,
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download -
Ipad 3 won't charge after updating to ios 6. even with apple charger
ipad 3 won't charge after updating to IOS6. even with apple charger. just say "not charging" next to the battery symbol
Hi,
I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
Will monitor it and if no joy will go to a apple store
Thanks -
I have iPhone 5s. After updating to 8.0.2 , it freezes often when i cut the call... happened 7 times ... had to switch off every time .... what to do?????? help....
Hi there SraZamora,
The troubouleshooting steps in the article below can be helpful when troubleshooting unresponsive devices.
iOS: Not responding or does not turn on
-Griff W. -
Hi , I use Iphone 3g and after update of Facebook i can't use it.Please help
Hi , I use Iphone 3g and after update of Facebook i can't use it.Please help
If you still have the old version on you computer, then delete the app and resync it. the new facebook is compatible with iOS4.3 or later and you cannot get beyong 4.2.1
-
My iphone wont charge its update prblm or not
my iphone wont charge its update prblm or not..........
How are you charging the device? Are you using the Apple brand provided charger & cable? Are you connecting it to a USB port on a computer or directly to a power outlet? How long are you leaving the device to sit an charge?
-
I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Can anyone help me solve the problem. thanks
Its trying to tell you to connect it by usb to a computer to reflash a failed firmware flash
You should comply
Maybe you are looking for
-
User account control won't let access to hp mediasmart photo
user account control won't let access to mediasmart photo.
-
I dont know what forum this should go in, since it uses a lot of different macs, but i'll try here What kind of external RAID storage would you recommend if I need about 8-10 GB of storage. i need it to appear on one volume, preferrably coming in as
-
Finder flashes and disappears at top. Computer dead on only one account.
My iMac G4 (800 mhz) running the latest update/version of Tiger is suddenly acting up on one account only. On other accounts, no problem. On the problem account, the finder bar appears and disappears about every second. I can start to open applicatio
-
Expert, We are buying an engine assembly from our Vendor, but there is no visibility for us to verify that Fixed Process Control(FPC) (quality)requirements have been met by the engine. So we need to know the details of the inner parts of the engine a
-
Hello everyone!! I'm using the MT RFSG Generate PSK.vi that you can find in the examples menu of LabVIEW. I get a good singnal because I see it in an Spectrum Analyzer, but now I want to see the same signal but in the LabVIEW. The problem is that the