HT4623 my ipod touch is dead. I have charged it, tried to reset it but nothing is happening. Any suggestions on what to try next? I connecte to iTunes and tried tried revive it that way...but nothing is happening. Can someone please help me?
My ipod touch is dead. I have tried charging it, resetting it, using iTune refreshers etc.....nothing is happening...the screen is still black.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
'm trying to transfer the music from my iPhone 3G to my iPod shuffle using iTunes but I don't know how. I checked on websites but i dont really trust them cause I don't want all my music to be erased (cause i spent a lot of money on them) can someone PLEASE help me. Why is iTunes so complicated.
iTunes match - http://www.apple.com/itunes/itunes-match/ - see FAQ at end too
http://arstechnica.com/apple/2011/11/itunes-match-your-questions-answered/
http://ipod.about.com/od/UsingiOS5/a/Itunes-Match-Frequently-Asked-Questions.htm
http://forums.macrumors.com/showthread.php?t=1277415 - deleting items from your computer but saving them in iCloud. Yes, but risky. -
My iphone 4 is taking forever to sync...I let it sync all night and only completed about 1/4 of of the songs downloaded. Apps seem to be fine. I have tried restoring it and that didn't do anything. Can someone please help?
how many songs are syncing cuz i only have at most 200 or so and it takes a while so it might be how many songs are syncing to the device
-
Hi All,
I have drop box, have used ibook and still looking for a solution. I have a number of PDF documents, some one page, some multiple pages in both landscape and portrait format. I would like an app that I can easily place multiple PDFs into it and show case them like a presentation or slide deck. Is there an easy app that is like a hybrid of drop box and keynote?
Thanks,
LindaThere are some apps for both PCs and Macs that can be used to combine PDFs into one PDF document.Then you could upload the final PDF to the iPad.
http://www.wondershare.com/pdf/transfer-pdf-to-ipad.html
http://www.bythom.com/pdffaq.htm
Apps to Manipulate PDF Files on your iOS Device
http://www.labnol.org/software/edit-pdf-on-iphone-ipad/
How to Transfer PDFs to an iPad
http://www.dummies.com/how-to/content/how-to-transfer-pdfs-to-an-ipad.html
Cheers, Tom -
Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance
You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it. -
Please help me.
I wanna buy a new screen but I don't wanna buy it and it be a waste of money so can someone please help me?Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
i have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?
i just baught it off someone.. so im unsure if it was jailbroken or not.. and i dont think its under warranty now.
is there a software or something along those lines that would indicate what peice of hardware is faulty?
i baught it in this recovery loop thinking it was going to be a cheap way of getting a new phone without having to do much.. but now im starting to think its a brick -
i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!
Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.
-
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
HI THERE,
CAN SOMEONE PLEASE HELP ME? I HAVE BEEN TRYING TO RESTORE MY IPHONE4 FROM IOS 4.3.3 TO 5.1.1 FOR THE LAST 6 HOURS AND EVERYTHING GOES THROUGH OK UNTIL IT GETS TO THE RESTORING IPHONE SOFTWARE, IT LOADS 1/2 THEN FREEZES. IVE LEFT IT LIKE THAT FOR AT 30MINS AND NOTHING HAPPENS. IVE TAKEN THE CORD OUT AND HAD TO TURN PHONE OFF AND RESTART, THEN LOAD IT BACK UP TO ITUNES ALL OVER AGAIN. MANY TIMES!!!!! IVE CHANGED CORD AND USB STILL NOTHING? IVE GOTTEN TO THE POINT WHERE I MAY HAVE RUINED IT ALTOGETHER AND NEED TO BUY A NEW PHONE? PLEASE I HOPE SOMEONE OUT THERE CAN HELP?:
MANY THANKSYou may not get a response as you are shouting at everyone.
All caps indicates shouting, is considered rude, and is difficult to read.
Many will not read such posts.
Try turning off you caps lock and asking again. -
I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?
You said "The messages i received when i did not have signal are not showing up."
How do you know received them?
If the sender got a message that the Messagers were not delivered than they were never delivered and the only way for you to get them is for the sender to resent them -
I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?
Also, if you can't get them to work, what is the error message you are getting?
Baron Samedi -
hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....
Connect it to iTunes on a computer and update it from there.
(73609) -
Hi,
My iphone 4 won't connect to my mac book, it says that I need to install to latest version of itunes 11.1. When I go to itunes and try to update, it says that I have the latest version (10.6.3). Can someone please help me!
thanksYou are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.
-
Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.
Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please.
Maybe you are looking for
-
How to pass the internal table data to smartforms
Hi Gurus, I have a problem in passing the internal table data to the smartforms. In the print program I get the data into one internal table "LT_PRDLBL1". I am passing this internal table to the other in print program by calling the FM_NAME. CALL FUN
-
I have a photosmart 7280 and it spits out blank sheets between every other printed sheet. My daughter has the same printer and it is doing the same thing. Driving us crazy !! Does anyone have a solution?
-
GTIN & UPC Stored on the Material Master Configuration
Experts, I am looking for a way to store the UPC code and the GTIN number on the material master in ECC. Like the EAN/UPC field I am looking to know if there is a way to have both the GTIN and the UPC field stored in the same field with SAP calulati
-
How to check decimal value in numeric field
Is there any way to find number of decimal digit is being used. 999.444 444.45 344.23 33.666666666666 Query provide rusult after the decimal value. thanks.
-
Safari causing heat and excessive fan use, had to switch to Chrome
Lately, every time I open Safari the computer heats up and the fan blows continuously. This doesn't happen for Chrome, so I've had to use Chrome exclusively lately. In Activity Monitor, Safari Networking has an energy impact of 100 and Average Energy