HT4623 my phone does not have the software update option
my ipone 4 does not have the software update option?
Do the following:
Open the App Store app on your phone and update all your apps so the will work with the new iOS.
Connect your phone to your computer and open iTunes. If prompted that there is an update available, decline.
Sync with iTunes to create a new backup and transfer any purchases from your phone to your iTunes library.
Import your photos to your computer for safekeeping as explained here: http://support.apple.com/kb/HT4083.
Go back to iTunes, click on the name of your phone on the left side, go to the Summary tab to the right and click on Check for Update (or Update).
This will download iOS to your computer (which may take a while), then install the update on your phone. Pay attention to the progress information in iTunes on the top of the screen, and any information that appears on your phone during this process to be sure you don't disconnect your phone prematurely.
Similar Messages
-
My phone is saying that I need the iOS 4.3 update but I do not have the software udate option available to me on my phone. How do I still update my phone?
If you have an iPhone 3G then iOS 4.2.1 is as high as it goes...
-
how do i update the software on an iphone 3gs when the software update option is not in the settings on the phone?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
HT4623 My ipad does not have the software update option
I am trying to upgrade my iOS on my ipad, there is no software update option under settimg, general settimgs.
See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 5/6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
HT4623 my ipod does not have the software update option
When I connect to itunes to update my ipod it tells me my ipod is updated but when I try to download an app it tells me I need to update to iOS 5. How do I fix this problem?
To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
Identifying iPod models
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I'm wondering how to do a software update for my iPad. Under the settings section there is no "software upgrade" option. Please help!
Thank you,
KristiSettings>General>Software Update is only available in IOS 5 and above.
If you are using IOS 4, you need to connect to iTune to update software.
Update to IOS 5 or higher
http://support.apple.com/kb/HT4972 -
My I-Phone 4 does not have the Software Update option under my settings? Where do I go now?
Try actually reading the article you linked from. Especially the section on updating using iTunes...
-
Hello, I have an ipad2 with iOS 4.2.7 but am trying to update it to a 5 or so. The problem is that the"settings" environment on my pad does not have the "software update" option. Please what do I do to enable me update my iOS? Any help would be appreciated. Thanks
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
My ipad does not have the software update as an option. Is there any other way to update the operating system? Thank you
Your tag line shows iOS 6. If you are running iOS 6 you should have it in the settings. Your tag line also shows iPad - so if you have the iPad 1 - you can only update to iOS 5.1.1 and you need a computer running iTunes.
So if You do not have iOS 5 on your iPad you have to update by using a computer via the latest version of iTunes. You can connect the iPad to your computer and launch iTunes. Select the iPad on the left side under the devices heading. Click on the Summary Tab on the right. Click on Check for Update.
After you update to iOS 5 or later, you will have Software Update in you settings and can update via WiFi OTA.
How to update to iOS 5 or later.
http://support.apple.com/kb/HT4972 -
HT4623 why my iphone does not have the software update option
why my iphone does not have the software update option
Are you sure you're connected to a network and that your iphone isn't on airplane mode?
-
HT4623 My iphone does not have the Software update button
my iphone wont update it does not have a softwear update button please help how can i update my phone
It won't if you're running iOS 4 and below. You'll need to update the software by connecting your phone to your computer and updating through iTunes.
-
HT4623 My iPhone does not have the software update button in the general section
I do not have a software update button in the general section
How do I updated iPhone with new softwareWhat version of iOS software do you have currently?
You can also update in iTunes:
Select the device in iTunes and you can find this on the summary page. All 3rd party app updates are done through the App Store updates tab.
Hope this helps! -
My Ipad does not have a software option so I do not get any updates - what can I do?
Check out the Apple link below.
http://support.apple.com/kb/HT4972 -
I'm having trouble updating my iphone 4... In the settings under general & then about, there is not a "software update" option available. Is this normal? I have also lost the ability to send & recieve pictures thru txting. This happened after I tried to update thru itunes.I can't purchase app's with the newest update. I'm hoping someone can help me solve this issue as iphone wants to charge to have a conversation with me. Has anyone else had this particular problem? Thanks
UPDATING iOS
Over the air updating of iOS needs iOS 5 or later
The following link explains how to update http://support.apple.com/kb/HT4972
This link explains how to update using itunes http://support.apple.com/kb/HT4623
This explains how to transfer purchases to your computer http://support.apple.com/kb/ht1848 -
My iphone 4 has not been updated since I purchased it a year ago. When I go to settings to click software update as per instructions, the software update is not listed. How & where do I go to update my phone?
ThanksYou'll have to use iTunes on your computer to get your iPhone to the latest version of iOS. From there you'll be able to update directly from the iPhone for future releases.
http://support.apple.com/kb/HT4972
Regards.
Maybe you are looking for
-
Mapviewer: circles in legend
Hi, for some reason Mapviewer renders circle-markers as ellipse. The style is dynamic: mv.addMarkerStyle("SL.OK", MarkerStyleModel.MARKER_CIRCLE, "black", "green", null, null, null, "5"); Here is a screenshot: http://www.imagehosting.com/show.php/214
-
BI Content extractor for table LFB1?
HI folks, I'd happy to know if there is any BI content extractor which is able to extract the LFB1 table contents to BW. I know there is 0VENDOR_ATTR but it only seems to deal with the "standard" vendor data (like is in table LFA1). In fact, we are e
-
I would like to use the validation widgets when submitting data via Spry.Utils.loadURL. The validations work automatically when the form is submitted, but I want to call the Spry.Utils.loadURL in a function in an onSubmit function. Is there a way to
-
Hi All, I have created a process wih multiple Human Activities, when I am trying to do the Output mapping of Human Task 1: I am not able to see any nodes/attributes in the process context on the Right side. I am able to see the TaskOutput on the left
-
I purchased some music videos and TV shows from iTunes Music Store. At first no problem. Played great. I connected my iPod to someone elses computer who had iTunes 4 (not video capable). Ever since I have not been able to view my music videos or TV s