HT4623 The display on my 4S has a hallow arounfd the edges and a black area in the middle resembling a domino
The display on my 4S has a hallow around the edges and a black area in the center which resembles a domino with 6 spots
The front screen assembly is probably a poor quality replacement, with the front glass being too thick and causing pressure on the LCD Display below it. Or when the screen was replaced they forgot to remove the plastic protection film, so this sheet of plastic is making the entire front assembly too thick, causing pressure on the LCD Display. The bit about the domino with 6 spots seems like the Mirror sheet at the back of the Sceen is removed, or again is just from all the pressure I described in my first two sentences.
Similar Messages
-
Please help! I just sync my notes to icloud of my ipad mini but after that all notes has been covered by iphone's and all notes are missing from iPad,how could i restore it?
It's very possible that you did just as you suspect. One of the later Note file over wrote the one stored on your iPad when you synced.
When one does a sync of their iPad a backup of the iPad is created first. If that backup was still available you might be able to find the Note file there. But more than likely, if you are letting the iPad and iPhones sync on their own over Wi-Fi you have over written that back up as well. -
I can't update my iPod Touch software. It fails at 777 mb of 778mb saying download has timed out. Computer settings and broadband connections are fine. Help please!
Disable or turn off all firewall and anti-virus software and try the download again.
Stedman -
I upgraded to a Droid Maxx about 2 weeks ago and all seemed well. Last Friday, I started receiving an "Unfortunately, Messaging has stopped" error message randomly--sometimes when I was writing a text, sometimes when I would open other apps, there was no rhyme or reason to when it would occur. Now it also appears that I am not receiving some of my texts. I called Verizon Support who told me that they are experiencing this problem on several devices and that she was going to forward me to someone for help. 20 minutes later, no one had picked up and I had to leave. So I thought I would try here to see if Verizon has come up with a fix for this, if I should get another phone, or if they are working on a software update or something. Help, I really liked this phone until now!
Hello,
I am using the messaging app that was preloaded with the phone, the green face icon. I do not have an "Android Keyboard" app, but I have cleared the cache on the "Messaging" app, several times. I have also gone to the Verizon store where an associate did a soft reboot, telling me that would work. A very short time later, the error message started appearing again--so this did not work either.
The error message comes very sporadically. Sometimes several in a few minutes, other times not for hours. -
Is there any way to see if any other FaceTime id or iCloud account has logged into my personal iPhone and iPad
If you are concerned.
Log off all iCloud and Apple ID accounts on your devices.
Change you password for Apple ID and iCloud.
Please read so you don't get stuck!
http://support.apple.com/kb/HT5621 -
I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated. I would also like to know what some alternative applications might be. This trial does not give me confidence in Adobe's product.
I saw a similar question deeper into the forum right after I posted. I followed the fix steps and it took care of the problem.
Thanks for getting back to me. I am good to go. -
The display on my computer has turned into pink lines and i don't know what i should do
The display on my computer has turned into pink lines and i don't know what i should do
what model and version of osx. You can also try a apple hardware diagnostic, restart holding option + D.
-
I have a MBP Retina LCD (resolution 2880x1800) and in the office I use it with a Monitor Sony LMD-2450W connected by VGA. After installing 10.9.2 the resolution in the monitor has been downsized to 4:3 (and 1280x960) instead of its 16:9 display. Anyone know how can I change the resolution manually?
Display shows only 3 different resolution if I choose "scaled" but none use the full area of the monitor.
Thank you
MarcoThis has been an ongoing problem with external monitors that predates 10.9.2. I wrote various tips on different methods here, though the best is probably the hot corner one:
http://applehelpwriter.com/2014/01/25/how-to-correct-the-external-monitor-resolu tion/
(note: this links to my own personal website and is not endorsed by apple in anyway) -
My 27" 2010 iMac has recently began freezing and movement on the display is molasses slow. We have 500 gigabytes available and no applications running and the problems still persist. Any advice?
IF your system is running extremely slow with no applications running other than Finder then I'd suspect a failing HD or you have a runaway process somewhere. Open Activity Monitor (Applications - Utilities - Activity Monitor) and look to see if you have any applications taking a large %CPU, if you do that is your problem. To test the HD run Apple Hardware Test, please read:
http://support.apple.com/kb/HT1509
to learn how to run AHT on your machine, also run it in EXTENDED MODE so it does the most complete test. If no errors are found after the first pass run it another 2-3 times to be thorough. -
My imac (Intel) display is frozen. Both the mouse and the network are working. I've shut down various times, pulled the cord from the receptacle on the power strip, and restarted several times. No luck. Has anyone had problems like this and were you successful at fixing it? Thanks. Would appreciate any help. Paula
Same problem, but a c.2009 iMac running OS X 10.9.1. Just happened overnight. Presently, I'm able to access my HD via wireless via laptop and copying all non-backed up files to an external drive. So far, Paula is the only other person I've found with this same problem and hers was three years ago! Going to keep searching for an answer.
-
Display on my screen has turned 90% to the left on Equium
Greetings from Scotland.
I have a problem with my laptop display and wondered if anybody can help me.
The display on my screen has turned 90% to the left, so the top of the page is at the left of the screen running to the right of the screnn instead of from top to bottom, anybody any ideas of how to fix it?
regards
kevinHi
Do you have a Intel graphic card?
If yes then you could change the display position using this key combination:
Rotate to normal: CTRL+ALT+UP
Rotate 90 Degrees: CTRL+ALT+LEFT
Rotate 180 Degrees: CTRL+ALT+DOWN
Rotate 270 Degrees: CTRL+ALT+RIGHT
If you are using another graphic card please check the graphic properties and advanced settings -
hi today i bought an itun gft card from shop ,but i found it doesnt work and display "the code has not been proprly activted". why and how to fix it up
The people at the store the gift card came from didn't activate it. Ask them or the iTunes Store staff for assistance.
(122684) -
I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help
Connect the iPhone to the compter you usually sync with
and use iTunes on that computer to do the restore. -
hi
i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?I switched the usb port and did the whole recovery holding of the buttons ect... And it worked, the computer detected the phone and i was able to click restore. However, the computer says preparing iphone for restore and it is still doing the restarting thing where the apple fades away and then comes back like it is restarting. If i can somehow get past this i will be able to go back to factory settings and resolve my problem, but this is where i am stuck.
-
I just got my iPhone 4 yesterday after having a Blackberry for 3 years. Everytime I try to download any type of application it keeps displaying "Your Apple ID has been disabled." Before activating my iPhone I downloaded the most recent iTunes. I even went back today I reset my password after some minor research made the suggestion. I sent an e-mail off to to Apple last night after their Apple tech was no help at all. He is the one that suggested the e-mail and that he could not help me. I am really frustrated at this point. I am hoping that someone will be able to help me out. I was extremely excited about getting my new iPhone 4 and now I am just over it! Help please!!!
USER-kswest wrote:
BTW I have gone to the "Contact iTunes Support" and do NOT get anywhere. That is why I am here!
You need to contact iTunes support and send an email by following the link I posted.
Simply going there does nothing.
Maybe you are looking for
-
902: DefaultConnectionStrategy is disconnecting an application module conne
Very odd exception from BC4J 902 We have 4 ears deployed to this appserver, hot deploy happens most days for all 4 deployed ears. There's common classes deployed in all ears. Some times we see class cast exe's but that may be another issue. We've not
-
Separate flattened data with unknown number of columns
Hi I am working on a runbook for a customer which returns the number of windows updates in a software update group and sends an email. Currently only the update title is returned from the SQL query and that activity is flattened with line breaks to g
-
Errors in Livecache when running a "check database structure"
Helleo, i have the following error messages when i do a check database structure of our QA Livecache environment : DBA Action starts: Timestamp: 20090406141745 Function: cdb Object: DATABASE VERIFY command: check data VERIFY result: ERR -24988,ER
-
Inspection type 04 should not generate Insp.lot for specific Process orders
Hi Guyes, I Want to skip the Inspection lots generation for specific process orders of a particular material during Goods Reciept and stock should be directly posting in to Un-restricted stock. In the material master assigned with Inspection type 04.
-
Security error while removing LookUp value
Hi Experts, I want to display my own values in User type Dropdown box on create user screen. It is mapped to lookup definition: Lookup.Users.Role. I added my custom values from the design console in this lookup but when i tried to remove the existing