HT4623 problem after installing update software.

why when i start to install the update software ver. 7.0.5, at the end on my screen only appears itune icon?

If you have the iTunes icon and a cable on-screen then that indicates that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808 - you will need to connect the iPad to your computer's iTunes and you should then be able to reset it and restore/resync your content to it

Similar Messages

Has anybody had problems after installing updates recently?

Hello,
I installed some updates about an hour ago on my MacbookPro, and now it is unable to start up. I do remember that I got a message saying "was unable to install ... and ..." before I restarted, but honestly, I didn't pay that much attention to it because I didn't think I'd get such huge problems from installing an update, and I don't remember what exactly was getting installed, or what two things were listed in the error message.
I think my MacbookPro is in pretty bad shape, because before it can even display the login screen, my screen goes gray and there's a message saying "you need to restart your computer, press the power button down for a few seconds" in several languages. And when I do restart, it takes me back to the same screen. I'm guessing that one of the components that were supposed to be installed didn't get installed properly and that's what's causing this.
I'm wondering if this has happened to anybody else. The first thing that came to my mind was to pop the Leopard installation disk in and see if I can reinstall everything again, but I'm on vacation right and I don't have the disk on me. Are there any known workarounds for something like this?
To give some background info, I use Leopard and I actually reinstalled the operating system (while preserving the non-system files) exactly a week ago, so I am certain that there were no files corrupted, at least on my part.
Thanks,
Yuri

Hi again Yuri,
Sorry that didn't help ferret out the issue. If a trip to the Apple store isn't too inconvenient, it might be worth it (and it's free!). I can give some more thoughts if you have the time and inclination to try to solve the problem yourself.
By the way, what do you mean when you say that your computer automatically reboots? It is making it through the booting process? Are you doing anything specific when it reboots? Will it do this even if you just leave it alone?
Here are some troubleshooting suggestions:
1. Kernel panics can be caused by both software and hardware problems, but the hardware ones are pretty easy to test. You could try unplugging everything you have attached to your computer (assuming you have an Apple keyboard and mouse, those can stay plugged in) and rebooting to see if the problem persists. If you have two RAM sticks in your machine, you could try swapping the bays they're in, and you could also try the Apple Hardware Test if you still have the original disk that came with your machine. (Let me know if any of this doesn't make sense.) My suspicion from your description of how it started is that this is a software problem, but you never know.
2. If none of that works, it probably is software-related. To try to figure out what might be causing the problem (I'm assuming here that your spontaneous reboots are happening after your system is fully booted), reboot your computer normally (to cause a KP so that we have an exact time frame), and then when it forces you to reboot, do so in Safe Mode. You can then access your log files (in the Console Program, under Applications > Utilities) and look for the section called "LOG FILES"—which you may have to click "Show Log List" to see—and select "PanicReporter." If you can paste that information in this thread before your computer crashes again, that would probably be very helpful in diagnosing the problematic software. (If it's quicker, you can e-mail a copy of that log file by selecting it in Console and going to File > Mail.) This file should tell us exactly what the computer was doing before the kernel panic, and if we know that, we might just know how to get around it.
If these solutions don't work, a lot of the troubleshooting procedures can be complicated if it's a software problem and if you're unfamiliar with the UNIX command-line environment. So if you're so inclined, it might be easier to just take the patient in! If you don't want to or can't, I'd be happy to help you further.
Good luck!
—Hazy

802.1x Problem After Installing Update 10.4.10

After installing the 10.4.10 update (from 10.4.9), I have started having problems with authenticating using 802.1x over my wireless connection. I enter my login information when prompted, and after a few seconds (when it says "Authenticating..."), it comes back with an error:
WPA Authentication Failed.
Security Error: 0
If I try authenticating several more times, it will eventually work. It is not a signal strength issue, and it is not me mistyping my username and password.
The only error in the console.log that I see is:
/System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: Could not start 802.1X
This only seems to affect my attempts to log in using 802.1x. I am able to associate with WPA and WPA2 networks using pre-shared keys without any issues.
My 802.1x settings are as follows:
Network Port: AirPort
Authentication: TTLS (all other un-checked)
- TTLS Inner Authentication: MSCHAPv2
- TTLS Outer Identity: (blank)
AirPort card information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: USA
Wireless Card Firmware Version: 1.1.8.5
Kernel Extension information:
AirPortAtheros:
Version: 2.3
Last Modified: 2/27/07 9:32 PM
Get Info String: 2.3, Copyright © 2006–2007 Apple Inc. All Rights Reserved.
Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros.k ext
kext Version: 230.8.5
Load Address: 0x98c000
Valid: Yes
Authentic: Yes
Dependencies: Satisfied
Integrity: Correct
Any ideas? Thanks.
MacBook Mac OS X (10.4.10)

Found the problem... It turns out it is not related to the 10.4.10 patch, but it is still specific to MacBooks and the way they do EAP for 802.1x authentications.
The problem was with the default settings on the Cisco/Airespace wireless controllers, which we have recently migrated to. It has a default EAP timeout/retry of 2 seconds, so depending on how long it takes you to type in your login information and submit it, you might fall outside the 2-second window where the controller is accepting that login. The solution was to increase that window on the wireless controller itself.
My guess is that Windows automatically retries, which is why Windows users did not see this problem.
Mac OS X (10.4.10)

Problem after installing new software on torch 9800

Hi,
after installing the new software version 6.0 Bundle 3159 my blackberry tells me that:
uncaughtexceptation:
Application
net_rim_bb_nabsync_114(261) is not responding;
process terminated
but also there is an e-mail that doesn't work when I wan´t to open it fist of all it doesn't open then suddenly the screen turns white and it tells me something and below it there is a button to reset. If I click on the button the phone restarts

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Problems after installing updates

Hi,
Help, please! I installed Apple Security Update 2007-003 on March 19, along with the iTunes and Quicktime update recommended by Apple. Since then some of my system software is not working. My menu clock doesn't run and I can't burn CDs are two examples. I didn't run Disk Utility before the install, but I did after the install and repaired permissions and disk error. Still have problem. Is there a way to reinstall the updates?
Thanks
Power Mac G4 Mac OS X (10.3.9)

MWilcox6428:
Welcome to Apple Discussions.
You have already run Repair Disk and Repair Disk Permissions. Now download and install the 10.3.9 Combo Update, Repair Disk Permissions from the internal HDD, then run Software Update again.
If this does not work for you, you may have to consider backing up and doing an Archive and Install.
Please post back and let me know how it goes, or with further questions or comments.
Good luck.
cornelius

Another volume control problem after installing new software

I'm having a different volume control problem than the previous poster.
When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Problems after installing 10.5.2 update

Any one else getting error messages via Disk Utility of various types after installing latest update. Going from a clean install with a clean bill of health, to bad directory messages after installing update 10.5.2.
Input/ output errors, etc
ACL errors- I've never seen this until installing 10.5.2.
I also get corrupted directory errors that disk utility is unable to repair disk.
imac G5 takes at about 5 Minutes to start up and for desktop to become active.
I wonder if these are common experiences with Non-intel Leopard 10.5.2 users, or are these issues common to everyone that installed the update?

here was little space on my startupdrive so I suspect that this caused the problem.
That's a big time problem. You may have to connect another Mac to your laptop and boot your laptop into FireWire mode to clear out about 10 GB of space on it and then run the 10.5.2 Combo updater from the other Mac. That's one of the problems with having Software Update being automatic. I never use it.
OT

A problem is after install update december 10, 2014

A problem is after install update december 10, 2014 UAC settings says unknown publisher , troubleshooting not working, when I want to change any setting it says unknown publisher , windows defender not starting etc

Hi
vijay ,
Have you tried the solution provided by
Winword Exonar ? Does it work? Any feedback would be appreciate?
If this is not the cause, then I would suggest you return to a previous point with system restore. or simply uninstall the updates december 10, 2014 , then check if issue persists, we should first find out whether one update included in is the culprit.
Regards.
Yolanda Zhu
TechNet Community Support

Problem in installing apple software updates

HI,
i seems to always have problems in installing updates from Apple website. First is the iTunes 10. However this is resolved by my ISP who helped download the itunes software & send it to me via email.
Now, im having probs installing the latest itunes 10.0.1 version, safari5 and quicktime. (the download usually stops in the middle eg, ard 20%)
Can I download the updates in separate laptop and install the updates from there? Will it cause all my apps to be removed since its a different comp?
I hv yet to update iOS4 for iphone.
Thanks.

HI,
i seems to always have problems in installing updates from Apple website. First is the iTunes 10. However this is resolved by my ISP who helped download the itunes software & send it to me via email.
Now, im having probs installing the latest itunes 10.0.1 version, safari5 and quicktime. (the download usually stops in the middle eg, ard 20%)
Can I download the updates in separate laptop and install the updates from there? Will it cause all my apps to be removed since its a different comp?
I hv yet to update iOS4 for iphone.
Thanks.

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

DVD drive problem after installing 10.5.6

I have MacBook Pro 15",
Model Identifier-MacBookPro 2,2,
Intel Core 2 Duo 2.16 Ghz
Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
Before I install this update, everyting was ok!
Please Help!!
P.S Sorry, for my english

Hi Drug;
Have you tried resetting PRAM by holding down control, option, P and R during reboot?
Allan

Won't restart after installing updates

Hi everyone,
I downloaded the 10.5.2 upgrade through the software updater, and my computer crashed during installation.
When I tried to restart it, it got stuck on the grey apple logo screen, with the progress cycle spinning. It stays stuck like this for an hour.
I tried safe mode restart then (with the shift key help down), and that didn't help anything. Is there anything else I can try?
Thanks!

Hi there,
I have had the same problem after installing the update. The system hang at this position with all fans running for which I have shut down the computer each time but with the same outcome after new booting. Lastly, I booted holding the C key and this worked. Might be a coincidence, worth a try.
Cheers

Computer crashed after installing ipod software

Please, help. My Dell computer wouldn't restart after installing the software for a brand new ipod nano. I'm afraid that it's related to the software CD and I don't know how to get another one under warranty. I just want them to send me a new software CD. Any suggestions?

Not sure if this will actually solve you problem, but...
there's no need to order a new software CD.
You can download all of the necessary iPod software from Apple's website. In fact, this is often preferred over using the CD, since the website will have the latest versions, while the shipping CD might be slightly out of date.
Here's some links to download the software:
iTunes 6
iPod Updater
EDIT: Just realized I might be giving some pretty bad advice since your computer won't boot. Obviously my suggestion will only work if you have a bootable machine with Internet access.
My apologies.
Perhaps if there is an Apple store nearby, you can ask the folks there to put the software on CD for you. Even still, this might be a moot point since you don't have a working computer. You might want to reach out to Dell and get your system in a functional state before proceeding with the iTunes/iPod setup.

Multiple Samsung Stratosphere problems after FF1 update

There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update. Some were replys to older posts and some only touched on a single issue. I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
Summary: Verizon and Samsung have finally updated the Stratosphere almost 1 year after release. This updated the phone from Android 2.3.5 to Android 2.3.6. Going by filename, this is known as the FF1 update. This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
There were some noticable changes in this update:
-Lock screen has changed. The puzzle piece and glass lock options have been removed. New options have been added, such as facial recognition unlock.
-Call answering screen has changed, introducing the option to ignore call with a message.
-Camera now has digital zoom ability.
-Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
-Phone icon has changed ever so slightly
-Wifi icon now included up and down arrows to indicate data is being sent or recieved
-Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
-The visual voicemail app has been improved (I have personally not used this feature)
-Callback number is now supported in text / picture messages
-Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
-Update to how the device deals with the end of scrolling. It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll. (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
-(I am sure there are more. please list any others you may have noticed)
I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
-The biggest problem is with wifi connectivity. Upon an initial connection to wifi, everything works great. After somewhere between 15minutes and 2 hours, problems start happening. Its as if the wifi keeps hanging or reconnecting. Download speeds (tested with the SpeedTest.com app) slow to about one third of normal. Apps like Facebook that require a constant connection will just time out.
-It appears the signal strength for 3g and 4g connections is lower. There are places where I used to get a 4g connection, and now I only get 3g. Some palces I fall back to just 2g digital.
Another minor issue i found was with text messages. When you reply to a message, it no longer automatically focuses the text in the input box. You have to first click into the box to start typing. Not a huge deal, but one more step to take over and over. Minor annoyence.
At my house, I struggle to get a 3g or 4g signal. I depend on wifi for my data connection. So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home. Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
-Complete factory reset on my phone. (did not help)
-Pull battery and SIM card out of phone for 15 minutes. (did not help)
-Went to a Verizon store. The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update. He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
-I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP. Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address. Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this. I have a NetGear N900 router, and I can not change teh DHCP lease time. It appears, however, that my router is not sending out "forever" leases. But just to make sure, I gave my phone a static IP. (None of these steps made any difference).
The only thing that temporarily fixes the problem is a reboot of the phone. This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
I have now had this update for over a week, and on 2 phones. I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
I am asking Verizon or Samsung to at least confirm this issue if possible. Maybe there are newer revs of the Stratopshere hardware that don't have this problem. Or there is something unique about my (and apparently others) situation. But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
Thank you for your time.

Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
Message was updated by David Rensberger

HT4623 problem after installing update software.

Similar Messages

Maybe you are looking for