HT4623 the server is unreachable. try reconnecting . if the problem continues, verify your settings and contact your administrator.

the server is unreachable. try reconnecting . if the problem continues, verify your settings and contact your administrator.

how to set internet.. vodafone

Similar Messages

New computer at work and all my song are on the server-when I try to change the folder location under preferences to the server, it still won't show my songs in Itunes?? please help!

I have a new computer at work and all my song are on the server-when I try to change the folder location under preferences to the server, it still won't show my songs in Itunes?? please help!

Howdy carpetjim,
When you change the folder location like that, it changes where new songs and media are stored. To actually load the library you need to do this:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
If you are using the Mac, open iTunes and immediately hold down the Option key.
You should see one of the following screens:
Additional information
If you do not see one of the screens above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
From: iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Take care,
Sterling

Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.

Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

Error:Cannot connect to WMI provider. You do not have permission or the server is unreachable

I'm getting the below message when i try and access SQL Config Manager on my Windows Server 2003 R2
"Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 and later servers with SQL Server Configuration Manager.
Generic failure [0x80041001]"
Also tries with the below solution but still the error persists
The solution is to go to a command prompt as administrator and then run mofcomp.
C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
Below was the output of the command:
Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
roviderxpsp2up.mof
(1): error SYNTAX 0X8004402f: Error creating temporary file
Compiler returned error 0x8004402f
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
Can anyone tell how this problem can be solved?

Sorry for the mistake.The command prompt is
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
And error i got is
Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
roviderxpsp2up.mof
(1): error SYNTAX 0X8004402f: Error creating temporary file
Compiler returned error 0x8004402f
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
I hav checked that sqlmgmproviderxpsp2up.mof is in C:\Program Files (x86)\Microsoft SQL Server\100\Shared\ folder.

"The server responded with an error. The server is currently unreachable or the connection was blocked"

Hi, since this morning i receive this message on my Mac Air (10.8.5) when i open iCal (which is synced through iCloud): "The server responded with an error. The server is currently unreachable or the connection was blocked". You know what it can be?
Thanks for your help!

Are you behind a firewall at work or elsewhere? Does you calendar sync with some other system like google (could be the google server is not responding)? All we know from the message is that your mac cannot reach the server. Maybe try later. Are you using wifi or have an ethernet connection to the router?

I am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

Entourage error "The server for my email acount returned the error "Login Failed". Your username/password or security settings may be incorrect. Would you like to try re-entering your password?"

I have 1 user on a Mac who just started having a pop up message when opening entourage "The server for my email acount returned the error "Login Failed".
Your username/password or security settings may be incorrect. Would
you like to try re-entering your password?" I know the settings are right because the users mail works on iPhone,iPad,an windows machine. I have deleted entourage plist and also tried a new user same message appears in new user.

See thread here:
https://discussions.apple.com/message/23175721#23175721
It worked for me.

My phone was working fine. Today it became de-activated. I am getting the message that it needs to be activated and when I try to it says the server is busy, try again. I still have my wallpaper and it accepts my password and is on our wifi. What do I do.

My iphone is no longer activated, It worked for three weeks. I can't get the server to work. On hold with Verizon for almost an hour and half and got disconnected.

You have a bit of a mess on your hands, but you can try doing this:
Download the iOS 6 update (ipsw) file to your computer from here: http://osxdaily.com/2012/09/19/ios-6-ipsw-direct-download-links/, being careful to download the version for your model.
Put your phone in DFU mode, as explained here: https://discussions.apple.com/thread/2648467?threadID=2648467&tstart=0
Restore you phone in iTunes using the ipsw file you downloaded in step 1, as described here: http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/.
If you get a 1014, 1013, 1638 or 3194 error, you access to Apple's servers is being blocked by your Hosts file. You'll have to edit your Hosts file to remove this block, then try restoring again. You can use Google to find out how to do this.

How come, when I add myYahoo! email account to MAIL, after verifying, I always get the "server unavailable. please try again later"

How come, when I add myYahoo! email account to MAIL, after verifying, I always get the "server unavailable. please try again later"

THANKS! this worked !!!
I hit "DELETE THIS ACCOUNT" on my iphone (this is the Yahoo I tried to set up by "picking" it from the list that the iphone5 gives you) and then confirmed to delete everything.
THEN: while in Mail (still in the Settings Section) I tapped on "ADD ACCOUNT..." but this time tapped on "OTHER" and manually put in my yahoo ID and password and I did not even have to go to the SMTP or IMAP incomming/outgoing stuff at all. But I checked it out under the "ADVANCE" tab and it was already correct for yahoo. (ALMOST SEEMED TOO EASY)
Went to my home screen and tapped on MAIL and my yahoo email loaded up just right!
Now, I have no idea if I have any other issues like if I delete mail on the iphone; does it delete properly on my ipad...etc..etc. but one problem at a time is getting fixed. THANKS!

An error has occurred. There was an error communicating with the server. Please try again later.

I have a simple form which allows users to submit receipts as attachments. I have some required identifying information (name, etc.) and then three optional slots for attachments, along with optional text boxes for descriptions. The form tests fine with attachments on my computer and on a couple other computers we tested with.
However, I am getting complaints from several users that they see the following message when they hit "Submit": "An error has occurred. There was an error communicating with the server. Please try again later." Any ideas why this might be or how I can fix it?

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

"Sync encountered an error while connecting: Failed to connect to the server. Please try again."

"Sync encountered an error while connecting: Failed to connect to the server. Please try again." message has appeared on both my desktop (OS 10.6.8, FF 6.0.2) and laptop (same).
This error is not covered in your help documentation.
I have an active internet connection.
I have tried resetting the Sync on the laptop several times over the last few weeks.
Please advise.
Thanks

Hi!
It seems that you are not using the latest version of Firefox. Please, update and try again: http://www.mozilla.org/firefox

I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

Hi,
Sometimes the server is not available and you can get an error like this one. Usually it works if you try to sync later. If this doesn't work, take a look to [https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/ this post] to learn how to report a bug.
Let me know if this is helpful.

TS4104 I am receiving the following error message: There was a problem connecting to the server "Diane's Time Capsule" - check the server name or IP address, then try again.

I am receiving the following error message: There was a problem connecting to the server "Diane's Time Capsule" - check the server name or IP address, then try again.

This might just be a typical Mountain Lion network glitch..
Reboot the TC.. that is usually enough to fix it.
Otherwise restart the whole network from off.. Reboot items in correct order.
Modem.. TC.. computer. 2min gap.
Tell us if that doesn't fix it.

TS3988 It says "unable to connect to server" when I try to accept the terms and conditions

It says "unable to connect to server" when I try to accept the terms and conditions for ICloud. I have an Iphone4G

Delete the iCloud account and sign back in.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

HT4623 the server is unreachable. try reconnecting . if the problem continues, verify your settings and contact your administrator.

Similar Messages

Maybe you are looking for