HT4623 trying to reload the ios on my iPad...need help!
Help, trying to reload ios after doing a factory reset!...I now know I can upgrade the ios due to this being a 4.3.3 early system, but trying to restore the original operating system so we can use the ipad once again. HELP
Restore it through iTunes on your computer.
Similar Messages
-
There is always an error installing the ios, why? I need help, ty
Why is it that there is always an error in installing the ios update 6.0.1. I need help. Ty
What iOS are you currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I tried to update the iOS and never finished the installation
A day ago i tried to update the iOS of my iPad 2.
Everthing looked good but it never started again.
It's stuck in the tiny apply screen with the status bar under it.
Have any suggestion of what to do?
thank you in advance!!!Try this and see if it will restart the update. If it doe not work, you will need to restore your iPad using Recovery Mode.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
This explains how to restore with recovery mode.
If you can't update or restore your iOS device -
I have an iphone 4s. I tried to download the iOS 7 but it couldn't download because it said it was an error. I have plenty of space to download the upgrade. Do you know what it is?
Keep trying or maybe try again later. There are millions of people who are currently trying to do the same thing you're doing. Just be patient and you will be able to update, this happens on launch day. Just curious.....what was the error
-
When trying to install the ios 6.1.1 update, I get a message saying I can't install because I'm no longer connected to the internet. Every other app that requires internet connection work fine.
METHODS:
A :
Go to settings, then iTunes and apps, click on your Apple ID and then sign out. Sign back in and see if it works.
B :
Double-tap the Home button to bring about the multitasking screen
Navigate to “Settings” then swipe up on the Settings app to send it off the screen, thereby quitting
Go back to the home screen, relaunch Settings, and try to download the update again.
C :
Open Settings and go to “General” followed by “Reset”
Choose “Reset Network Settings” and tap the red text to confirm the reset – this will trash the network configuration and restart iOS
When booted back to the home screen, reconnect to a Wi-Fi network through settings
Install the iOS update as usual
Keep me posted -
Im trying to get the ios 4.1.2 on my iPod touch 2nd generation. Can I install it directly on my iPod . My iTunes on my computer isn't working!
you have to have itunes installed but check out http://support.apple.com/kb/ht4623.
-
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, BebaIf you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ? -
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
I have a 3gs, and I haven't updated it for a long time because I always have issues when I do. I tried to update the ios today, and it decided to update it to 6.1.3 instead of 7, I didn't think there would be a problem, so I clicked ok. When I came to check on my phone, itunes said there was an error with the update, and my phone was in recovery mode (plug-in sign on the screen). I looked up multiple things to try, I tried putting it in DFU mode, still itunes doesn't see it. The computer also doesn't list it under devices, however when it is plugged in the Apple Mobile Support USB Driver shows up in device manager. I have tried uninstalling itunes and reinstalling, still nothing. I just want to know if there is anything else I can try. Thanks.
No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.
-
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
eddiekero wrote:
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
At this point only a restore will fix your issue. -
I had to install a new hard drive and am trying to reload the songs off my ipod
trying to reload the songs off of my ipod to itunes now that i am back up and running. tells me i am synced to another itunes library (the wiped one) and basically wants me to wipe my ipod and start over. I don't have any songs in the itunes as of yet. is there a way to avoid a wipe and reload. that would take days to accomplish! please help!!!
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version installed with all the updates... Any ideas, thoughts?
ThanksI also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
i'am using iphone 5, i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends
Hello vinoth1986,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning update issues:
If you can't update or restore your iPhone, iPad, or iPod touch
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Hi , my name is Svilen and I tried to install the iOS 8.1.2 but it wants me to enter a pass code witch I don't know . I will be very thankful if you could help me . Many thanks , Svilen
it may be your apple id or your pass code you use to unlock the ipad.
Maybe you are looking for
-
Error while creating Billing doc using VF01 for Debit memo req. from RRB
Hi, I am creating billing doc for my Debit memo req. which is created using RRB(DP90, DP95). Error message - Item 000010 does not exist. When I debugged and looked into code it seems following lines are causing problem. Program LV60AA28 Line u2013 73
-
ReferenceError: Window does not have a constructor : 327?
I am trying to use the image processor in PS or Bridge and I get this error message: ReferenceError: Window does not have a constructor : 327 I am running Mac 10.7.5 and CS5. -Shane
-
How can I get the third battery out of the wireless keyboard to change it?
I got a message to change the batteries in my keyboard, but only two batteries will come out. Is there a way to get the third one out?
-
How to add a table to Favorites
Hello Friends I have this table that I keep using regularly. Everytime I want to use it, I have to give transaction code SE11 and then select the table I want etc. etc., Instead, is there a way to just put it on my favorite and once I click on it, it
-
File Transfer speed...Huge Topic
Hi guys, I've read lots of stu regarding file upload/download speed, but none of the tips I've read has fixed my problem. I have 2 LANs, interconnected with 52Mbps line, no router between , only switches /___sbsstatic___/migration-images/migration-im