HT4623 phones not working after ios6 install

ive tried to update my phone to ios6 and it all went through then my phone displayed plug into itunes done that and its not working it comes up on screen with apple logo and the bar at the bottom processes for 2 mins then turns off and back through the whole situation again.

Try putting your iPhone in restore mode. To do so you have to connect your iPhone to your mac via usb. Then press and hold the power and the home button at the same time. Now when the apple logo appears release only the power button, but keep on holding the home button until the iTunes logo with the usb cabel appears on your display.
iTunes should now recognize your iPhone in restore mode and you can safely restore your iPhone to factory settings.

Similar Messages

TS1702 Certain apps will not work after ios6 install.

Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

My husband had the same problem with some apps after I updated his iPad 2 to iOS 5. I checked the app store and there were updates for the apps to support the new software. After updating, all apps work just fine.

IPad iMessage does not work after ios6 installed

Tried setting and turn on iMessage also FaceTime sign out

Just Reboot and sign in again to you apple account. If this may not work reset your nwtwork settings.

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Phone not working after 8.1 download cannot unlockit

phone not working after 8.1 download, cannot get into menu

To add further info: iPhone 5s and using CDMA mobile service. I either get no sim card or no service.

Phone not working after OS update, phone not working after OS update

phone not working after OS update, phone not working after OS update

I do have a questiion. I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen. It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!! I have tried holding down the home key and power button several times and the same message continues to appear.

My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!

Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
Make sure all your data is available on your computer for manual syncing later.
Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
And you are using iTunes 10.7?
I'm just trying to help get you going.

IMessage not working after IOS7 install?

iMessage not working after IOS7 install?

Yep, it has issues. Word is that Apple is working on an update to fix it but no idea when it'll be rolled out.

Phone not working after update volume. Battery life resets on own

Ever since last ISO update phone not working right. Looses volume. Shuts off Battery life went out to lunch. Texting slow. Any fix yet I see lots of issues. And tec support wants to charge as phone is off warranty. Was working finè before update.
Very sad customer

Hello 2canoes and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing issues with your device after updating your software.
It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Phone not working after 8.1.1 update in iPhone 5

Did 8.1.1 update (stupid 1.2 GB) and now phone not working. It give a funny number on My Number

To add further info: iPhone 5s and using CDMA mobile service. I either get no sim card or no service.

Adobe reader not working after cs5 install

adobe reader not working after cs5 install

Nobody can tell you anything without proper system info or other technical details like exact version info.
Mylenium

T mobile broadband stick not working after lion instal

T mobile broadband USB stick not working after lion install

No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

Phone not working after infinity installation

I have just moved my phone and broadband from Sky to Bt and the engineer called this morning to complete the installation. I have 2 phone sockets. When I had broadband originally installed it was before the days of filters so it required a BT engineer visit. As my computer was upstairs the engineer 'back wired' the sockets (apologies if I have the terminology wrong) so the adsl faceplate was fitted to the upstairs wired extension. Today, the Openreach engineer was initially puzzled but said he would be able to install the Infinity faceplate on the upstairs extension as originally fitted. He checked the line was ok, checked the broadband connection and put the faceplate back on the 2 sockets. After he left I tried to make a call via the downstairs socket without success and I assumed that the phone line had not yet been changed back to BT. This afternoon I received an email from BT advising that my phone was now active but the downstairs socket will not work. I am able to make and receive calls on the upstairs extension. I have just spent 40 minutes on the phone to BT, explaining the problem to 4 different people. Each BT employee advised that it would cost £130 for an engineer to revisit my house to correct the fault that they had somehow caused! To say I'm frustrated is an understatement. Has anyone any suggestions how I can resolve the problem. All 4 BT employees did not really understand the problem. I would appreciate any help.
Solved!
Go to Solution.

You cannot use a phone connection for broadband when on Infinity. The only connection that can be used is that which comes from the home hub 3, which is near the Openreach modem.
You have to use wireless, run an Ethernet cable, or use Powerline adapters.
You phone should work if it is plugged into the botton socket of the new Infinity master socket.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

HT4623 phones not working after ios6 install

Similar Messages

Maybe you are looking for