HT4623 need to restore now after updating

I updated my iphone 4 to the new ios 6 last night. Now my phone is saying It needs to Restore but it won't let me do anything. It shows the Plug into itunes screen and won't let me do anything on it.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Similar Messages

HT4623 Help with restoreing phone after update to software

I followed instructions to update my iPhone 4 software to version 7.0.3., including first backing up the phone to iTunes. Once software update was downloaded, I followed instructions to restore everything from iTunes and according to the message on my phone - it was restoring. However, when it appears to be completeI cannot use my phone, it continuously asks me to set up my phone and back to the message about restoring from iTunes. Not sure what to do now - any suggestions?

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

Ive backed up my phone and restored it after updating the software and now a lot of my apps have waiting next to them and i cant access them from the interface

Ive backed up my phone and restored it after updating the software and now a lot of my apps are greyed out and i cant access them via the phone interface
I can only access them via the App store

I did plug it into itunes and then backed it up to the cloud (im actually wondering if thats my problem)
then restored it from the cloud.
Maybe I should restore it from the computer (when its plugged into itunes?)
thanks sberman

HT4623 My ipad mini went to restore mode after updating. when i try to restore downloading software gives error

My ipad mini went to restore mode after updating. when i try to restore downloading software gives error

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Back up & restore issue after updating to 4.3

Before updating my SP from 4.1 to JB 4.3 I made a backup using tool "Back up & restore" on SD card. But now after updating to JB 4.3 I'm unable to restore that backup. It says "Cannot restore, Selected backup records cannot be used due to incompatible software versions. Please select a more recent backup file".Is there any way resolve this? I need to restore my old Contacts, I don't care about rest of the data.

It's unvelibable!If Sony provides a Backup & Restore tool, it is intended to do exactly as expected: backups that can be restored.
I made backups to be sure all my valueable data is not lost.Now my mobile has been stolen :-(Don't worry, I think, I have a backup of all important data.Nooo!! Say Sony's tool: you have a different version of Android now, so you CAN NOT restore any data.And say: updates the old phone (the stolen one), and make a NEW backup. Ok, it is not admisible! You must provide a tool that can restore data without (impossible) conditions. This is not a tool, this is a secure way of throw away all of your important data!! I'm very angry! This contacts are not my friends, are business contacts and I'm loosing money because of that >:-(

My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad

My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.

Same issue here too. I will try reinstalling the firmware update. This has happend to me twice. The only way to correct the issue was to reboot.
Thanks!

Iam unable to restore backup after updating ios

Hello friends iam unable to restore backup after updating ios to 6.1.3.plz help me how to restore backup iphone 4

Did you already try to connect in recovy mode and restore, as explained in this article?
http://support.apple.com/kb/HT1808

Do I need to uninstall PSE9 after updating to PSE13?

Do I need to uninstall PSE9 after updating to PSE13?

It is not a requirement but you can if you wish to.

Unable to restore backup after updating iphone 4, because "not enough free space"

I updated my iphone 4 to v7 via itunes (v12), and in doing so, my camera roll was erased as were most of my calendar events. I am trying to restore the backup that I created just before updating, but I get an error message in itunes that says "itunes could not restore the iphone" because "not enough free space". There is 2.5gb free on my iphone, and I created the backup just before updating so there should be plenty of room. Does anyone know how to get the iphone to restore and/or how to put my pics & calendar back? itunes hangs up at the end while syncing too...

hello again, don't post twice the same question, it won't be answered faster.
see your previous thread: iphone 4 unable to restore backup after updating to v7

Unable to restore 4s after updating software

unable to restore 4s after updating software , the wake up screen is nonresponsive

Hi D.Cohen
Thanks 4 ur attention , I did exactly what u told several times , the restoring ( updating ) starting , after some times , there is a message appears to ask for allowing pc to access iphone data , followed by another one telling to give answer via iphone ( which is still unresponsive ).
After downloading completed , I got another message , telling that there is an error occurred and asking to try again . ( each trial take around 1-2 hours )
pls advise
0

What is thr password used to restore phone after update

what is the password use to restore phone after update?

Please continue the thread you already started instead of making a new one please

Ipod touch stuck in restore mod after update

hi i have windows 8 release preview. i tried to update my 8gb ipod touch 4th gen and not its stuck in restore mod loop. but i have a 32gb ipod touch 4th gen that sync's to itunes just fine. ive tried the home and lock button, RecBoot to push it out of restore mod, iRecovery to push it out of restore mod and nothing works. i keep getting error 1603 and 1611. it comes up on itunes and says it needs to be restored. please help

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Also, it could be due to an incompatiblity with iTunes and the pre-release Windows 8 version.

P35 Neo2 - OS died, need help restoring RAID after re-install of XP

I have a P35 Neo2 with on-board Intel RAID. I need a bit of help getting a two drive RAID going again after reinstalling XP.
Here's my situation:
Same hardware, MB, etc. I originally set up the system with a 20gb IDE and two 320gb SATA drives. I put the OS on the 20gb, and set the two 320's up as a RAID. I partitioned the 320's into 200gb + 120gb sections on each drive. The 200gb partitions were mirrored between the two drives, and the remaining 120gb on each drive was used as non-RAID storage space.
I picked up a nasty virus-spyware a month or two ago that I was struggling to find a fix for when the OS began to BSOD. I put the 20gb IDE to the side, and put a 40gb IDE in it's place. I re-installed XP on it last night, and now need to get the RAID up and running again.
I went into Disk Management and it showed three dynamic drives with a yellow triangle icon and labeled 'foreign'. I right clicked and found an option to 'import'. I clicked on import and a window popped up showing all of the partitions and logical drives I had previously created on the two drive RAID. I figured I was in business, so I clicked OK.
Disk Management now shows one dynamic disk as 'Online', but still shows two as 'Foreign'. If I right click on them, and chose import, I get the same window showing my partitions and logical drives, but if I click OK, I get a warning message that: "Some of the volumes you are importing will lose data because you have not moved all of your disks to the system."
I'm in over my head at this point, so any help would be appreciated.
Thanks,
GeoD

A 200gb partition is restored, but the 120gb is not, which is confusing. ALso, when I look at the logical drives in the partition, I'm beginning to think I had the 200gb mirror /120 gb storage backwards. The data restored is not something I would be concerned with losing. It's installed applications, and multimedia files that I could lose without worry.
There is also 70gb dynamic drive labeled Missing. I know I left a small portion of all three of the drives unallocated as a reserve, so that must be what this is. It's like the RAID info is incomplete which leads me to the next piece of info.
Something I didn't initially mention for the sake of brevity, was when I right-clicked on 'Import Disk' the applet noted the disk was 3/3. I assumed that meant disk 3 of 3 disks. I've since begun to wonder if I imported the disks in the wrong order. ie) I should have imported disk 1/3 first.
Do you know how to clear out Disk Mgt's info, so I can start over?
I also noticed only one of the 320 SATA's shows up in Device Mgr, (DM). What I found both confused me and encouraged me.
When I created the array, I named the the drives RAID0 and RAID1. They both show up in DM. But only one of them shows up as the drive model: WDC WD3201ABYS-01B9A0. There should be two of them.
The OS knows there should be a RAID, but for some reason only one of the drives show up as hardware. I rebooted and checked the data and power supply cables, (connected), the BIOS, (both drives show up) and both drives show up in Disk Mgt. Just not in DM.
Does that mean the HD has died?
Part of my difficulty is I had a brain injury in 2001, followed by another in 2003. The 2nd injury caused 6 months of what the docs call it a walking coma - I walked and talked, but have no memory of the time.
When I 'woke up' in the Fall of 2003, I found I had lost considerable cognitive function and other problems. These problem have ended up disabling me, (I'm now on SS Disability).
Until then I had been a 'System Admin' for micro-businesses, (max - 15 computers). I built systems and servers, installed networks, maintained them and did all the support. Basically I was these company's Sys Admin on an as-needed basis.
One thing I lost was the ability to troubleshoot and repair hardware. Combined with other cognitive problems, I was forced into closing my business. At the time, I was maintaining close to fifty offices; ~20 had Peer-to-Peer networks & ~20 had servers I had built.
What's doubly frustrating is I was just getting ready to sign up with an online backup service when I got hit with a nasty malware/virus that's so new there's no info on the 'net about it. I got entangled in trying to fix it and spaced out the online back up. Now I find myself in a situation where I desperately need to restore the data on these RAID drives. Because of the memory problems I now have, I completely depend on my computer as an auxiliary 'brain' - I have stuff on these drives that I have to have.
I didn't do much with RAID when I was still in the biz, and this is the first time I've had problems with a RAID of my own, so I'm struggling to figure this stuff out.
Should I be able to install one of these drives by itself so I can get the data from it? The way I understand the theory of RAID is that if one drive dies, you can put another in and the mirrored portion will re-create itself on the new drive. Couldn't that be a way to get the important data off the drive or drives if they don't want to go back together as a RAID?
I could back each up to the online service and then just rebuild them. Not my first choice, but it would reduce my stress level if I thought I could do it.
Sorry to go on, but now you can see why I'm both struggling & worried.
Thanks for any info or help.
Later,
GeoD

HT4623 Phone does not work after update

After update 6.1.4 phone cannot find signal to function even though wireless works. Cannot reload update...says it's up to date. Reboot nothing, Reset, nothing. Really beginning to dislike this piece of junk. Just need a phone that works.

Remove sim and insert it again.
Did you restore form backup or restore as new?

My phone does not want to come on pass the 'connect to itunes' logo. I have a iphone 3Gs. It happened after I tried to restore it after updating it through itunes on my computer.

My phone does not want to come on pass the 'connect to itunes' logo on the screen. This happened after I was updating the phone software through itunes, and itunes said I needed to restore my phone if it is to work with itunes, which I did. An error (1015) box popped up and... well.... here we are. I have an iphone 3G. The support coverage is expired.
I just want to return to my phone functioning as before.

Was this iPhone jailbroken?

HT4623 need to restore now after updating

Similar Messages

Maybe you are looking for