HT4623 My tab for software updates does not exist under settings or any other location. Where do I update from now

I am trying to update my Ipad however the software upgrade tab is none exsitant. How do I upgrade now.

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes as described half-way down the page that you posted from.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand sidebar of iTunes and selecting 'Backup' (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Similar Messages

  • Data Entry Tab for Numeric Indicator does not Exist

    Hi
    I'm trying to set the data range for numeric indicators on LabVIEW 10.0.1. For some reason when I go to properties of my numeric indicator, there is no Data Entry Tab as explained on the NI website: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/changing_data_ranges_of_nu/. Also, in the data type tab, there is a section for range but everything is grayed out. Any help is appreciated. Thanks
    Solved!
    Go to Solution.
    Attachments:
    Question.png ‏159 KB

    Hi
    Thanks for the replies
    I just realized that data entry on a numeric indicator doesn't really make sense. But my question is, how do I go about setting data range for a numeric indicator? Based on this tutorial : http://www.ni.com/pdf/manuals/320998a.pdf (Page 128/250) in the older versions there seems to be a data range tab or option when you write click the indicator. In my case, the range is greyed out and I tried to play with it with no avail.
    Thanks very much

  • How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

    How do I download IOS5 onto a first generation ipad?  Software Update does not appear under General in Settings on the first generation ipad.

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    Hi vindog60,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
    Issues installing iTunes for Windows - Apple Support
    Cheers,
    Alex H.

  • HT2404 how do you get your money back for software that does not perform as advertised?

    how do you get your money back for software that does not perform as advertised?  I purchased the batch coverter to watch .swf video which it states it supports, but it will not open the files and I want my money back!!!!!

    tell Apple.  http://www.apple.com/feedback/
    iTunes Store Terms and Conditions specifically states: All sales and rentals of products are final.

  • My netbook says my built in webcam for dv6-1259dx does not exist.

    So I tried to use my webcam the otherday but it wouldn't let me, I've been searching for the last two days for a solution but cant find any. It's been fine till the otherday and I haven't done anything nor deleted anything that could have caused it to not work. I have downloaded the hp mediasmart webcam driver and updated it, updated the BIOS, but it says that It can't find my webcam. I've been searching through the forums and I've tried updateing everything (failed), tried using device manager (the image device that the forums suggest updating does not exist), I do not have multiple webcam programs on my computer that would cause interferience, I've scaned for hardware changes but it gives me no suggestions nor does it notice any problams, i've basically tried everything HP customer help could give me, but no luck. If anyone got a solution please help! Thank you

    See Lorna...it's almost second nature to you now,
    editing those js files! I TOLD you you could do it!
    Mark, it's EERIE that you should say this to me today because this is exactly what I have been thinking! I can put a song on a page with one eye shut now, and I can zip around those files pretty well (except for the recent fiasco where I didn't even look at the right folder). I also notice that the level of my writing is sounding more technical and familiar with digital world jargon. I remember how you told me I could do it, and you were right. You all were right and I feel more knowledgeable and at a point where I suspect that I can take steps on my own. HTML is a strange land, but just being able to edit that .js file and FIND it by navigating for it in Text Edit has made me feel much more competent.
    Before iWeb I didn't realize what Text Edit was for. I used it to take quick fast short notes. I never understood that concept of "opening something up in so and so application." The first time I clicked OPEN in Text Edit, and I saw all those danged files staring at me with beady eyes, I wanted to throw a white hanky and run for the hills. Not any more!
    Lorna in Southern California

  • Error "Account assignment 00 for  purchase document does not exist " when u

    Hai,
    I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
    The error says " account assignment 00 for purchasing document does not exist".
    The scenario is very simple.  I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10.  Tax code is U2 ( 7% tax).
    I am passing the following at header level.
    Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
    At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
    Does this error has got any thing to relate configuration matters?
    Regards,
    Upender

    Hi Upender,
    In some cases, depending on the type of PO / Posting,
    you might have to populate the accounting data itab and pass in the BAPI parameter.
    you can select the accounting data from EKKN for the PO.
    Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
    Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
    Thanks,
    Ram

  • Error: Number range  for object RESB does not exist

    Hi
    I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as  follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
    Many thanks
    BE
    Error Msg Text:
    Number range  for object RESB does not exist
         Message no. 61501
    Diagnosis
         The system cannot create a document for an MRP element if no number
         range or interval has been maintained in Customizing of MRP or if t
         number range you have maintained is not allowed.
         Below is a list of MRP elements that are affected:
         Number range object  MRP element
         PLAF                 planned order (operative oder simulative)
         EBAN                 purchase requisition
         RESB                 dependent requirements
         MDSM                 simulative dependent reqmts (long-term plannin
         MDTB                 MRP list
    Procedure
         Check the number ranges in Customizing. If you do not have the necessa
         authorization, please get in touch with your systems administration.

    Hi
    Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
    NR Object                             MRES/DREQ
    No.                          From Number            To Number          Curr Number          Ext
    01                           0000000001               8999999999           380                    blank
    02                           9000000000               9500000000           blank                  checked
    RB                          9500000001               9999999999           blank                  checked
    Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
    thanks
    BE
    Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

  • Number range  for object MDTB does not exist - Message no. 61501

    Hi All ,
      I have done the necessary configurations in PP say
    Order Type
    Order Type Dependent Parameters
    Scheduling parameters for planned & production order
    Confirmation parameters
    Availabilty check etc
    and iam able to create planned & production order and confirma the production order.
    I want to configure for MRP: -
    Settings done are
    Have activeted planning file entry for all plants.
    When i run MRP system throws a error <b>Number range  for object MDTB does not exist - Message no.61501 </b>
    Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
    I just tried plant parameters,standard 0001 is not available for copying.
    Suggest me how to proceed to set MRP.
    Shankar

    Hi shankar
      it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied  for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
    in SE16N  check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
    hope this helps
    regards
    SK

  • The bp id for org unit does not exist

    Dear expert,
    after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
    in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
    what can we do to solve the issue?
    will there any impact if we keep no bp id for the org unit?

    Hi,
    You can use the transaction CRM_OM_BP_INTEGRATE.
    Select the Org unit and enter the org id in the input field and execute it.
    Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
    Regards,
    PP

  • HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

    why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

    Hi lgmmo,
    I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
    A quick Chat session should get you fixed up.
    Please let us know if you have additional questions.
    Best,
    Sara

  • Error: Bank N.A. for country IN does not exist"

    Hello Gurus,
    When i am monitering Bdoc messages in Tcode:SMW01 ,there is an error message as"Bank N.A. for country IN does not exist"
    So please help me to solve this problem.
    Thnks in adv,
    Divya.

    Hello Gregor ,
         I didn't do Initial Download of the Customizing DNL_CUST_BNKA in Transaction R3AS.
    Regards,
    divya

  • Stock for required data does not exist during repack of product

    Hello,
    I have the given situation, during the packing of a product (which is unpacked) in the Work Center I get the following error message:
    "Stock for required data does not exist
    Message no. /SCWM/L3104"
    After a debugging session we have found the cause as being the field FLGAVQ (Indicator: Handling Unit Contains an Available Quantity) in the structure /SCWM/S_HUHDR_INT. My question is if somebody knows from where this mark comes and if you stumbled on the same problem and if so how did you manage?
    All the best,
    Claudiu Maxim

    Hello Sridhar,
    Thanks for the response, the packing operation in our case is done in the SCM EWM environment in the specific Work Center. The transaction with which we pack is /SCWM/PACK - Packing - General. Do you have a solution for this problem with regards to the EWM environment?
    All the best,
    Claudiu Maxim

  • Number range  for object BANF does not exist

    Hi Guru's
    I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below  despite changing the numbering range on the affectred documents. Please help.
    Number range  for object BANF does not exist
    Message no. 61501
    Diagnosis
    The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
    Below is a list of MRP elements that are affected:
    Number range object MRP element
    PLAF planned order (operative oder simulative)
    EBAN purchase requisition
    RESB dependent requirements
    MDSM simulative dependent reqmts (long-term planning)
    MDTB MRP list

    Hello,
    You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
    E.g for NB doc type number range number is 20
    and in OMH7 number range number 20  has interval from- 2000000000 to 2099999999
    same way
    for RV doc type number range number is 21
    and in OMH7 number range number 21  has interval from- 2100000000 to 2199999999
    Regards,
    Shailesh

  • Hierarchy for material types does not exist

    Hi,
    I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
    In the first level of configuration ai heve set up the logical systems and the system landscape.
    when i am in R3AS
    DNL_CUST_BASIS3
    DNL_CUST_PROD0
    DNL_CUST_PROD1
    DNL_CUST_SRVMAS
    the above objects wre green when i executed
    For the object MATERIAL
    I am getting an error
    Hierarchy for material types does not exist
    Message no. COM_PRODUCT_API000
    Diagnosis
    Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
    Procedure
    Check whether the ERP system material types have been imported successfully and exist as categories.
    Proceed
    If necessary, import the Customizing object DNL_CUST_PROD1.
    Kindly guide me

    Hi,
    It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
    Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
    http://service.sap.com/srm-inst
    Regards,
    Masa

Maybe you are looking for