HT4623 my phone died while doing the iOS 6 update.

Now it doesnt want to turn on, the apple logo comes up and then it just turns right back off. The charger doest work. Please help.

Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons. If still problem, charge your iPhone with Wall Charger for 10 minutes even if it does not show it is charging. Then you should Restore your iPhone with iTunes on computer. Here are simple steps. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore Button of iTunes.

Similar Messages

  • HT4528 Does the iOS 6 update pertain to the iPhone 4?

    Does the iOS 6 update pertain to the iPhone 4? Not iPhone 4s. Version 5.3.3

    Only adds Siri to iPad 3:
    Siri will be available only on iPhone 4S and iPad (3rd generation) and requires Internet access. Siri may not be available in all languages or all areas, and features may vary by area. Cellular data charges may apply.
    Above from:
    http://www.apple.com/ios/ios6/

  • I am getting a service start and stop alert while doing the windows server updates.

    HI
    I am getting a service start and stop alert while doing the windows server updates. Services are wmiApSrv , WPDBusEnum. Can you please help me to under stand why i am getting the service start and stop alert.
    Thanks & Regards
    Abhilash K Joy

    Hi,
    The WMI Performance Adapter (wmiApSrv) service provides performance library information from Windows Management Instrumentation (WMI) providers to clients on the network. This service only runs when Performance Data Helper is activated.
    This service is installed by default and its startup type is Manual. When started in the default configuration it will log on using the Local System account.
    You can try troubleshooting the issue using Clean Boot to check if the issue is related to third-party software.
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135/en-us
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • My phone refuses to install the iOS 6 update?

    After spending a lovely hour and a half waiting for the iOS 6 update to be downloaded to my phone, it immediately continued on to the installation process. Halfway through the process, my phone restarted and no updates occured. I went to Settings > General > Software Update and the program is still downloaded, but no matter how many times I click the "install" option, it just gives me this: "Unable to Install Update. An error occurred installing iOS 6."
    Any advice on what to do now? Because I am obviously lost. And frustrated.

    I can't help you, but a lot of folks would consider you lucky

  • HT4623 Why can't I download the ios 6 update on my ipod touch 4th generation?

    Why can't I download the ios 6 update on my ipod touch 4th generation?

    The poaster said that is what he tried and got an error message.
    Zach the Apple User wrote:
    Settings>General>Software Update  To get it on the ipod without itunes. Not sure if you tried it.

  • Can't restore iPhone after turning off while doing the iOS 8.0.2 update

    I wanted to do the iOS 8.0.2 update. This didn't work and my iPhone 5 turned off. Now it says that I have to connect ti iTunes. I tried to restore it but it always says that a mistake appeared. Now i can't use my iPhone anymore and i don't know what to do

    it took me 5 hours to get iTunes to sort my phone out!!
    I have an iphone4 I updated to iOS8.2 this ruined my phone. The bloke in Apple store told me to reset my phone. Whilst it was in the reset mode it froze meaning it was a brick! I couldn't get rid of the apple logo and iTunes was not recognising my phone!!
    I changed the USB ports and that appeared to work. BUT once my phone was on it did not ask if I wanted to restore from icloud ...... So I've lost all my settings and text and have no clue how to get them back. My iPhone is like new, which is rubbish coz it took me over a year to get it how I liked it!!

  • My Iphone 4s goes into recovery mode after doing the IOS 6 update.

    I just tried doing the IOS6 update and after about 2hrs into it my phone goes into recovery mode. The Itunes icon appeared on the phone. When i connected it to Itunes, I tunes said i had to restore and update my phone.
    BTW my son did the update in about 15 minutes i tunes says my phone will take 7 HOURS!!!
    HELP!!!!

    Hi guyz just fixed mine just now, I used an app named iREB please refer to the below link. Make sure youre iphone is plugged in to your USB then launch the app as admin. As soon as the app is running go to the "Recovery Mode Loop Fixer" tab & hit the "Set Auto-Boot True (Fixes 1015 errors / Recovery Loops). It will restart your iPhone in just a moment & get you back to your homescreen.
    I hope this will help those whos undergoing this horrifying iPhone problem.
    Just additional info.
    Issue: Sticked with USB & Itunes Logo during upgrade attempt to iOS 6.0
    Iphone 4S (iOS 5.1.1.(9B206)
    32 GB
    Official Factory Unlock
    PC-Win 7 Home Premium 64bit
    iREB Download Link:
    http://www.yourtechinfo.com/2012/05/how-to-fix-recovery-mode-loop-or-itunes.html #Downloads:
    Message was edited by: johnsawan79

  • My iPhone 5 crashed last night while doing the ios 7.0.3 update, it shows the connect to iTunes and I have try to restore my phone from my computer but it won't do it. It will fail to restore the phone

    What do I do next?

    Start by providing specifics of what is occurring (including any error messages that are occurring) when attempting to restore the device.  That is if help is actually desired.

  • My ipad looks like it is locked up while doing the ios 6 upgrade

    i began the update about 20 minutes ago and the ipad screen has not changed at all?

    Hi ocholocoperros,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help if you're only seeing the "connect to iTunes" screen:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    All the best,
    Jeremy

  • HT4623 my phone keeps stalling during the restore and update any help please ?

    Can anyone help me ive been at this all day and no luck?

    Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons. If still problem, charge your iPhone with Wall Charger for 10 minutes even if it does not show it is charging. Then you should Restore your iPhone with iTunes on computer. Here are simple steps. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore Button of iTunes.

  • HT4623 I started to update my iphone4 software to iOS 7.0.4 while in the process of updating a text message came in- now it keeps saying checking for update then an error comes up that says try again . How do I finish updating my phone?

    I started to update my iphone4 software to iOS 7.0.4 while in the process of updating a text message came in- now it keeps saying checking for update then an error comes up that says try again . How do I finish updating my phone?

    Hi
    A little information will be of a great help, witch iPhone did you upgrade, memory , and version of software ( iOS 8.x.x )?
    Try restarting you iPhone and make sure you have a god internet connection , get as close to your wifi router (1-3 meter / 2-9 feet ) as possible. Don't use restore to factory  settings before you tried other options .  And most imported du you have an iCloud backup.
    //Sorenc

  • If I did the IOS 8 update and didn't back my phone up before the update, does that mean all of my pictures are gone?

    If I did the IOS 8 update and didn't back my phone up before the update, does that mean all of my pictures are gone? While I was doing the update it told me to plug my phone into iTunes. I did so and then it said my phone needed to be "restored" but it said I was going to get my pictures, messages, music and contacts back later on. Now being one day later I did not get any of that back.

    If you don't have a backup then you can't get the data back.
    It's not typical for an update to require a restore, but for a handful of people the update gets interrupted, and this happens.

  • HT4623 Help! After doing the IOS 7.1.1 update my iPad 4 just shows a iTunes icon and a cable with an arrow. It won't turn on. Can someone tell me how to fix this?

    After doing the IOS 7.1.1 update on my iPad 4 the screen just shows the iTunes icon and a cable with an arrow. I can't get the device to open. Can someone help me with this issue? Thanks!!

    Yes. The phone will be back to default settings.
    Once the phone is up and running you can try and restore your backup again.
    http://support.apple.com/kb/ht1414

  • HT201263 While doing the restore the connect to Itunes image is still on my phone and has not shut off?  The Itunes "status" area now says "Processing File" and has said this for 15 mintues with no change. What do I do??? This is the second Restore I've a

    While doing the Restore the "connect to Itunes Image is still on my phone and has not shut off or changed since starting the REstore.  Now Itunes status bar says "Processing File" but has not changed or done anything for 15+ minutes.  What do I need to do?  Let it go or is it not working????  FYI, I tried to update to the 6.0.1 (I believe thats this update)

    This was the third Restore I've attempted today.... 'm not sure what all I did including unplugging and plugging it back in, and messing with tryign to select my phone vs. my husbands but it starting moving again.  It's now attempting to "back up" from ICloud... we'll see. Thanks

  • Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?

    Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?
    I am working on a Win 7 Machine and I have disabled all Firewall and Antivirus Tasks as this caused problems on an other update.

    Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?

Maybe you are looking for

  • HT204053 separate one apple id into two

    For years my wife and I have had one id, now our son is old enough and has his own iTouch and a hand me down MacBook. He has been buying music and apps under our ID. We need to seperate him and his stuff from us. Can this be done without him losing h

  • PAP2T: Incoming calls being blocked by Router.

    Hi, I am trying to use an unlocked PAP2T Adapter with Telus home network in Canada and am not able to receive calls. I can make outgoing calls to any number in the world, but whenever I get a call back, the phone doesn't ring & later I find it in Fir

  • A new corecentre is released 1.7.3.0

    Linked Edit: Btw : It's an update for CK8-04 crush chipset (nForce 4) Confused about the crush naming : Nvidia CK8-04 = nForce4 , Nforce4 Ultra , Nforce4 Pro , Nforce4 SLI Nvidia CK8S = nForce3 250 Nvidia CK8S2 = nFforce3 250GB Nvidia CK8 = nForce3 1

  • Installation of HTML and subsequent changes

    OK, first off let me apologise for asking what could potentially be a very stupid question. I am but merely a programmer and ask for some assistance on behalf of a DBA. The DBA in question has installed a copy of HTML DB v2 on a production server but

  • Dreamweaver Created Rollover Images

    Can Dreamweaver rollover image buttons validatein an HTML online Validator? I usually use Dreamweavers rollover image option to create my menus but the HTML never validates because of it. I've ran pages through the validator site and its the code tha