HT4623 No longer can mirror with my ipad since last update.

No longer can mirror with my ipad to apple tv since last update

Check the following before you send it in.
Setup Apple TV with iPad
1. Setup Apple TV
(a) Connect cables and power cord
(b) Turn on TV and select Input
(c) Configure Apple TV e.g. Language, network
2. Setup Home Sharing on iPad
Settings>Music/Video>Home Sharing
3. Setup Home Sharing on Apple TV
Settings>Computer>Turn on Home Sharing. Enter Apple ID and Password
4. Pair Apple TV with Remote Control
General>Remotes>Pair Apple Remote
To AirPlay video or photo content to your Apple TV
1. Connect your iOS device and Apple TV to the same Wi-Fi network.
2. Open the Videos, Safari or Photos app on your device.
3. Locate and tap the AirPlay icon on screen or Control Center.
4. Select your Apple TV from the list of available devices that appears and begin playback.
Note: Item 1 is very important

Similar Messages

  • I can no longer email pages document from my ipad since last update. they sit in outbox

    I am no longer able to email documents created using "Pages" from my ipad. All emails sent within pages go to my out box and sit there with a big yellow exclamation mark next to them. This has only recently started happenning, since the last time I updated "Pages". Has anyone else had similar problem?

    Hi tikijack,
    Thanks for visiting Apple Support Communities.
    If email messages with Pages attachments are not sending from your iPad, start with the troubleshooting tips in this article:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Cheers,
    Jeremy

  • Has anyone else had trouble with there front facing camera on Ipad with Retina display since last update?

    Since the most recent update for IOS 7.1.1 my front facing camera has not been working and the tech people say it is a hardware issue.  Anyone else out there have the same issue?

    RobertDHarding wrote:
    At this point you probably think the errors are SyncPX's fault. 
    And you would be right.
    I started by taking the fault up with SyncPX's developer, Qdea.  One other user had noted a fault similar to (2).  Qdea maintain that there's nothing wrong with their code, and blame Apple's disc drivers.
    What steps can I take to pin this down further?  All advice and comments will be gratefully received..
    Dump Qdea for someone who knows how to write Mac software.
    1. Qdea displays the following logo: . This is a pre-MacOS X logo.
    2. Qdea displays the following review:
    MacFixit had a good reputation, if you are old enough to remember when it used to exist.
    3. Qdea provides download links to SynchronizeX and version in French, German, and Japanese. Apparently they don't know that Mac software can be localized into a single executable.
    I'm sure there are any number of similar utilities available, all of them cheaper than SynchronizeX's $99.99 price.

  • ITunes With Windows 7 64 Bit Doesn't Access Ipad Since Last Update

    I'm assuming Apple has figured this out by now - but at least on my pc - to plug in my Ipad and make it work I have to stop the apple mobile device service (itunes is locked up otherwise) and then go to devices and reinstall the apple usb driver from C:\program files\common files\apple - which is pretty strange since the rest of the itunes software is in the program(x386) directory... I'm guessing someone had a blonde moment and installed part of the program to the wrong directory - but once I do that (and I had to do it again just now after the Ipad update) it works just fine. Just wanted to know if anyone else had the issue or if it was just me...

    I'm having a similar problem - my computer tells me that "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it". I'm also using Windows 7 64bit.

  • Fn Keys or Hotkeys not working on T61 with Windows XP since last update

    System: T61 7662 CTO, Windows XP
    It's been a few months now and there's no new update to solve my problem. I have looked around the forum. I have found similar problems but not exactly the same problem.
    Ever since the last patch of update, the "ThinkVantage" key and most of the Fn Keys don't work. The non-functional Fn-keys include "Fn+F2, F3, F5, F7, F8, F9." The funny thing about Fn+F7 is that the screen flashes, but the normal display choices are not shown, and it goes back to normal display.
    On the contrary, the volume and brightness keys are functional and are properly displayed. Also, Fn+F4 (sleep) and wake-up by Fn+Enter works. Fn+Space (magnification) works too.
    I've also tried other successful solutions from other cases in this forum, but they all failed in my case. These includes:
    updating to the newest drivers
    Installing Lenovo System Interface Driver
    uninstalling and reinstalling in some kind of sequence
    Reverting the Hotkey back to the previous driver
    Thanks.

    I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
    eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity  deblocking the sound volume!!!!!!!!!!!! and I don't need more functions 
    volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
    and now I don't know worked this bustered sound driver in winxp x64.
    ThinkPad T61 7664

  • Is anyone else having problems with battery usage since last update?

    since doing last iOS update on my 6 battery now only charges to 85%. Anyone having issues?

    For me, it has battery drain since updating. Before I went to bed last night I charged the phone to 100%. When I woke up this morning, it was sitting at 81%.

  • Can't open itunes anylonger since last update ..

    it just opens a window saying that itunes is either on a HDD where I don't have access (as admin!!) or I don't have writing issues for the folder ...what to do?
    I tried uninstall, re install, removing Bonjour, installing an older version and so on ... absolutely nothing helped so far ..

    Hello kitty005,
    You may need to hold Shift on your keyboard while opening iTunes in order to direct it to the correct iTunes Library.
    iTunes: How to open an alternate iTunes Library file or create a new one
    http://support.apple.com/kb/HT1589
    Cheers,
    Allen

  • Why can I no longer use AirPlay with my Slingbox?  New updates break complatibility?

    Why can I no longer use AirPlay with my Slingbox?  New updates break complatibility?

    You already seem to know what the issue is, it is the parallax feature that was added to iOS 7.  From your rant, it appears that your attempt to work around this was not successful.  According to the Apple documents I've seen, they recommend that you enlarge your image (not reduce it).  Make your image have excess space on all sides, which is not displayed on the screen.  This way, when you tilt your device one direction or another, it can shift the image to give the appearance of 3D. 
    As a photographer, I like to use the full frame of my images, but I also know that I need to leave room around the image as well.  I have some photos I have taken that I can't use because I have them cropped too tightly too, but I have others that work just fine.  Just remember that part of the image file is "off screen" so that if iOS has to shift the image up it has some image that can scroll onto the screen.  It needs this space on all sdes, so just make youre images larger, and keep in mind that a portion on each side will be outside the normally visible screen...  If you don't like this feature, you can always go into the settigns and turn it off.

  • IMAC mirroring is not working with my IMAC and Apple TV since last update

    Hi friends,
    since last update I am facing problems with my IMAC and airplay via apple tv to my HD TV screen. It is not working. Only audio but not video. I believe it has something to do with IMAC mirroring, which is not possible to select only expanded desktop. Airply on my TV is working with my IPAD, so it should be a problem with my IMAC only.
    Did someone of You make the same experience or know what to do?
    Thanx in advance

    Hello, H1Daisensei. 
    Thank you for visiting Apple Support Communities. 
    Here is an article that you may find helpful when experiencing this issue. 
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/ht5404
    Cheers,
    Jason H. 

  • Trouble with Reminders on iPad since iOS7 update

    Reminders keeps dropping items and giving me duplicates on my iPad since iOS7 update.  Any ideas?

    This is the sign of an application crash.  If you don't have the "send diagnostics" enabled, you might want to enable that so that Apple will get your crash reports for Reminders.  If they don't get any crash reports, they csn only assume that it is working properly.
    Now, from what I have seen, the only people who are reporting problems with Reminders are people who use it very heavily.  I use it for about one or two remindrs a week, and I have a few monthly remonders for me to give my dogs their medications.  I don't see any issues with it working properly on my iPhone 4, iPhone 5, or iPad 2.  My guess would be that it is an application issue that is only seen under heavy load/usage (possibky a memory leak).  I know I can cause problems in the mail app, but then again, I have about 30 email accounts setup on my iPad 2 and iPhone 5 (I use different email accounts at different sites so I know exactly who sells/leaks my email information out).  I am an email user more like you are a reminders user, and I have my diagnostic data enabled so that Apple knows about my email crashes so they can improve it for everyone.

  • Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

    Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

    It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
    And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

  • HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating no with out name pls what is the solution

    HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating number  with out name pls what is the solution

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • I have problems with sync ibooks from iTunes to my iPad since i update to ios7

    i have problems with sync ibooks from iTunes to my iPad since i update to ios7

    first you plug your device into your computer, then you select the name of your device on the left side of itunes. then you select 'apps' from the top center of the itunes window, and you check the apps that you want to go from the computer to the device
    once you've done that, you press the 'apply' button in the lower right corner
    this will be the same for anything you want to go from the computer to the device
    you'll select the appropriate tab at the top, then only check information you want to go from the computer the device and then hit 'apply'

  • Since last update for iOS can't open PDF file in iPhone 5

    Since last update on PDF can't open PDF file on iOS.
    MSG says that PDF file I'm trying to open is not a valid PDF file but I can open
    It on iPad. Any explanations please ?

    If you can share this PDF with us at [email protected], we can take a look, and see if there's a bug in Reader for iOS that is preventing us from opening it.

  • Has anyone else been having trouble with safari ever since the update? I have restarted several times,mans it still doesn't work.

    Has anyone else been having trouble with safari ever since the update? I have restarted several times, it still doesn't work.

    Greetings Blueleoapple,
    After reading your post, it sounds like you are experiencing an error with Safari. You may want to consider resetting your device, which is different from restarting. This article provides detailed instructions for Restarting, and Reseting:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    How to restart
    Press and hold the Sleep/Wake button until the red slider appears.
    Drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    How to reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

Maybe you are looking for

  • Acrobat 9 crashes Windows XP

    I've used Acrobat 9 for a few years with no problem.  But recently, reading a standalone PDF file crashes Windows XP.  If I try to create a PDF file, Windows XP crashes.  If I try to uninstall Acrobat 9, XP crashes.  But...I can view PDF files in Int

  • Importing Text Files  into Notes

    Having trouble reading imported text. I have IPod nano 3rd gen. It is checked to enable disc use. When I drop a .txt file into notes folder, then eject IPod, I can see the document titles in IPod/notes however, text displays as code (alot of 0's &1's

  • Can't have ASM mark a NFS file as an ASM disk : -is not a block device

    Hello, I'm trying to experiment with ASM for learning purpose. Because I don't have access to a SAN, I am trying to use NFS files but I can't manage to have ASM mark those files as ASM disks. [root@localhost /]# /etc/init.d/oracleasm createdisk ASM_D

  • HT201060 When I sync it wants to remove my library of previously purchased items?

    Here's the back story, my HP laptop bit the dust. So I got a MacBook Pro(LOVE IT!) Here's the issue at hand When I go to sync my iPhone 5 and transfer some larger files to save space, it's trying to say to sync it up it'll remove my library of purcha

  • [Solved]Messed up my USB

    Hello, I've been messing around with my usb, trying to make a live usb with debian on it. I used the dd command in the terminal. After multiple failures I just gave up, and I want the usb back to normal. I tried fixing it whit the KDE partition manag