HT4623 My update to ios 6 seems stalled - I cant get past the network security pane. Suggestions?

I made the mistake of hitting the update and now I cant access anything on my iPhone - I am usually more confident with tech but this is scary

Local Apple rep fixed problem. Thanks Restart

Similar Messages

  • HT4623 i update to ios 6 and my phone cant get any signal again

    my iphone 4gs is not working properly after updating to ios 6
    can someone plz help

    if your no able to get signal try these
    -pulling out sim card and retraying it
    -turning on airplane mode then turning it off
    -setting>general>reset> reset network setting

  • I have an iphone 4S and stupidly let it update to iOs 7 and now I cant get wifi or bluetooth. Anyone know how I can get back the previous update when my iphone was working perfectly?

    I have an iphone 4S and stupidly let it update to iOs 7 and now I cant get wifi or bluetooth. Anyone know how I can get back the previous update when my iphone was working perfectly?

    Your WiFi/Bluetooth chip has failed.  Bring the phone (and $199 if outside the warranty period) to Apple for replaceement.

  • Help ! i have done an IOS 5 udate and cant get past the track my iphone set up screen. i have done restored 3 times. going crazy

    Udated to ios 5 and cant get past the find my iphone screen.

    Try deleting an other icloud backup and see if it will automatically backup.

  • HT4623 I have done an iCloud download but now cannot get past the Terms and Conditions page, even after accepting.  It's just a revolving door!

    I have downloaded an updated version of iCloud but cannot get past the Terms and Conditions pages, notwithstanding accepting them.  Further, I cannot get back into iTunes.

    Since I do not know what you actually did maybe:
    http://syncor.blogspot.com/2013/09/ios7-and-missing-agree-button.html
    Otherwise:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>iCloud and delete the account from the iPod and then sign back in.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • HT4623 I have an iPhone 4 and have installed iOS 7, but I can't get past the setup. It gets hung up on agreeing to terms and conditions. Anyone know how to fix?

    The setup hangs up at 'agreeing to terms and condtions'. Anyone know how to fix?

    I seem to have gotten around the issue. I set the date of my iPad to 1 month prior (July), restarted the iPad, and the session timeout blockade went away.  Many folks are saying this worked if they changed the date on their Mac or iPad or whatever device they were using for the update.

  • IPhone 3GS stuck on "Find my Phone" page while updating to IOS 5.  How do I get past this?

    I am in the process of updating my iPhone 3GS to IOS 5.  While updating the iCloud settings, it is now stuck on the "Find My Phone" page.  The image is still moving, but when I click next, nothing happens.  Please help!

    pop the sim card out...
    full restore, will wipe out the system & lock code...
    resync with your data, and you should be good...

  • Just updated to iOS 5.0.1 and cannot get past log in in set up. Help!

    The setup wouldn't accept my mobile me password and when I tried the apple id that I use for everything else (iTunes, my iMac, ect) it says that the information is incorrect.  I tried several times to have it send the password reset to my email, but I still haven't received the email to reset it.  I also tried the security questions and couldn't get passed the date of birth which I know I entered in correctly.  I need my phone to work so any help would be greatly appreciated!
    Thank you in advance!

    Solved the problem.  Had to go into reset password from my iMac and it processed correctly.  Thank you anyway! 

  • HT201263 I have never used a passcode (four numbers) to start my IPAD2 but after the IOS7 update, it wants a passcode. I cannot get past the opening screen which demands a passcode therefore I am unable to access settings or passcode locks or even self de

    I am unable to access settings or passcode locks or even self destruct which is looking quite appealing.
    IOS7 update leaves my Ipad2 asking for a passcode which I have never used.
    Aaarrgghh

    I was hoping that some bigwig who decided to throw this update into the mix might have figured out what happened.
    I started at 0000 , 1234, 3333 ,9999 nothing except this Ipad is disabled.
    ............ a bit like IOS7!

  • Cant get past the login after update fail? (OSX 10.8.3)

    Hi!
    I have a big problem! This morning i tried to update my mac to the lastest version (10.8.3). Somthing made it to fail and i hade to reboot the system.
    Now the systems starts as before but when i type in my password and press enter, the screen flashes and i go back to the login again?
    I can start the system i Safe mode but not i normal mode.
    I have tried to repare the system with the disc tool but i still does not work.
    Any ideas?
    //VIktor
    Macbook pro mid 2009

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.  
    These steps are to be taken while booted in safe mode.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copying and pasting as well. Omit the final line ending in “$”. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 3
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null 
    Remember, steps 1-3 are all copy-and-paste — no typing. Also remember to post the output. 
    You can then quit Terminal.

  • The facebook app on my iphone 3 was running slow so I deleted it and when i tried to install it again it said it was only compatible with IOS 4.3 which i cant get on the iphone 3, is there a way of me getting the facebook app back?

    How can i get the facebook app on my iphone 3 without being able to have IOS 4.3?

    You may have a chance if you still have the app in your iTunes library.

  • HT4623 I cant get past the rescue email on the upgrade

    I am stuck please help

    Same problem, its tabled multiple times in this email as usual Apple has decided to ignore the issue - la la  la nothing could possible be wrong if Apple did it.

  • HT4623 i cant get past the resuce email screen during the upgrade

    i cant get past the resuce email screen during the upgrade

    Hello DionSimmons,
    The following article provides information and troubleshooting steps that can help get your iPhone activated.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    Cheers,
    Allen

  • HT4623 upgraded to IOS 7 and now can't get past set up page

    I have iphone 4, updated to IOS 7 and now can't get past set up page?  I restored from itunes when prompted and it said complete but still brings me back to set up screen.  Any suggestions welcome.
    Thanks

    Thanks.
    Is it safe to post ids on here?

  • HT4623 just updated my iOS and now it won't let me past the screen on find my IPhone

    I can't get past the FIND MY IPHONE Screen after IOS update...it's like the continue button and or arrow aren't highlighted and don't allow me to select them so I can't move on.

    I do go thru safari and I get thru the log in into my account but when it comes to showing your statement it blocks it. I had no problems until I download the latest version.

Maybe you are looking for

  • Itunes will not install/upgrade?

    itunes will not install, keeps trying to save to g:/ drive when it does not exist, will not let me change drive?

  • How to Import UDF's by DTW

    Hello All, What's the procedure to Import UDF's by DTW. I want to add UDF's Not UDF's Data. Please Help Regards Hitul

  • MMS Picture Geolocation Sharing?

    I often send and receive pictures with people and add them to my iPhoto library. I've noticed that when I save pictures on my 3GS and upload them to iPhoto that it doesn't recognize the correct time that the picture was actually taken on the sender's

  • Skype application is hanging when I try to call ot...

    You can see in the attached image where the application is hung.I called one number and it was ringing then I tried to call other number without ending this call then the appliation hung

  • Illustrator CS5 Not the Default for EPS and other Vector Formats

    Hey everyone, the issue I'm haveing is not just with Illustrator, but sense I couldnt find a general CS5 forum, and Illustrator was the last CS5 application i noticed this for I'm hoping to find some answers here. So on to the issue.... I have notice