HT4623 my phone is stuck on the connect to itunes screen and it doesn't doe anything when connected to itunes. what do i do to fix it?
My phone is stuck on the connect to itunes screen when i started to update it and when i connect it to itunes nothing happens. What do i do to fix it ?
Hold down the Home and Power button to shut off the iPhone. Keep it disconnected from the computer. Then, hold down the Home for 20 seconds. Connect it to the computer while continuing to hold down the Home button. Wait for iTunes to say your iPhone is in Recovery mode. Then, restore.
Similar Messages
-
I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?
Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
My iPhone is stuck on the plug to iTunes screen and it will not do anything what do I do because my computer has crashed?
Can you use another computer to restore?
-
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
HT4623 my phone is stuck on the apple icon :( how to start it up? pleaaase help
my phone is stuck on the apple icon how to start it up? pleaaase help
it happened after i tryed to update the software
how to fix this???
plz helpyes it was jailbroken
now after i restored it from itunes i'm having an other problem
theres a message saying '' activation request could not be completed -
I tried to update my iphone through my itunes and recieved an error message. The phone then became frozen on the conect to itunes screen and I can not use the phone. I tried to reconect to itunes but it does not recoginze my phone it just stays frozen.
Try recovery mode as described here. You may have to try to get into recovery mode more than once to succeed.
http://support.apple.com/kb/HT1808 -
My iphone is stuck with the iTunes logo, an arrow and powercord on the display. It will not power down or allow me to do anything. I updated to the most recent OS version this morning after my battery drained overnight (it was fully charged yesterday afternoon) and this was the result. I also have downloaded the latest version of iTunes on my laptop ...
My 2-year old iPhone 4s running iOS7 suddenly started doing the same thing (randomly going into Recovery Mode) almost every morning for the last week or so. It recovers OK (albeit back to factory presets), but I'd sure like to know what's going on. Any info?
-
Plz help
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Help, is anyone having trouble when they plug their iphone in through the USB connection wit the controls on the steering wheel not working to operate the music and phone book?
Bump and update
iphone 5 - speaker phone and headset work properly. Cannot hear through ear speaker and callers on other end are saying they cannot hear me.
I Have heard about hearing aid mode I set that to on and there was no change.
ALso tried inserting headphone jack in and out several times no use
any help would be greatly appreciated please and thank you. -
Please help me with this?
You need to restore the phone from Recovery Mode: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever
Hi Gammer576775!
Here is an article that will help you troubleshoot this issue with your iPod touch:
iPod touch: Hardware troubleshooting
http://support.apple.com/kb/ts2771
Will not power on, or will not turn on unless connected to power
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if the display turns on and…
The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
My computer froze a few weeks ago and I got a grey screen that told me I needed to restart the computer. When I restarted, the computer froze on the grey screen with the apple logo. No pin wheel. Nothing. Eventually the fan begins running at warp speed. I've scoured this discussion board for a solution and I've read every possible thing I can find on the Internet regarding this issue. Nothing is helping. I've tried reseating memory, resetting PRAM, I replaced the PRAM battery, all the standard stuff on the message boards. I can't run a disk, i cant boot from a disk holding down c, but I can hold down the option key to open the hardware test, I've done the extended and short test and passed both.
When I hold the shift+command+v it tells me-
com.apple.driver.appleintelcpupowermanagement isn't a valid Mach-o (magic is cefaedfe)
Error mapping module file com.apple.driver.appleintelcpupowermanagement
Can't map com.apple.driver.appleintelcpupowermanagement in preparation for loading
Can't determine dependencies " "
Can't alloc class " " blah blah blah
I'm pretty sure this is some sort of kernel panic. This computer has been pretty much trouble free in the 8 years I've owned it. I had recently upgraded iLife to iLife 07 before the trouble happened.
I've also been able to get it to boot once or twice since then. I get a message that says" the computer was shut down blah blah do you want to send a report to apple?" I'm able to do some basic stuff like back up some pictures onto my external hard drive and then it will freeze again and the fan will come on. While I had access to the desktop I checked the disk repair permissions and they were all messed up. I tried repairing permissions but I don't think it worked. Also the time and date was messed up which made me think it was a battery thing. Lately I haven't been able to boot at all past the apple screen. I don't have much money but I have to get this fixed!
Some specs--
Power mac g5
CPU @1702037.8 ghz
Boot rom version 5.2.4f1
Memory 8 gb, 400mhz
Pmu/fcu versions:127/6.0.1 f0
Running OSX 10.5.6
Just to be clear this is the power pc from around early 2005, not the intel based g5, not the water cooled one, and not a Mac Pro!
Please help me!!HI, have you blown the dust out lately?
Does it boot better/further if allowed to cool?
If you're sure the RAM is good, try the Hair Dryer trick...
http://discussions.apple.com/message.jspa?messageID=13240047#13240047
https://discussions.apple.com/message/15223603#15223603
https://discussions.apple.com/message/15499912#15499912
https://discussions.apple.com/message/15613068#15613068
https://discussions.apple.com/thread/3270112
https://discussions.apple.com/message/16053892#16053892
No power light at all...
https://discussions.apple.com/thread/3692775?tstart=0
It can show on any G5, and even many other computers & electronic devices of the period.
http://www.macintouch.com/reliability/pmg5.html
http://lowendmac.com/ppc/power-macintosh-g5.html
And see this last one in particular...
https://discussions.apple.com/message/16781690#16781690
Heat gun better...
https://discussions.apple.com/thread/3916312?tstart=0
If we don't get more help or answers here, feel free to join my site & ask...
http://x704.net/bbs -
The software update failed. And it's not seeing iphone when connected.
When I logged in it said there was an update for iTunes software. However the update failed. I quit iTunes. I then plugged in my iphone but iTunes is not seeing it.
Are you able to update iTunes using a .dmg downloaded from the Apple Website?
http://www.apple.com/itunes/download/ -
I am trying to open my Premiere Elements 12 and it isn't responding. How do i fix this?
z00mz00mgirl
What computer operating system is your Premiere Elements 12 running on?
Have you ever opened the program and created a project with it? In other words, is this a "it worked before but not now" or "it never worked before" issue?
1. Determine if the problem exists with and without the antivirus and firewall(s) disabled.
2. Right click the desktop icon, then from the drop down menu, select, click on, apply Run As Administrator.
3. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
4. Have you installed and are running the program in a User Account with Administrative Privileges?
Let us start here and then decide what next.
Thanks.
ATR -
Nano is stuck in the "do not disconnect" screen while unplugged
i have been using my ipod nano for about a year and a half and i just connected it to update it, but itunes didnt respond for a while i tried disconnecting it but it doesn't work and now its stuck in the do not disconnect screen and it is unplugged. I've tried all the buttons, reconnecting it and the hold button but it still wont respond.
What can i do?
ipod nano Windows 2000Reset the iPod. (hold down the menu and center button). If that doesn't work, try a restore with the iPod updater.
Maybe you are looking for
-
Hi All, i have a small code :- String selecteID = "QP|10009"; String radioId []= selectedID.split("|"); int i = 0 ; System.out.println("radioId[0] ="+radioId); System.out.println("radioId[1]= "+radioId[++i]); Its output is radioId[0]= radioId[1]=Q Ho
-
Hi, I wanted help on how to go about configuring Caching in OSB? The latest install of 11g OSB comes with Oracle Coherence. I wanted to also know how is the refresh parameter set. For eg, I have configured service result caching on a Business Service
-
Non-HTTP(non-web) socket connection
how do i setup non-HTTP(non-web) socket connection on my nokia 5235? please help...wanna whatsapp so badly
-
I just updated adobe CC now Lightroom 5 will not launch
I just update Adobe CC which included PS CC, PS CC 2014 and LR5. LR5 flashed the start up screen very very quickly and disappears. It never launches. Your assistance is appreciated.
-
How to read checked or unchecked of JCheckBox in swing?
how to read JCheckBox in swing,i m not able to do that, every time its take true value only.