HT4623 my voice call services is not working with cellular network...only works fine with wifi..please help?
my voice call services is not working with cellular network...only works fine with wifi..please help?
Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express.
Similar Messages
-
Camera raw is not updating to 8.6 only the DNG converter is, please help
I have Camera raw 7.1 , it doesn't open Nikon D810 NEF files,
I Downloaded the 7.2 , the 8.3 and 8.6 but the package from Adobe only updates my DNG converter and not my camera raw... I tried and tried, nothing is working. I need to get photoshop and bride to open These files ASAP (I know its in the 8.6) package....
Also the help tab doesn't allow me to update in photoshop !Camera Raw plug-in installer
Found the solution !! -
like 2 weeks ago i called in to att to see how much is the data plan and it would end up costing $30.
so i was like screw that. well they figured that i got a new phone replacing the LG shine. so they asked
for to call this number so they can recieve data which would updated the system that i have a plam treo 750.
ever since this conflict i can't send picture messages. i get that problem. everytime i attempt to send a picture
i recieve this.
- there is a problem connection to the GPRS service in your registered home network.
- then i get a test that says error trying to make data connection. this may be casued by a voice call,
a wired activesync connection or inncorrect network setting.
please someone help me.
btw. hard reset and soft reset did not work for me.
Post relates to: Treo 750 (AT&T)problem fix, i had to call in. customer serivce. and when i called to ask about the plan. they blocked it. so i had to unblock my internet.
Post relates to: Treo 750 (AT&T) -
Not working proper cellular network work only wifi
I Have iPhone 5 my phone not working proper cellular network work only wifi connection we are try will everything but not solve my problem
maheshpl80 wrote:
we are try will everything but not solve my problem
What all of "Everything" have you tried???? -
my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me
After being connected to a charging source overnight try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help
I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.
-
How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?
How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?
-
my photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help
I checked my windows 7 pro machine for the module I see many copies if the DLL with different dates two different sizes all are version 11.0.51106.1 so I guess there are 32bit and 64bit versions. Some are in Adobe folders some in Wacom folders ad in two windows folders including system32. I do not know if there is and entry point "_crtCreateSymbolicLinkW" in it.
-
hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me
Perform a Reset... Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Can i not make or receive calls in ipad mini with cellular network option.?
Can i not make or receive calls in ipad mini with cellular network option.?
You can try Viber Out.
-
My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?
marie274 wrote:
My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?
What exactly happens between the the time the printer was last working well and no on your system? Any updates or upgrades?
Lupunus -
I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRITry this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
HT201210 My Ipod will not work anymore its just the apple showing could you please help me restart
My Ipod will not work anymore its just the apple showing could you please help me restart?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
After i updated my iPhone i realized i do not have my camera anymore how to get it back? I also using a new notebook so I do not have a back up to transfer it from. Please help
I'm assuming you mean you don't have your camera application (which is not saved on any backup anyway).
One way to find it is to get to your home screen, swipe the screen from right to left, and type "Camera" in the search field. Camera is a core Apple app and cannot be deleted, so it must be there somewhere.
An alternate approach is to do Settings > General > Reset > Reset Home Screen Layout -
My daughter forgot her passcode for her 3GS, and iTunes will not let me change the passcode or even update. Please help!!!
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.
Maybe you are looking for
-
I am having constant problems sending iMessages
I am fed up that I updated my software to iOS 7 and since then cannot send imessgaes... Come on Apple..SORT IT OUT!!! I have read online that this is a bug you need to fix, however in the mean time it is racking up my bill for me to send them as text
-
Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]
Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV] When I connect the phone he load and then says no connect
-
How do I merge transfered files from a PC to my new Mac
I recently transfered files from a PC to my Mac but they did not merge with the existing Mac files but ended in a different location under a separate password access. How do I merge these new files with the existing Mac files?
-
How do I recover my iTunes music library from an external backup?
The bad news: my iMac G5 died with my iTunes library on it. The good news: it was backed up to an external hard drive. I'm not going to fix the iMac, so I need to retrieve the backup and put it on my MacBook. How do I import from the external driv
-
PLD - Company Details on PO's, Sales Orders, etc. printing blank space
Hello, I am onsite at a client and I am designing the print layout of all their marketing documents. In the company details section, their is a field called "Block"... This is left blank because I have nothing to put there. Because this field is blan