HT4623 software updates and there is no option to update in settings menu
My phone doesn't seem to be receiving software updates and doesn't give me the option in the settings menu.
Updating from the iphone itself is ONLY available in iphone currently running ios 5 or later.
Read the rest of the article you linked from and it will tell you how to update via itunes
Similar Messages
-
My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I have a new computer and a old iphone 4 that hasn't been updated in a long time. I logged into itunes on my new computer and plugged in my phone and there is no option to sync. ;( suggestions?
The ipod is not a backup device. The music sync is one way - computer to ipod. the exception is itunes purchases. Without syncing: File>Transfer Purchases
Copy everything from your old computer, or your backup copy of your old comptuer, to your new one. -
I have a visa card for Zambia and there is no option in your countries that allow you to pay from Zambia. Please advise what I can do?
TomWolves
I would do another rename to disable or just delete all the OldFilm.AEX and OldFilm.AEXOLD in that NewBlue Folder.
If you do, please let me know if that OldFilm.AEX regenerates itself the next time you open Premiere Elements 13.
Here is the strange story...at least from my Premiere Elements 13 Windows perspective...never had the No Disc error issue
Here are some details to sort through trying to figure out why you have 2 OldFilm.AEX file in the NewBlue Folder.
1. The original OldFilm.AEX file of Premiere Elements 13 has the date of 9/4/2014 (just before the version was released on 9/24/2014).
After the 13.1 update is done (whenever date), that OldFilm.AEX file has the date of 1/31/2015. I first saw notification of the 13.1 Update
release early in February 2015.
2. Now in Premiere Elements 13.1, if I take my OldFilm.AEX (date 1/31/2015) and disable it by renaming it to OldFilm.AEXOLD, close out of there, and reopen
the program, the OldFilm.AEX is not seen to regenerate. The OldFilm.AEXOLD remains there as its lone self.
3. So, I am thinking that your OldFilm.AEXOLD in the screenshoot is "original equipment" that you disabled to get rid of No disc error.
Why the OldFilm.AEX is there also is not clear, but the dating on it suggests that it came along with the 13.1 Update.
Bottom line: let us try the deletion or disabling one more time and see what happens.
Looking forward to further reports on your findings, as your time permits.
Thanks.
ATR -
HT4623 My iPad does not have software update in settings? What can I do to get iOS 6?
My iPad does not have software update in settings, what can I do to download iOS 6?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
how do i disable iMessage from my mac, i have looked at other comments and there is no option to disable it when messages are open
Solution may be found if you search in the "More Like This" section over in the right column.
-
Apple TV sleep mode remote shortcut no longer works with newest software update. Why? Is there an alternative other than nav to settings menu? Reset remote shortcut dead as well. :(
Hold Menu + Play/Pause to reboot the box from the main menu.
-
trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?
Try the manual method specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch -
How come some previously downloaded tracks wont play in itunes 11.1.3 and there is no option to download again?
Hey KMK14,
I understand you are having issues with a few tracks in iTunes. The best troubleshooting step may be to delete the song from your library, and re-download using iTunes in the Cloud (if available in your country).
For more information, see the following:
Songs in iTunes may not play back completely
http://support.apple.com/kb/TS4357
Symptoms
Occasionally, if a song purchased from the iTunes Store on a Mac or PC was not downloaded completely, the song may not play back fully. The song may abruptly stop during playback, and iTunes may start playing the next song in your library or playlist.
Resolution
If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
1. Delete the purchased song that is exhibiting the problem from your iTunes library.
2. Click on the Purchased link in the iTunes Store to view your previously purchased music.
3. Download your previously purchased song from this list.
Note: iTunes in the Cloud, which allows you to download previously purchased songs from the iTunes Store, is not available in every country. Learn if iTunes in the Cloud is offered in your country.
Thanks,
Matt M. -
how to play videos in normal quality in youtube as it is always buffered in hq and there is no option to change quality?? problem because i hav network speed upto 512kbps and hq videos are nt buffered properly in it..
macalltheway wrote:
What a bummer.
Now I'm stuck with a just-about useless camera. I really need something as small as the FH1 (it's TINY).
Hard-drive camcorders record MPG2, which I assume makes them just as useless.
Is then MiniDV the only choice for a sub-$500 1080i/p camera that will allow me to edit footage without converting?
If so, any tips on the smallest one out there?
Google came up with Sony's DCR-PC55, but it's four years old and only does SD...
Do you want good OR do you want cheap? That is the decision you need to make. Also, tiny tends to be the opposite of good.
P.S. AIC converted it best; ProRes(Lo/HQ) left it pixelated for playback. But it takes about an hour a minute, and increases the file-size tenfold, so it's no good anyway.
Yes, your actual editable video file is going to be 10x bigger than a MPEG-4 file. That is what you want.
P.S. 2 "....FCP is converting your video behind the scenes which is causing all your problems."
If that's the case, then my oldish MacBook Pro (2GHz Duo, 2GB RAM) has enough juice to play the 640x480 MPG4 clips smoothly, but not the HD ones. Could the latest MacBook (2.5/6/8GHz, 8GB RAM) could play the 1080p30 clips smoothly?
No, you still have the same problem. MPEG-4 files are non-editable. You really need to convert to an editable format and then bring that into FCP. MPEG Streamclip is going to be your best choice. -
When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk. Any ideas on how to fix this problem?
-
I was working on Setting of my iphone4S, and there was an option ''Zoom''. I made it enable and there after whole screen has been 10 times larger. Now I can Not do anything, even can't open my phone anymore because I can't see the sliding option due to extra large screen. Please help me.
Did you try to tap using three fingers?
Turn Zoom on or off. Go to Settings > General > Accessibility > Zoom. Or, use the Accessibility Shortcut. See Accessibility Shortcut on page 123.
Zoom in or out. Double-tap the screen with three fingers.
copied from page 134 of the user guide iOS7 -
Hi can you help the sound is not working on my Mac I have went into settings and there are no option for interal speaker help
Read the documentation at the links. They won't hurt your data.
Basically smc reset is shutdown, pull your plug for 15 seconds, plug it back in, wait 5 seconds, and reboot. Harmless to you. Resets the smc.
Pram reset is similar but you need to push commnd-option-P-R after the boot chime. Read what does.
smc and pram reset -
i upgraded my os to the latest lion os on 39th NOV . But unfortunately i had to reinstall the os back ( A big story ) .
so i reinstalled and brought it back to 10.7.1
Now when i try to open iphoto it says i need os > 10.7.2
every other ilife apps are opening .
please help
i even tried software update from apple menu but it says my os is up to dateThe current version of the OS is 10.7.2.
Regards
TD -
i have just made my apple id. i have made this for itunes. after making my account i have problem with the review payment information as i do not use any credit cards and there is no option like NONE in review payment information. what should i do now? to proceed further? plz help me!
How did you create the account ? If you followed the instructions on this page when creating it then you should have got the 'none' option : http://support.apple.com/kb/HT2534
e.g. on a computer's iTunes, if currently signed into an account then you logged out of it, and you then found a free app in the store and clicked on its free 'price' :
And then clicked on 'create Apple id' on the popup :
When I tried that process to create an account a few days ago I got the 'none' option on the payment details screen.
If you didn't use that process then you will need to create a new account using it (the instructions won't work with an existing account). -
i had created my apple id from apple's site and now when i am trying to sign in to itunes ,i m being taken to payment method page and there is no option as 'none' and i dont have a credit card.What to do?
Unless you use the steps on this page when creating a new account : http://support.apple.com/kb/HT2534
then you will need to enter credit card details before the account can be used to download any item from the store.
If you don't have a credit card then you will need to create a new account, and follow those instructions. If you want to use the same email address then you will need to remove it from that account first e.g.by logging into it via the Store > View Account menu option on your computer's iTunes or via http://appleid.apple.com - you should then be able to use it on a new account.
Steps for creating an account on a computer's iTunes : https://discussions.apple.com/message/24321860#24321860
Maybe you are looking for
-
Hallo it is possible from MAC MINI with thunderbolt , displayport to connect with a Display (only USB3 port) thanks
-
Can't find saved Photoshop Elements project
I am using Photoshop Elements 9 on Vista. During my attempts to create a slideshow, I've saved my project several times. When I try to reopen my saved project, it is not listed in Organizer. I just see my various slideshow attempts with this project.
-
i need to buy an ipod shuffle 4th generation for work using earphones but at home are there adapters to hook it up to my sony home stereo dock? the dock isnt compatible w/the shuffle but is w/the other ipods. Plz advise thank you
-
Hi all, I need to get all the selected row of a table and pass it to another node .I followed the thread Re: How to Select Multiple Rows from a Table in Webdynpro Abap but i am getting errors in the following code LOOP AT lt_temp INTO wa_temp. C
-
Change tablespaces when importing
Hi guys, I have a exported dmp file that was originally saved under tablespace A. Now when i import the dmp file i would wish to import it into tablespace B instead. the complicated thing is that i would like to create the tables under tablespace B a