HT4623 restore my ipad 2?
how i can restore my Ipad 2 cuz my ipad still circle white won't back normal and i did looked for update or something i can download to my ipad all normal again pls help me thanks
Try restarting your iPad by holding down the on/off and the home buttons at the same time until you see the Apple logo.http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US
Similar Messages
-
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
-
Wont restoring the iPad wipe it? Yes I have things in the cloud but still... why on earth would Apple REQUIRE a complete restore. Im afraid to even do it now because I do not want to lose many many pictures of my little boy, apps, videos and al lthe work Ive done to personalize this ipad.
Someone please let me know whats up!
Thanks.During a normal install of iOS 7.0.6 this does not happen but something clearly went wrong in your installation.
To fix this, connect to iTunes and restore to Factory. Hopefully your iPad will be working again and you can restore your iCloud backup during Setup. -
HT4623 I want to restore my iPad.
I want to restore my iPad to factory settings, but when I try to it tries to download iOS 5.1.1 before I can restore. I have already updated the iPad with iOS 5.1.1 using wifi. My itunes says that the iPad is updated, and yet it still wants to download iOS 5.1.1. Can someone please help.
If you restore your to "factory" a fresh copy of the iOS operating system is installed thus it will download iOS 5.1.1.
-
HT4623 how do i restore an ipad after an update?
How do I restore my ipad after an update?
Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad -
Tried updating my iPad2 with the most recent update and now it is saying that I have to connect to iTunes and restore my Ipad2, what happened? Did I lose all my stuff that I had on it?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
My sons ipad2 is stuck in recovery mode. The only option on I tunes if to restore the iPad. However, he does not want to restore it and lose all of his things on the iPad.
Does he have a backup on his computer or iCloud?
You can redownload apps/music etc for free.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
HT4623 i cant restore my ipad,i tried host file and i have latest itunes still error 3194
i cant restore my ipad,i tried host file and i have latest itunes still error 3194
If you have beta software as your tagline indicates, then as you are a developer then you should be posting in the developer forums : https://devforums.apple.com/index.jspa
-
HT4623 What if the update stalls and it requires me to restore my ipad
My ipad did not update and it says I need to restore the settings - What should I do I do not want to lose all of my data
Its telling you to restore the iPad software - not the iPad settings. Did you connect to iTunes and try to restore?
There is no way to get around this issue. If you didn't backup your iPad, then yes you will lose all of your app data and app settings and you will have to start all over again. If you sync with iTunes, you should have some sort of backup and your apps and other content should be in the iTunes library to sync back to the device after you restore. If you have been using iCloud for your backups you can restore from that when the restoring of the software is complete.
But the bottom line is, no matter what you have or haven't done. You must restore the iPad with iTunes now or you will not be able to use it. -
HT4623 i have restored my ipad and now it will not activate......any ideas
I have restored my ipad trying to update to the latest version and now it will not activate....... can anyone suggest any thing
Hi Griff W, Thank you for your response. I had found that article and did everything. I am on my MacBook Pro right now and this device, as well as my phone, smart TV, the Wii and Xbox are all reading our wi-fi connection (and I can see about half dozen neighboring networks). The issue with the iPad is that no list appears to choose from, much less forget and resign in. It worked fine before the update to iOS 5.1.1. I have tried everything I have read and could think about and come up with the "choose a network" with the thinking wheel just spinning and no list ever appears.
laine mac -
I downloaded the update because why not. I then turned my iPad on and get the iTunes logo and a lightning cable picture. I plugged the ipad into my computer and opened iTunes.
The I got:
"iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes"
When I click restore it then says:
"Are you sure you want to restore the iPad "iPad" to its factory settings? All your media and other data will be erased, and the newest version of the iPad software will be installed.
iTunes will verify the resotre with Apple. After this process is complete, you will have the option to restore your contacts, calendars, messages and other settings."
I don't want to lose my media. I was never told to make a back up, I was never told the update would be this difficult.
Can I just revert back to how it was before?I downloaded the update because why not. I then turned my iPad on and get the iTunes logo and a lightning cable picture. I plugged the ipad into my computer and opened iTunes.
Then I got:
"iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes"
When I click restore it then says:
"Are you sure you want to restore the iPad "iPad" to its factory settings? All your media and other data will be erased, and the newest version of the iPad software will be installed.
iTunes will verify the resore with Apple. After this process is complete, you will have the option to restore your contacts, calendars, messages and other settings."
I thought okay, I'll just erase everything then. I get error 3004 when I try to restore.
I've tried disabling my security software, updating iTunes, replacing my hosts file and using a third party software recovery tool. Nothing works. I never thought Apple would break my iPad with an update but they managed to.
Any solutions?
Thank you. -
I just tried updating my iPad through iTunes and it said it was unsuccessful and now is telling me to restore my iPad!! why is this and I'm not sure if it did back up because my iPad will not turn on.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I have had to restore my ipad to factory settings, having made a backup on my pc first. When Ihave tried to restore from my pc I have no apps!! Please can anyone help me get them back with all their data. I don't have wifi at home and I have never been able to sync my pc with my ipad, although it works with my iphone! I copied all of the apps before I restored using itunes, but no idea where they are copied to. Any help would be hugely appreciated to get my daughters games back. Thank you in advance )
Hi Skydiver119
Thank you so much for taking the time to reply to my problem.
Yes the purchases were made though my apple id.
I have looked at a few other questions on this topic and I have read that the app data is stored in the backup file but the apps themselves need to be synced back onto the ipad. Someome has mentioned right clicking on sync my ipad but I don't know where to find that to right click on!! Lol.
Again, I really appreciate your time and if by any chance you know where I can 'right click' I would really appreciate you letting me know as I can't get my ipad to sync with my pc at all, although it is being picked up in itunes and it has backed up to itunes okay. GGrrr. Maybe I have something wrong in the settings which is not making them compatible? -
How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.
Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg
Maybe you are looking for
-
Confused after re-install of OS... Base software not th
After I re-installed windows due to some issues I was having, I've not been able to get my sound card right. I don't need a PC if my sound card ain't right. LOL After install of the drivers and everything else I can find to install, I don't have any
-
How to keep field from populating with default numbers?
It's hard to describe my question so I've included a screenshot of what I'm working on. In the third column, there is a calculation in each field's properties to take the number from field to the extreme left of it (in middle column) and subtract the
-
Hi. I'm just in the process of looking into an upgrade from version 5 to 7. I have a critical client project that involves merging their RH5 help system into our RH5 help system, and I've been accomplishing this by using Peter Grainge's techniques (t
-
How do i restore my ipod without an internet connection?
I've found a few other posts asking, but I haven't found an answer. I've got a 4th Gen Ipod and it has a flashing folder error folder. Going through the troubleshooting steps, I tried reset with no success. I'm at step two, Restore. I don't have an i
-
Can the filmstrip in LR be permanently disabled?
I use a mac with two monitors and have the second monitor situated below the main monitor. In my workflow, I use the second monitor to view my thumbnails. So the filmstrip is not something I really refer to. In addition, in Develop mode when I sele