HT4623 Numbers not working?
When I call automated phone systems they are not recognizing when I'm pushing numbers.. For example if I call 800 number and it says choose option 1 for English, it will not recognize I'm hitting a number!! I have tried several different numbers! Just FYI it's texting and dialing with no problems! Help!
Reset the device by pressing and holding the home and power buttons until the white Apple logo appears.
Similar Messages
-
So I've been having problems with my keyboard on my MBP 15-inch, Early 2011 (OS version 10.7.5, fully updated). It stops working after I use Photoshop or InDesign (cs6) for a long period of time or when I'm surfing the web a lot. The best example where it for sure stops working when surfing the web is when I'm on tumblr and I scroll through dozen of pages on my feed. When it stops working, the only keys that continue to work is everything but the numerals and letters.
I've taken it in, replaced the keyboard and talked to apple support and they can't figure it out. I assumed that it stops working because of all the loading images, info and memory that is in use when applcations are open but I don't know if it's because of memory.
One thing that always occurs right before the keyboard stops working is this sound from the speakers that sounds like gears turning three times or three fast ticks. Only once has the letters and numbers start working and I don't now what I did to make it come back but I heard the three ticks play again.
But my only solution to make it start again is restarting the computer.
Does anybody have this problem/know the solution to make this stop?The only Upperfilters and Lowerfilters you were supposed to remove were the ones in 4D36E965 which is for the Optical Drive.
The other keys, for example 4D36E966 and 4D36E967 etc.. are for other devices, such as the keyboard, mouse, and possibly other devices like sound and graphics. This is not good, because its hard to manually restore those filters without knowing what was in there before you deleted them.
Did you backup the registry before deleting the keys?
You could try a System Restore to restore the registry back to a previous state. If you boot into Safe Mode (press F8 or F5 before XP boots up), you can select a previous date to restore back to.
Then follow these instructions http://support.microsoft.com/default.aspx?id=314060 -
Numbers will not work on my iPads
iPad mini v1 and ipad2
Latest versions: uninstalled and reinstalled
iCloud on
Reset settings
Can anyone help?Hi Simon,
I have used Numbers on iPad for a few years now with no problems at all.
It starts up. Then takes me through the introductory pages of a new installation.
I want to get started
I Press use iCloud then it just quits.
Subsequently it does not even get that far.
So ... welcome to numbers ... continue .. slides to next page ...flash of the screen then the home screen.
Pages is fine, Keynote is fine, all other iCloud functionality fine
All software latest versions ie 7.0.4
Cheers
Colin -
New aluminum keyboard for 24" iMac-10-key numbers not working??
I've got a new 24" intel aluminum iMac I've only had for 2 weeks.
Just today, the 10-key number pad stopped working & my programs froze up with no response from the might mouse plugged into the USB port on the keyboard.
The keyboard viewer shows all of the keys being recognized & Apple Hardware Test showed no issues.
I re-booted several times, did a permission repair & ran MacJanitor & when I rebooted again, I don't get any freeze-ups so far, but I do not have the function of the 10-key portion of my new aluminum iMac keyboard.
Very strange, but it does seem to be software related.
Something of interest: Only the 789-456+1230.enter keys are not working. Those above the 789 are working fine.
And to re-iterate, the keys are all being recognized by the keyboard viewer onscreen.
Any help would be greatly appreciated.
daveI didn't end up taking it in - I created a new user account & there were no problems with my keyboard.
I transferred my home folder to the new account & started basically fresh.
I guess my old user account was corrupted or messed up somehow.
I have done this once before on my 1book g4 laptop & it also worked.
Thanks for the suggestion, I was getting ready to pack it up for a trip to the Apple Store & remembered to try this at the last minute!
Thanks again
dave -
Why does the app vorlagen fuer numbers not work after ios7 update
After ios7 update the app vorlagen fuer numbers won't open anymore, but vorlagen fuer numbers 2 works.
I have been unable to find any app that works with Numbers on IOS7. I can still read them on IOS 6.1.3 with an iTouch.
Numbers on IOS devices still works. -
I updated my phone yesterday with the new IS06.
Since then - I have been unable to get my sky e mails on my phone.
I have checked the settings but it still will not work.
Any ideas?Try this:
Go to Settings > General > Reset > Reset Network Settings
See if you are able to connect now. -
just assigned a new passcode to my ne ipad mini...logged off and now the passcode will not work so i can enter the ipad. what do i need to do to get into it?
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
Sound stopped working. Checked settings but not sure how to reset sound or troubleshoot. Any help is appreciated.
There are several different things that you can check, and those things are dependent on which sounds are not working.
1. If you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
3. If you still have no sound at all ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol. -
Hi
I just updated my ipad and now have Siri but it is not working any suggestionsIdentifying iPad models
http://support.apple.com/kb/HT5452?viewlocale=en_US&locale=en_US
Cheers, Tom -
My imessage is not working since a week. Apple blames Telstra and Telstra blames Apple. either way , I am unable to be in contact with others. in some case it appears not delivered, in others it send as a text, I may recieve delayed messages of up to 24 hours. Not happy. Apple has not provided me with the next steps...just wait...until when???
ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367 -
my ringer is not working and i need somebody to held me thanks
Is the silent switch on the side of the iphone on?
-
My iPhone 5 power button is not working!
Before it goes 100% not functioning at the "power button", I have to hit it at the right-side of the button.
So now I'm unable to make use of the power button, how should claim from you, I believe it's still under warranty!
My iPhone 5 (White) Serial number = F2LJN9PKF39D
Kindly let me know as soon possible.Try this:
Calibrate Home Button
1. Open a stock application like Calendar, Weather or Youtube
2. Hold down the power button until the "slide to power off" control appears
3. As soon as you see it, press the Home button and keep it pressed until the red slider disappears and the app is forced quit to the Home menu -
Ipsec sequence numbers not working for multi VPN's
one site to one site VPN works no problem, but when I add the second peer in the hub router it does not connect. There is no routing in place all routers are connected to the same switch and with no crypto map they can both ping 192.168.2.1. With crypto map only 192.168.2.2 can ping 192.168.2.1. I am at a loss as to what I am doing wrong this seems simple I just add the entry to Test with a different number, but it will not work.
Please ask any other question you can think of. I followed the same commands on both spoke routers so it seem like it would be in the hub router, but it has me beat as to why.
Thanks for the help.
Hub router:
r1#sh crypto map
Crypto Map Test 1 ipsec-isakmp
Peer = 192.168.2.2
Extended IP access list 110
access-list 110 permit ip any any
Current peer: 192.168.2.2
Security association lifetime: 4608000 kilobytes/86400 seconds
PFS (Y/N): N
Transform sets={
Test,
Interfaces using crypto map Test:
FastEthernet0/0
Crypto Map Test 2 ipsec-isakmp
Peer = 192.168.2.3
Extended IP access list 110
access-list 110 permit ip any any
Current peer: 192.168.2.3
Security association lifetime: 4608000 kilobytes/86400 seconds
PFS (Y/N): N
Transform sets={
Test,
Interfaces using crypto map Test:
FastEthernet0/0
r2#sh crypto map
Crypto Map Test 1 ipsec-isakmp
Peer = 192.168.2.1
Extended IP access list 110
access-list 110 permit ip any any
Current peer: 192.168.2.1
Security association lifetime: 4608000 kilobytes/86400 seconds
PFS (Y/N): N
Transform sets={
Test,
Interfaces using crypto map Test:
FastEthernet0/0
r3#sh crypto map
Crypto Map Test 1 ipsec-isakmp
Peer = 192.168.2.1
Extended IP access list 110
access-list 110 permit ip any any
Current peer: 192.168.2.1
Security association lifetime: 4608000 kilobytes/86400 seconds
PFS (Y/N): N
Transform sets={
Test,
Interfaces using crypto map Test:
FastEthernet0/0Ok I cannot ping anything now. Can you see any other obvious problems? Seems like I should be close and must be missing something simple.
Thanks for the help by the way.
hostname r1
crypto isakmp policy 9
authentication pre-share
crypto isakmp key Test1234 address 192.168.2.2
crypto isakmp key Test1234 address 192.168.2.3
crypto ipsec security-association lifetime seconds 86400
crypto ipsec transform-set Test esp-3des esp-sha-hmac
crypto map Test 1 ipsec-isakmp
set peer 192.168.2.2
set security-association lifetime seconds 86400
set transform-set Test
match address 110
crypto map Test 2 ipsec-isakmp
set peer 192.168.2.3
set security-association lifetime seconds 86400
set transform-set Test
match address 111
spanning-tree mode pvst
interface FastEthernet0/0
ip address 192.168.2.1 255.255.255.0
duplex auto
speed auto
crypto map Test
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
interface Vlan1
no ip address
shutdown
ip classless
access-list 111 permit ip host 192.168.2.1 host 192.168.2.3
access-list 110 permit ip host 192.168.2.1 host 192.168.2.2
line con 0
line vty 0 4
login
end
hostname r2
crypto isakmp policy 9
authentication pre-share
crypto isakmp key Test1234 address 192.168.2.1
crypto ipsec security-association lifetime seconds 86400
crypto ipsec transform-set Test esp-3des esp-sha-hmac
crypto map Test 1 ipsec-isakmp
set peer 192.168.2.1
set security-association lifetime seconds 86400
set transform-set Test
match address 110
spanning-tree mode pvst
interface FastEthernet0/0
ip address 192.168.2.2 255.255.255.0
duplex auto
speed auto
crypto map Test
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
interface Vlan1
no ip address
shutdown
ip classless
access-list 110 permit ip host 192.168.2.2 host 192.168.2.1
line con 0
line vty 0 4
login
end
hostname r2
crypto isakmp policy 9
authentication pre-share
crypto isakmp key Test1234 address 192.168.2.1
crypto ipsec security-association lifetime seconds 86400
crypto ipsec transform-set Test esp-3des esp-sha-hmac
crypto map Test 1 ipsec-isakmp
set peer 192.168.2.1
set security-association lifetime seconds 86400
set transform-set Test
match address 110
spanning-tree mode pvst
interface FastEthernet0/0
ip address 192.168.2.2 255.255.255.0
duplex auto
speed auto
crypto map Test
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
interface Vlan1
no ip address
shutdown
ip classless
access-list 110 permit ip host 192.168.2.2 host 192.168.2.1
line con 0
line vty 0 4
login
end -
HT4623 phones not working after ios6 install
ive tried to update my phone to ios6 and it all went through then my phone displayed plug into itunes done that and its not working it comes up on screen with apple logo and the bar at the bottom processes for 2 mins then turns off and back through the whole situation again.
Try putting your iPhone in restore mode. To do so you have to connect your iPhone to your mac via usb. Then press and hold the power and the home button at the same time. Now when the apple logo appears release only the power button, but keep on holding the home button until the iTunes logo with the usb cabel appears on your display.
iTunes should now recognize your iPhone in restore mode and you can safely restore your iPhone to factory settings. -
N96 v30.033 numbers not working
hello
im having a problem with my n96 now on v30.33 firmware. this is the second phone that has developed the same fault
it is on vodafone and should be running version 12.xxxx but for totally ovbious reasons i have changed the product code
on both phones the upgrade went ok, but then after a few days the keys have got messed up. number 3,0, 9, red, camera(2ndclick) have just stopped working
this is ovbious a software fault, the 2nd n96 is only 2weeks old.
any ideas (nokia wont accept it as they know i have changed the code as i found out the first time as it shows on there screen the code you used everytime you update via nokia software updater)
thanks alot, this is driving me madsince you voided your warranty here is the only things i can suggest for you to do short of taking it in and having to pay nokia care to fix your phone
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
also you can try to reinstall your firmware again and then reformat your phone and see how this goes
Message Edited by radical24 on 16-Aug-2009 09:45 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....
Maybe you are looking for
-
Mid-2013 13" MBA w/1.7 GHz Intel Core i7 running Yosemite. ScanSnap auto update ran this evening (02 Nov 14) and upgraded my ScanSnap manager to version 6.3 L23. Immediately after the update the OS started making different open windows (Safari, Fin
-
How to tranfert music from an ipod to my computer?
I want to transfert songs from my friend's ipod to my computer's itune. He is jut visiting me so it's a little be urgent. I'll be glad if somebody could help me Thanks for your consideration
-
How to intersect with any sprite of a certain cast member?
Hi. I am trying to script a simple 2d platformer engine for a larger University project. I have movement sorted with W and A and gravity. I can get collision detection with the floor by doing if sprite 1 intersects sprite 2 then gvGrav = 0 end i
-
Preview's Funny Ideas of Image Display
I have a strange issue with Preview that I cannot find a setting or preference to define. I have migrated a large number of graphics from my old-and-busted Windows machine to my new-hotness MacBook Pro. Some of these are forum icons which are general
-
Crystal Reports Plugin Issue with MyEclipse Blue 8.6
Dear All, I am trying to integrate Crystal Reports Plugin with MyEclipse Blue 8.6 As i add the update site and i say Apply Changes to Profile, it calculates the requirements and in the middle hangs. Please advice, is this version not compatible with