HT4623 the update does not install

The ios7 update will not install on my 4s phone it tells me an error occurred

That's too bad.
When actually ready for help, provide details of the issue including the specific error that is occurring.

Similar Messages

"The updater does not have a firmware image"

My initial problem was that I suddenly could not copy purchased music from iTunes to my iPod. I tried the suggestion of downloading the iPod Updater. The Updater did indicate that my iPod software, 2.2, "needs update". Upon attempting to install the Updater (by clicking 'Update'), I received the following message: "The Updater does not have a firmware image." I notice that SEVERAL people are having the same problem at this very moment on this message board. I hope someone from Apple notices this fiasco and does something to fix it. Please help. Restoring my iPod is not an option for me. Thanks.

Yes, I've had this problem too. And the iPod has not been updated with any of the tracks I bought since updating to iTunes 5, but iTunes REloaded all the older tracks onto my iPod. Why? Seeing as the upgrade to iTunes 5 was a bit traumatic in itself, I'm not altogether surprised to discover the newer tracks had not been copied: there is obviously some incompatability here somewhere - but goodness knows where.

Droid X2 2.3.4 OTA update does NOT install on my phone

Hello,
Today, when I checked for software updates in the settings page of my Motorola Droid X2, it said the 1.3.380.en.US is ready to be applied. I downloaded it and clicked on install once download finished.
The phone reboots, shows the logo and the progress bar for installing the update and then shows an exclamatory mark. The progress bar also stops. Then the stupid phone reboots and when I unlock it, it says the update has failed.
This is unacceptable from a smartphone and I am already **bleep**. Firstly, the phone has 10's of issues (music stutters, etc.) and many people complained about it. And Motorola releases this update that is supposed to fix those issues. And now, the update does NOT even install. Why? Please let me know what I am doing wrong. Or is anyone else facing this issue? Do I have a bad phone and should I replace it?
Please help!
A very very frustrated Droid X2 owner.

I can't speak specifically to the DX2, as I have the original DX ... I assume you've tried a Battery Pull ?? Just power it down, remove the battery and leave it out for like 1 minute - reinsert & power up. See if it proceeds with the update ... if not, you'll likely have to do the factory Reset. If you have data on your SD Card that you want to preserve make sure you don't select "Format SD Card" -- or just remove it entirely before starting the F.R. process.
If you take it to Verizon or call them, they will likely walk you through, or do, the factory Reset anyway .. And since you seem to have "10's" of issues, this might be the best path for you to take anyway ... and in fact if it were ME, I would just bite the bullet, allow the Format of the SD Card, and be done with it .. Of course you'll have to re-download all of your FREE apps after doing so. And if you can't get the phone to boot up, that in itself can be a challenge because Market won't know about them after you do the F.R.
So if you decide to do that, I would go ONLINE to MARKET and write down a list of all your Free Apps before starting the process.
Good luck ..
http://community.vzw.com/t5/DROID-X-by-Motorola/Factory-reset-the-what-why-and-how-for-Gingerbread/m-p/544836#M24742

Help - Logic 8.0.2 update does not install

The Logic 8.0.2 Update does not install on my machine. The installer goes through the motions very quickly and my Logic Pro app still indicates version 8.0.1. Logic node, Waveburner, etc. all seem to have updated to the .2 version. After not taking with Software Update, I downloaded the updater and that didn't work as well. I have also tried trashing the appropriate Receipt packages (though there was no Logic 8.0.2 receipt). Any help would be appreciated!!
2x2.66 dual core Mac Pro, OSX 10.4.11
Michael

Thanks for your help, Erik. I just got off the phone with Apple support and the solution was dumber than dumb: somewhere along the line Logic Pro was renamed "Logic Pro 8" to distinguish it from ver. 7 still on my system. Renamed it "Logic Pro" and voila, the installer recognizes it!
"mistakes were made..."
Michael

AdbeRdrUpd1001_Tier1.msp Update Does Not Install using Nullsoft

Hello,
I am attempting to use the Nullsoft Scriptable Install system to install the Adobe® Reader® 10.0.1 update on Windows XP SP3. I determined that the Adobe update will install as expected when I run the msp on a console command line with the following arguments:
C:\temp\> AdbeRdrUpd1001_Tier1.msp /passive /norestart
However, when I put the same exact command into Nullsoft script, the update does not get applied. I have a theory that the Tier1 update needs to determine language information from Windows XP and because the Nullsoft script executes in a Windows environment that is not fully initialized, the language information is not available and the update fails. If you can expand on this or provide any insight please respond to this message. Any help with this question would be greatly appreciated.
Thanks, Jeff

you could start by uninstalling the HP Update program from Add/Remove Programs.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Viewer Builder update does not install

The Viewer Builder update (Viewer-Builder-1.7.0-RC.dmg) does not install. After downloading and removing Viewer Builder from the Applications folder, this update does not install.
Steps:
- Removed Viewer Builder app from Applications folder
- Download update from Adobe Site
- Click to install
- Opens package and performed some kind of install activity. There are no prompts and quickly finishes
- No Viewer Builder installed.
Any insights on to this would definitely help.
Adobe DPS on MacOS Lion

upgrade folio builder tools does not work..
this morning I tried to update the folio builder tools, from out of indesign cs5.5 on a windows PC..tried 5 times...still get the update message in the folio builder panel in Indesign.
this afternoon I tried the same on a completely different windows machine...same result...the thing does not work, no upgrade gets installed, I tried 20 times, even also the other tool....????????
2 days ago, I tried it on an other machine and it worked fine....
regards..Anne

Why Software Updater does not install some updates automatically?

QuestionWhy Software Updater does not install some updates automatically?
AnswerSoftware Updater only installs security-related updates automatically. Non-security-related updates, and service packs installation are required to be initiated manually via the Software updates tab under the Policy Manager Console.
In Policy Manager 12, a checkbox Show non-security-related updates has been introduced under the Policy Manager Console > Software tab. Unchecking the checkbox hides the following update types:
Microsoft security tools
Non-security updates
Service packs
Note: This checkbox is Policy Manager Console-specific setting. If you change the setting in one Policy Manager Console, it would not affect another Policy Manager Console connected to the same Policy Manager Server.

amrok90 wrote:
Updater does not detects 5800. I've reinstalled everything as it's stated (as, according to FAQ, sometimes the drivers may get corrupt). Restarted the PC. Nothing happened.
Presumably FOTA not an option for your 5800XM?
Happy to have helped forum with a Support Ratio = 42.5

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

Have the same issues here, 3GS 5.0.1. Did you find any solutions until today ?
I restored my phone, power up/down but nothing helps with my issues
greetings
/Edit:
Maybe I should read carefully your text so I can give you some more information.
my phone was updated via itunes.
some hours ago the phone charged up to 5% but than directly draining to zero...
can't help me with these issues...

Software updates sometimes do not install. I have two software updates that I continually show up as available to install. When I click on the install button it changes to installed. Checked About this Mac shows that the updates have not installed.

Software updates sometimes do not install. I have two software updates that I continually show up as available to install. When I click on the install button it changes to installed. Checked About this Mac shows that the updates have not installed.

What are the updates?

Update 4.01 asks to update, I say yes it appears to update then in the last step it goes back up to the update center and cannot connect, the update does not take effect and it keeps asking

I allow update 4.01 to update got thru all the steps and at the last step it goes back out to the update and cannot connect, the update does not take effect.

Sign out of your account on the iPad, restart the iPad and then sign back into your account.
Settinsg>Store>Apple ID - tap the ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
After restarting go to Settings>Store and sign in again.

HT4623 I download the software update but the update did not installed

I download the software update but the update did not installed

Did you do this download on the phone, or in iTunes? If on the phone, after the download did you select install? Same with iTunes, did you select update and install or just download? What did it do? Is anything showing on your phone?

HT4623 iOs6 update does not show up on iPad2.

I am trying to add an application and it requires the iOS6 update. The update is not showing up under my settings.
HELP!

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
Your iPad update to iOS 6.0.1, so you will lose the built-in YouTube app and the Maps app will change.

OS X 10.10.1 installer says the requirement for the update does not meet

Greetings.
I noticed the auto update setting of my MacBook Air had been not working for a month or so today.
So I tried to manually update OS X 10.10.1 (released Nov 17, 2014) and got this message from the installer: "OS X Update can't be installed on this disk. This volume does not meet the requirements for this update."
But the thing is, my mac already meet the requirement, as description of the update.
My mac is on OS X 10.10 and OS X Yosemite 10.10.1 Update states the system requirement as "OS X Yosemite 10.10"
How can I update my mac? What can be the source of this problem?
FYI, once I participated in Public Beta of Yosemite and clean-installed 10.10 from 10.9 with disk formatting.
Tried solution: rebooting, and repairing permission and repairing OS disk using Disk Utility.
Thank you in advance.

Barney-15E wrote:
In About this Mac, click on the Version number. It will change to a build number. Please post that. Although it sounds like you don't have a beta still installed, it may be still hanging around which would cause the problem you see.
The GM Build was 14A389.
Never knew the version number could be clicked, and now it says 10.10 (14A379b).
I googled the build number and it's Public Beta 4. Now it is clear that my mac still have old beta version AND the OS X showed a message to me when I tried to download a copy of Yosemite from the App Store:
Maybe the OS thinks itself as a full release of 10.10 for some reason. It explains why it did not auto download and install the system updates, regardless of the auto update System Preference of App Store.
Now I am going to download and re-install 10.10 rather than updating the OS.
Thank you very much Barney-15E for providing the clear answer and others for reading and giving advices.
Have a nice day!

HT4623 the update does not install

Similar Messages

Maybe you are looking for