HT4623 My Iphone wont turn on...this happened a few months ago with an update and it crashed my phone
I have an I Phone 4 and it was working this morning went to use this afternoon the phone is dead. I tried charging it wont turn on at all. I had this happen a few months ago when my phone automatically updated and it crashed the phone. Apple had me do a restore to the phone. I did copy everything to ICloud but is it a software or hardware problem and why wont it boot up. or how do I get it to boot up. Its saying in ICloud its offline.
If safe, carefully slide iPhone into a plastic bag, double bag it for sure. Use items like pencils or kitchen utensils so you do not touch it. Make Genius reservation, and take it to Apple for replacement under Warranty.
Similar Messages
-
Recently some of my contacts are no longer displaying in my contact list, but I know they're in memory because when one of them calls me my phone recognizes the caller. This happened a few days ago, so i must have changed some setting,but I have no idea which one. Can anyone help?
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
i am trying to download trial CC, but i am receiving error cod 205. how can i fix this problem? few months ago, i used trial CC and deleted it.
Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html -
I am deciding to get CC for photographers package. I already have Lightroom 5 (I bought this separately a few months ago) The photo package includes Photoshop and Lightroom but I only need Photoshop. Would I get a discount if I only need photoshop? Is this a possible option?
There are no discounts. the package is already as cheap as it gets.
Mylenium -
Have an iphone 5c 8g. The home button has stopped working. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode and no evidence of damage.
If you are playing in hockey arenas a lot or if you are bringing it into bathroom same time as shower it may not seem like much but overtime the steam can acquire and build up in the phones usb dock flex cable swell as the home button flex cable. Bring again into apple store and should be covered under warranty again. could also be a delay in a 8gb 5c software may just be very lag.
-
my iphone ran out of bettery yesterday and ive had it on charge over night and it still wont turn back on. ive tried the reset option and other charges but cant get it back on... help
Hi lacey88.
I found a helpful article that will help troubleshoot the power issue you are having with your iPhone. I realize that you may have already attempted most of these steps, so lets review the last three:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Steps 5-7
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M. -
a few days ago when I send a message from mail or reply to a message it does so in the name of one of my contacts not me. what do I change to get rid of this problem?
I found the same issue. I went into my yahoo email and did a search for duplicate addresses. Most of those type emails were spam and I think maybe they hacked into my contacts. Once I removed that person the issue was solved. You could add the person again after the issue is resolved.
-
I bought a new Iphone 4s at walmart with my at&t upgrade and today, it caught fire, melted a hole in the battery and melted the screw connectors on the bottom of the phone and the back came off.. Im not sure what to do on this deal.. Im now trying to get it to work and dont want to spend 500.00 on a new phone when this one messed up for no reason.. Luckly it just burnt one of my fingers.. where is was it could had burnt my house down very easy.
<E-mail Edited by Host>If safe, carefully slide iPhone into a plastic bag, double bag it for sure. Use items like pencils or kitchen utensils so you do not touch it. Make Genius reservation, and take it to Apple for replacement under Warranty.
-
I can't hear anything on my iPad mini4 what do I do this happened a few days ago too
I can't hear anything on my iPad mini 4 and I tried everything what do I do?!? Even when I have headphones on!?
Who is your email provider?
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If yes, try deleting the mail account and adding it again. -
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
My iphone wont turn on , its stuck on the apple
my iphone wont turn on , its stuck on the apple
See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
my iphone wont turn on it turned off due to a low bat and now wont turn back on when charging! iv tried plugging it in to 4 charges and still nothing 2 computers as well. help please
Keep on charger and Reset, hold both home and power buttons until the iPhone begins to start. Sometimes this can take about 20 seconds of holding both buttons.
-
Iphone wont turn on it was 90% charged
iphone wont turn on it was 90% charged
Reset, hold both home and power buttons until the iPhone begins to start. This usually take about 10 seconds of holding both buttons. If still problem, connect to Wall Charger, it may turn ON itself, if still nothing, keep on Charger and Reset, this can take about 20 seconds time of holding both buttons while on charger.
-
my iphone wont turn on so i connect to itunes and its says restore and update so i click it and it gets half way through then stops and says error(6) and wont update or turn on please can you help me thanks
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
IPHONE WONT TURN ON TODAY????
All of a sudden today out of the blue my Iphone wont turn on?
Anyone else ever have this problem?
Any ideas why or what i should try?
Help please
RobFirst try a reset:
Press the sleep/wake button & home button at the same time, keep pressing until you(hopefully) see the Apple logo, then release. Ignore the slide to power off, should it appear.
If that doesn't work:
See if you can force the phone into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Maybe you are looking for
-
My i pod touch the charging pins are bent, can i trade it in to apple for a new one or money how ever much it is worth??
-
How do you work with iTunes 10.6 and 10.7?
My G5 will not run 10.7 so if I update the powerbook running Lion then will the library on the G5 be able to sync to the iPhone? or will the libraries be incompatible? beyond that are there any unforseen castrophies which I have not thought of yet? T
-
Tiger install not recognizing hard drive
G3 desktop/400MHz/512 MB RAM/20 GB Western Digital EIDE HD/ OS X 10.4 retail install DVD. My friend gave me the aforementioned Mac, minus the HD which he kept, but with the 10.4 install disk. The computer was working fine before. I had a blank NTFS-f
-
What's the 'best practice' way to get email and fax number from vendor?
Hello *, could anybody let me know what the 'best-practice' is to get the fax number and smtp address from the vendor master? Is there a preferred function module I should use? Thanks a lot, Torsten
-
Background (main) layer has a padlock which "Indicates layer is partially locked". Would you please show me how to unlock the layer. PS CS4 v. 11.0.2 Thanks.