HT4623 phone hanging mode after software updation, ios 6.1.2

hi, today i try to update (6.1.2) my i phone 4S through itunes from my Laptop, after updation completed i got one error msg. then my phone not working, i cant switch off mobile, it is hanging mode, why it is like that? Tojo Dubai

What error message did you see?
This Apple doc is a good place to start with update/restore problems -> iOS: Resolving update and restore alert messages

Similar Messages

  • Ipod stuck in recovery mode after software update

    My ipod is suck in recovery mode after software upgrade ios 6. No matter what I did it's still stuck and itunes doesn't recognized it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Iphone 4S stuck in DFU mode after software update

    I tried to update my iPhone 4S but for some reason it failed and went into DFU mode. When I tried to restore the device from iTunes an error code (9) pops up. After several failed attempts I gave up and decided to visit an Apple store. To my disappointment, the restoration failed and because the device was out of warranty (bought in Oct 2011) I was offered a like for like handset for £149. But I declined, I couldn't grasp the fact that my phone stopped working due to a software update and I had to pay for another one. I was also told by the Apple rep that due to the age of some devices, they were not able to handle software updates! That really upset me because if I had known that, I would not have even bothered with updating my phone. Besides, I've had this phone for just under 3 years I didn't think it was that old to not be able to survive a software update.
    Apologies for the rant.. but is there anyone who has/had same experience and is there no way to restore the device?

    Try the steps:
    How to perform a recovery-mode restore
    If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    More info here: http://support.apple.com/kb/HT1808

  • Phone not working after software update!!

    i dont know if anyone could help me but i recently done a software update for my blackberry torch 9800 and after it upddated it hasnt been the same the screen isnt the same some of my icons are missing and nothing is right and i done a software downgrade to see if that would help and it didnt make any difference and i have removed the battery several times but it does not seem to be working and i do not know what to do! so if there someone who might be able to help me i would be very greatful.

    Hi and Welcome to the Community!
    Please refer to this official download portal as you proceed. It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    http://us.blackberry.com/support/downloads/download_sites.jsp
    From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. After installing the OS package to your PC, please remeber to delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    You may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT5957 APN settings don't save on my iPad after software update iOS 7.0.2

    Since the software update to iOS 7.0.2 my iPad 2 will no longer save my carrier APN settings.  I have spoken to the carrier (virgin) and have tried to reset the APN to factory default then re-enter the APN settings.  Nothing appears to be working and virgin told me it is the fault of the apple software update.  Can anyone help or can Apple please fix this ASAP? I can't use my 3G at all, only wifi and need 3G access while travelling.

    Hey Snuggle63!
    I have an article for you regarding this issue with your ability to upgrade your iOS device:
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/TS1275
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Iphone in recovery mode after software update

    Hello, I have just downloaded and upgraded my software on iphone 4.
    It seemed to have taken about 2-3 hours.
    There was an error (which I missed) and now I have on my phone the white apple sign, on my itunes it says - "Itunes has detected an iphone in recovery mode. You must restore this iphone before it can be used with itunes.
    My only option on itunes is to restore to original settings, which Im guessing I will lose all my data etc?
    Does anyone know of an alternative solution?
    I have held down the home and power button but no luck.
    Please help!

    Try the steps:
    How to perform a recovery-mode restore
    If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    More info here: http://support.apple.com/kb/HT1808

  • My phone doesnt work after software update

    I updated my old phone to the most current software but now it wont work

    If you mean you cannot activate it:
    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?

  • Phone inhabilita​ted after Software update

    I just updated the software of my BB curve 9360 as instructed by your BB desktop software, but ever since I did, I have been unable to use it.
    1) The phone has a permanent message that covers the entire screen and says: "THIS HANDHELD DEVICE INCLUDES SOFTWARE THAT IS PROPERTY AND CONFIDENTIAL TO RESEARCH IN MOTION LIMITED ("RIM") AND/OR ITS AFFILIATES AND SUPPLIERS. Except to the extent that RIM is expressly precluded by law from prohibiting you from doing so, ".
    2) The scroll function (square like shape button) in the middle of the device doesn't work
    3) When I attemp to to make a call (by pressing the call button) another message appear in red "Press (BB icon) to attempt an emergency call.
    What should I do?.
    Please your help ASAP
    Thank you,

    Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    Let us know if this message remains.
    ALSO:  You have your mobile phone number listed as your "My Mobile Provider" or carrier. Putting your phone number out on the internet on these public forums for the world to see, is not wise. To change that, at the top of this page click on My Settings > Personal Profile > Personal Information, and in the entry block for "Carrier" type the name of your mobile provider.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Iphone 4s now in recovery mode after software update 7 ??

    hi. i have seen a few comments regarding this, but this is my BUSINESS PHONE and I cannot get it out of recovery!
    it went into recovery after I uploaded (ironically) the bug fix realeased yesterday.
    Now, nothing! Just the itunes connection picture on the phone and message regarding 'phone is in recovery mode'
    HELP!
    Thanks

    Try the steps:
    How to perform a recovery-mode restore
    If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    More info here: http://support.apple.com/kb/HT1808

  • I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.

    I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.
    My MacBook Air is connected and my roommates phones are also connected, but my iphone that always was connected to the same network is no longer connecting to the wifi.
    The network is shown on the device but I can't join it.
    Whats going on? Does someone know how to solve this issue?
    Thank you!

    Problem persisted after fixes were done so wife called apple today.           Their fix is to turn cellular off when in the house and turn it back on when she leaves- the 4 doesn't keep the password so she has to enter the password too... This wasn't a fix ...it's just resolving the connection problem... They also said that they made ios6 have security features so nobody can hack into the wifi without having the password and it has to be entered to use the wifi.  My 5 and the iPads stay on with no problems.  It's just the 4.        So far so good...she's had wifi all day when home.    It's inconvenient but it's either completely reboot it with iTunes (which doesn't work for her) or buy a new phone and she won't do that either.
    So...Apple is saying that she didn't have to do the updates either and could've stayed with the previous iOS     but !!!too late now!!!  We've updated because we think our phones will run better but the ios6 just made it a pita for users
    I wonder if the hackers of the world are having as many issues as the peeps who are just trying to use their wifi??

  • IPhone 4S 32 GB starts aprox every 5 minutes by themself after restoring/updating iOS 6.1.3 from support mode

    iPhone 4S 32 GB starts aprox every 5 minutes by themself after restoring/updating iOS 6.1.3 from support mode.
    What to do? Have 2 times restored iOS 6.1.3

    I am having the exact same problem with my iphone 5.
    I took it back to the Apple store 2 days ago and they gave me a new one, but they told me not to restore it from backup cos if something (an app) is corrupted it will happen again. The only thing they could keep was my contacts cos they did something there that allowed them to transfer them to the new phone. I went home, and downloaded only ONE app (facebook), and guess what - THE PROBLEM IS STILL OCCURING ON THE BRAND NEW PHONE! It is driving me insane as I cant get through the day without my phone.
    Really hoping someone has a fix that will work

  • After finish software updates IOS 7 in my iphone 4s its showing connect to itunes after i connect with itunes its showing 40 hours remaining for update

    after finish software updates IOS 7 in my iphone 4s its showing connect to itunes after i connect with itunes its showing 40 hours remaining for update. But still not finish even after every 30-45 minutes showing error. What i will do please guide me. I'm connecting my device with my acer laptop windows 7 professional.

    firstly thanks for quick reply.
    sorry sir,
    i am confused in last line you wrote,
    " This will erase the phone but you will be given an option at the end to restore to an existing backup, if you have one."
    i did not understand last sentence  -  if i have one? you mean to say if i have data or not in my iphone?
    i have many pictures, messages, contacts which are very much important.
    so will it be all restore and will be backup again in my iphone if i restore?
    i am extremely sorry to interrupt you again.
    waiting for your quick reply
    thanks and regards,
    vishal

  • HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I am facing the same issue! I bought 5c few days back
    and everything was fine till I updated the software 7.0.4!
    Whenever am connected to wifi am unable to make a call and if someone tries
    Calling me they get the message that my number is not
    Reachable! When I go back to 3G the calls work perfectly!!
    Please help me out since I use wifi more than my network.
    Appreciate any advise on this

  • HT4061 my phone model 4s is locked after software update

    my phone is locked after software update

    In some cases a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider if that appears, has helped.  In more difficult cases it has been necessary to restore via the recovery mode per the instructions in http://support.apple.com/kb/HT1808.

  • My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

    my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

    Does the Ipod see the network?
    It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the  antenna. See:
    http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

Maybe you are looking for

  • Windows vista ultimate itunes 7.1.1 VB script error

    I am trying to load i-tunes current version on my windows vista ultimate pc and I keep getting a message which says i-tunes cant install, windows visual basic is turned off, turn on and reinstall? Any one have any ideas. Thanks

  • How can I get my phone to activate?

    So I plugged my phone into itunes to update it to iOS 7 and it gave me an error and said that I had to restore my phone and try again. So I restored my phone and it installed but it won't activate. I can't seem to connect to the network. If anyone ca

  • Report for PR Release

    Hi, I'm writing a report to display the approvers of purchase requisition. I dont find in any MM tables, the approval details are getting updated. Do anyone knows how can i get the PR approvers from any table passing the PR number ?? Regards, JMB

  • How to add note to underlined text for pdf within Preview

    Sometimes I can right-click in underlined or highlighted text in Preview and get an option "add note" so that there's a text box without an balloon icon (like the one you get by pressing control+N). But it is so tricky that I have to try several time

  • Load an Advanced Print Setting in Acrobat via Java-Script

    Hi there, I'd like to know, if there's a way to load an advanced print setting in the Acrobat via Java Script or some other way? (See Screenshot) Or is it possible to set an created setting as default-setting? (also via Java or something) Or can some