HT4623 My phone does not give me an update option. It is a 4s I think. I go to Setting, General and there is no Software Update tab. Any suggestions? Thanks

My I phone 4s does not have an update option to get IOS7. How do I downloead?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Similar Messages

M127fn phone does not give signal fax when pressing 1,2,3

Hi, I am Marc and I am new to this forum. Kindly excuse me of any wrong doing on a prior notice. Thanks! I bought the HP M127fn 4in1 unit one month ago and I am still not able to use this unit fully. On my old fax, Panasonic KX-FP342, when the phone rings and I answer, I can make a normal phone call or press the fax signal button to give a fax signal if it is a fax. However, If I do not answer, the panasonic unit picks up the line and gives a fax signal automatically after 5 unanswered ringtones. With the HP M127FN, I am not able to do this procedure. For description, I have the HP unit connected to the wall outlet and 2 phones in my house. One of the phones is connected to the HP Printer extension port and the second phone is connected to another separate socket ( to the same phone number ). When the phone rings for 5 times and I dont answer, the machine picks up the line and gives a fax signal automatically ( which is the normal procedure). But, the problem is when I answer the line. When I pick up the line and the caller asks me to give him a fax signal, I press 1,2,3 ( i tried this using the normal line and the extension line ) but nothing happens on both lines. So i appologize to the caller and ask him/her to call again which is really annoying me since I get around 10 to 15 faxes per day. I want the unit to answer automatically give a fax signal ( regardless of the caller's type ) after 5 ringtones and I want to answer the phone and be able to give a fax signal by myself if necessary. Fax answer type = automatic, rings type = all rings, extesion phone line = yes, rings to answer =5. Please Help!!!!

Hi , Welcome to the HP Forums! I see that your HP Laserjet m127fn phone, does not give signal fax when pressing 1,2,3. I am happy to help! According to page 48 of your printer's user guide: LCD control panel 1. On the product control panel, press the Setup button.
2. Select Fax Setup, and then select Fax Recv. Setup.
3. Select Extension Phone.
4. Make sure that the On option is selected.
With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3 sequentially on the telephone keypad. Turn this setting off only if you use pulse dialing or if you have a service from your telephone company that also uses the 1-2-3 sequence. The telephone company service does not work if it conflicts with the product. 5. Press the Back button to return to the Fax Recv. Setup menu.
6. Select Answer Mode.
7. Select Fax/Tel, and then press the OK button. With this setting, the product automatically picks up all calls and determines if the call is a voice or fax call. If the call is a fax call, the product handles the call as an incoming fax. If the incoming call is detected as a voice call, the product generates an audible synthesized ring to alert you of an incoming voice call. 8. Press the Back button to return to the Fax Recv. Setup menu.
9. Select Fax/Tel Ring Time.
10. Select the number of seconds after which the product should stop sounding the Fax/Tel audible ring to notify you of an incoming voice call, and then press the OK button. Hope this information helps! “Please click the Thumbs up icon below to thank me for responding.”

How do I Restore my iPhoto library from my time machine if it does not give me the restore option?

How do I Restore my iPhoto library from my time machine if it does not give me the restore option?
When I go into my backups and click on the iPhoto library it does not come up with an option to restore it just says open and of course then won't let me open it because it is a back up in time machine? I need these photo very important.

Mac Basics: Time Machine backs up your Mac - Apple Support
For detailes TM support post in the forum for your OS rather than the iphoto forum
LN

The billing option does not give me the NONE option. What do I do, I have an iPad 2 version 7iOS

I tried tocreate an ITunes acc do download free apps from the app store, but it does not give me the NONE option in the billing screen. What do I do?

Hi Zeadee,
If you want to be able to download free apps without a credit card, you will need to set up a new Apple ID by following the instructions exactly in this article:
http://support.apple.com/kb/ht2534
Cheers,
GB

HT4589 Automatic Update does not give me an update from FCP X 10.0 to FCP X 10.0.5. How do I update? I have version 10.0.0.

I have never received an update from my original FCP X 10.0. I recently upgrade to Mountain Lion, purchase additional plugins and FCP X cannot use them unless I upgrade to atleast FCP X 10.0.3. Automatic Update does not give me an update for FCP X. Version 10.0.5 does not show on the Apple Support Download page. I purchased Compressor at the same time and it has given an update. How do I down find the download? Any suggestion would be appreciated.

And if it does not come automatically, move your Final Cut.app out of the Applications folder, open App Store, click Purchaces, and Install it from there - it will download the latest 10.0.5 version.
If FICPX is not listed there, it's because you bought it with another AppleID!

Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd ten apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions

Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd gen apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions?

How old is the MacBook Pro? AirPlay is only supported on 2011 and newer models, due to the requirements it has in hardware for graphics acceleration.

HT4623 my phone does not show up in my computer after update

my phone does not show up in my computer after update

Hey there, i got the same Problem with my MacBook Pro (Mavericks 10.9.4) and two iPhone´s 5 with the iPad 2 and the iPad Air, (all with iOS 7.1.2) since 2months. SOLUTION???
Since the change of Snow Leopard on Mavericks, the entire system of the MacBook is much slower. This is already noticeable at the beginning (start the MacBook Pro). It runs through the entire software. z.Bsp. Open Safari / Outlook, iTunes and more. for about 2months absolutely no back-up of my devices is possible!!
Every time when you connect the hardware (iPhone 5 / iPad 2 / iPad Air) iTunes stops responding and needs to close above EXIT NOW!! No back-up's my hardware (see above) possible!!!
but iPhoto is running with the devices and at least I can transfer the images.

HT4623 My phone does not have the Update SOftware option between About & Usage in General under Settings. How do I update it then?

My phone does not have the Update SOftware option between About & Usage in General under Settings. How do I update it then?

This is called Support a Community of users who are helping each other. Save the sarcasm or smart remarks. I read must of your answers to other people as well and you seam to have a pattern like a bully. Sorry that our questions are above you. If you have no helping comments save them for yourself. READ what support means, you should try it once in awhile.

My pull down menu above the green "back" button disappeared recenly after I intalled an update. How to I get it back so I can print since right clicking does not give me a print option?

I used to have a tool bar at the top of the screen that had file, print, help, etc. After I recently installed something ( I can't remember what), the tool bar no longer appears. Help I need it back! I need to print screens and right clicking does not allow for a print option and my print screen button on my computer does not get me anywhere either. Please describe any help in simple terms - I'm just an average computer user! Thanks.

In Firefox 3.6 and later on Windows you can hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu on a toolbar.
Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

HT4623 my phone does not want to unlock the sim

my sim is locked and does not want to unlock with the code

put the sim card in another phone
change the settings so the sim card don't require the sim pin code
put it back in the iphone
they don't support the pin code request at startup

HT4623 my phone does not have the software update option

my ipone 4 does not have the software update option?

Do the following:
Open the App Store app on your phone and update all your apps so the will work with the new iOS.
Connect your phone to your computer and open iTunes. If prompted that there is an update available, decline.
Sync with iTunes to create a new backup and transfer any purchases from your phone to your iTunes library.
Import your photos to your computer for safekeeping as explained here: http://support.apple.com/kb/HT4083.
Go back to iTunes, click on the name of your phone on the left side, go to the Summary tab to the right and click on Check for Update (or Update).
This will download iOS to your computer (which may take a while), then install the update on your phone. Pay attention to the progress information in iTunes on the top of the screen, and any information that appears on your phone during this process to be sure you don't disconnect your phone prematurely.

HT4623 my phone does not dim when not in use ?

-my iphone does not diim when not in use, the problem start two days ago, it is only 12 months old ?

Hey Teltee,
If you haven't already, I would double-check your Auto-Lock settings and make sure they haven't changed:
Auto-Lock
Locking iPhone turns off the display. Nothing happens if you touch the screen. You can still receive calls and text messages, an you can adjust the volume and use the mic button on the iPhone Stereo headset when listening to music or on a call.
Set the amount of time before iPhone locks
Choose General > Auto-Lock and choose a time.
via: iPhone: About General Settings
http://support.apple.com/kb/TA38641
Welcome to Apple Support Communities!
Best,
Delgadoh

HT4623 my phone does not have the software update option on it, how do I update my phone without this?

My phone is saying that I need the iOS 4.3 update but I do not have the software udate option available to me on my phone. How do I still update my phone?

If you have an iPhone 3G then iOS 4.2.1 is as high as it goes...

HT4623 My phone does not have. A software update tab in general menu

How do I upgrade iOS if I can't get into software menu.
This handset does not have the software tab

If you have an iOS version lower than 5, you won;t have an Update button in settings as it was only added in on iOS 5. You'll need to connect your iPad to a Computer running iTuines (Can be a Mac or a Pc doesn't matter) and follow the update prompts.
You'll probably want to back up the iPad before updating though.
In the article you came from, Scroll down to the section titled: Update your device using iTunes

HT4623 my iphone does not turn on after update to ios 7

Kindly help me to solve this problem
I updated my iphone to the new ios 7
but the iphone does not turn on
when i turn on it gives Hello slide to set up
then after that it shows the message connect to itunes
i connected and restored the backup
synczed already
but the iphone does not turn on
only showing the message 'connect to itunes"

Something has become corrupted hold down the Home and Power Button whilst plugged into Computer and with iTunes open it should then find a iPhone in recovery mode reinstall the software and the back up it sounds like the back up had something wrong and has put this on to the new install.

HT4623 My phone does not give me an update option. It is a 4s I think. I go to Setting, General and there is no Software Update tab. Any suggestions? Thanks

Similar Messages

Maybe you are looking for