HT4623 Option to update to iOS 7.0 not available

I am trying to update my iphone 3GS to the iOS 7.0.  It currently is on the iOS 6.1.6.  It keeps saying my software is up-to-date and that no updates are available.  I tried to do this via iTunes and wirelessle.  Is the phone too old to support the iOS 7.0?

iPhone 3gs does not support iOS 7. The latest iOS you can upgrade to on your iphone 3gs is 6.1.6 . Apple will not release the ios7 for the iphone 3gs. Sorry
Hope I helped.
Donnie.

Similar Messages

  • Doesn´t appear Personal Hotspot option after updating to iOS 8?

    Doesn´t appear Personal Hotspot option after updating to iOS 8?

    I Had the same challenge and all I did was switch off my iPad. Remove the SIM card from the tray. Switch the iPad back on again, reinsert the SIM card and bingo! The hotspot showed up again.

  • HT4623 i have done update my IOS, but is not activate yet... i have had try so many time but always fail..i dunno what method supposed i do..please help me to solve this prob. tq

    i have done update my IOS, but is not activate yet... i have had try so many time but always fail..i dunno what method supposed i do..please help me to solve this prob. tq

    You can't if your iPhone was hacked/jailbroken to unlock.

  • IOS 4.3 not available

    The iOS 4.3 Software Update page says “Updating is easy. Just connect your device to your Mac or PC and follow the onscreen instructions in iTunes.” When I do this, on 10.6.6 running iTunes 10.2.1 (installed and reïnstalled multiple times), I am told when I connect my fourth generation iPod Touch that “This version of the iPod software (4.2.1) is the current version.” There is no option to update to iOS 4.3. I have tried to download the .ipsw file directly (iPod4,14.3_8F190Restore.ipsw) and option-clicked on the “Check for updates button”, but when I do, I am told that “The iPod ‘Victor Maurice Faubert’s iPod’ could not be updated because the firmware file is not compatible.” How do I proceed so that I can get iOS 4.3 installed on the device? The iPod runs fine under 4.2.1, but I would like to upgrade to 4.3 to take advantage of its new features. Thank you.

    Are you sure you which generation this is?
    If you have an 8GB model then it could be an older 2nd generation model and you cannot upgrade to 4.3....
    Did you buy it new or used?
    If you bought it new and it is the 4th generation, then it sounds like something is wrong with it and you need to return it.
    Look on the back of your iPod Touch for one of these numbers.
    These come directly from Apple.
    iPod Touch 1st generation - A1213
    iPod Touch 2nd generation - A1288
    iPod Touch 3rd generation - A1318
    iPod Touch 4th generation - A1367
    I am guessing that the number on the back of your iPod Touch is A1288 which would be a 2nd generation model and that is why it is telling you that you have the current 4.2.1 iOS version.
    Also see this Apple document for numbers.
    http://support.apple.com/kb/HT1353#iPodtouchlate2009
    Let us know what you have.

  • HT4972 I have had an iphone 3g and recently had to restore my factory settings, when I have tried to add facebook on again it says that the relevant update of 4.3 is not available, however the 4.3 update is not available for the iphone 3g. how can i solve

    I have had an iphone 3g and recently had to restore my factory settings, when I have tried to add facebook on again it says that the relevant update of 4.3 is not available, however the 4.3 update is not available for the iphone 3g. how can i solve this and get facebook back on my phone

    You cannot.
    Unless you have done as you should and have the old facebook app on your computer. 

  • Why ios 7 is not available on itunes ?

    why ios 7 is not available on itunes ?

    thx 4 quick reply i have 1 more question if apple wontrelease ios 7 then what is ios 7 beta ?
    Message was edited by: zohaib

  • HT5312 option to reset my security question is not available for me.

    The option to reset my security questions in not available for me, please fix, thank you.

    You need to contact Apple, either through the link in that article or by phoning them.
    (79401)

  • HT4623 i am updating to ios 6.1 but i dont want immediatly i have shut down my iphone by holding sleep wake button and home button and cracks from that time and its not restarting

    i am updating to ios 6.1 but i dont want immediatly i have shut down my iphone by holding sleep wake button and home button and cracks from that time and its not restarting

    HarryAustralia wrote:
    I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
    The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
    That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
    You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
    Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

  • HT4623 I recently update the iOS system on my iPhone 5 and my music is no longer showing.  The musis show in my library on the computer.  Anybody got a quick fix?

    Recently update my iOS system to 7.1 and all my music has disappered. It is still in my library, but my phone will not syc with it as far as I can tell. Any quick solutions?

    Sync the device to the computer.

  • HT4623 can I update to ios 6 on iphone 3g

    Can I update to ios 6 on iphone 3g?

    Sorry but no. iOS 4.2.1 was the last version of iOS an iPhone 3G would run. If you have iOS 4.3.3 on your phone, then unless your iPhone was hacked, you actually have an iPhone 3GS which can upgrade to iOS 6. You can confirm your model here:
    http://support.apple.com/kb/HT3939
    Regards.

  • HT4623 The new update of ios 7  massage didn't come till now and i don't know what to do??

         The new update of ios 7  massage didn't come till now and i don't know what to do??

    This post was down a few from yours.
    https://discussions.apple.com/thread/4842660?tstart=0
    Restore Tiger 10.4 & Leopard 10.5  DVDs are available from Apple by calling 800-767-2775 as of January 20, 2013.
    https://discussions.apple.com/thread/4720126?tstart=0
    Robert

  • HT4623 can i update my ios software in 3g network not in wi fi.

    can i update my ios software in 3g network not in wi fi

    Oops, sorry this is not possible!
    Yes, it is very silly but the iPad 1 does not have enough ram to cope with ios 6 or 7. Every other iPad can go upto ios 7 except iPad 1, which stays as ios 5.1.1
    I recommend upgrading ur iPad, if u can't afford it maybe then u can always sell your iPad and use that money to buy a new one!!
    Hope it helps,
    Bye

  • HT4623 I cannot update to iOS 8, please help!

    I cannot update to iOS 8 because i get the not enough storage error, even though i have 4.6GB free, according to usage. What can i do? Except using itunes because i'm on holiday and i do not have acces to a computer.

    StylishedTomato wrote:
    I see, but how large is this update? Aren't 4GB enough? This is pretty weird
    It seems to have ranged from about 4.6 to (in my case on a 5S) 5.6 gigs. As with any software download, the amount of space required to download and install the update directly on the phone is much larger than the amount the software actually takes up.

  • HT4623 I just updated ny iOS to the latest version and my iPad still can't find the AirPrint  printer. What am I doing wrong?

    Why can't my iPad detect my printer which has AirPrint even after I updated my iOS o the latest version?

    Reset your router, try again.

  • HT4623 Problem with updating to iOS 6

    Whikle updating to iOS 6 yesterday, phone blocks completly , shows Apple logo and every 10 secs a little tone comes. Have done reset and backup with iCloud and does not work.

    That Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

Maybe you are looking for

  • Having to reorder twice and waiting a month to fin...

    I ordered BT Broadband with BT about a month and a half ago (the first order)! I asked for a new line(not the exsisting line) i placed the online order and set everything up happy days or so i thought!!! new internet very soon. A few days later my br

  • Linking two ODS objects using a multiprovider

    Hello Gurus, I need to link two ODS objects and both are having 3 common characteristics and the relationship between the two objects are one to many. My questions would be.... 1)When the relationship is one to many can I set it up in the multiprovid

  • MIF and cross references

    Hi, I created a simple MIF file: <TextFlow     <Para         <PgfTag `Body'>         <Pgf <PgfFont <FSize  9.0 pt> >>         <ParaLine             <String `Please see the '>             <XRef                 <XRefName `FunctionReference'>           

  • How to change the selections in selection screen

    Hello all, while executing web report we are getting a selection screen initially. 1.problem is when we want to change the selections how to procedure after . when i went to variable screen it is filtering the exciting report. but i want to change th

  • How to make the combobox column in grid can be selectable

    Hi, I have a grid in a form and use a SQL query as the data source. Now I want to make a column(a field in a SQL query) to be displayed as combobox and user can select it. I tried to use below code to make the column displayed like a combobox, it see