HT4623 trying to update i pad and gone into general...but i have no settings button to press inbetween about and usage HELP
how do i upodate i pad to get i06 please
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom
Similar Messages
-
I have fist gen iPad. Still running iOS 5.1.1 When I attempt to update via usual mens I get response that it's up to date which is untrue. I've tried to update via the Pad itself and via iTunes with the same response on both. How do I get the updated iOS?
Just because you don't have the latest software means your ipad is unusable. Many times you can still download older versions of the apps. Check Texas Mac Man's answer from yesterday for some possible solutions,
Is there a version of Pages I can download for ios5.1.1? -
Tried to update my iphone 4 and got an error message. Now I can't update my phone or even restore it!!
Hi phaniemae528,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
Trying to update my iPhone 4 to the new IOS and it is saying that i cannot. it said to restore everything so i did and now it is saying that i cant activate im very frustrated and a little ****** help please
Your phone is in recovery mode. You need to restore it.
-
HT4623 tried to update my phone and now asking to connect to itunes
i have tried to update my phone to ios6 it is asking me to connect to itubes and now asks me to restore my phone to factory settings
Hi phaniemae528,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
HT4623 tried to update iphone 4 and it didnt work
i downloaded and started updating the phone and i got disconnected and now the phone wants me to connect it ti itunes but the computer says usb evice not recognized
Without more information like what happens when you restore the iPod all I can suggest is:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am trying to update my IPad 2 to the new iOS 6. . .but when I check ofr updates, I get an error message "Unable to check for update - An error occurred while chekcing for a sofware update" .
I have powered off and tried again . . .but it still cannot . My Wifi is fine - and the IPad is plugged in.
Are other people having these issues.
I tried to log onto Apple support and got an DNS error message. . .
Carrie MaeCould be the update servers are overloaded. Keep trying.
-
I'm trying to update my ipad2, however in general settings there is not prompt to let me do so. Is this iOS5 update not available for my iPad or is there another way to do this?
The Settings > General > Software Update option only appears when you have iOS 5+ installed - if you are on iOS 4 then you will need to do the next update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972 -
Why do I have to use a wi-fi connection to update my phone?
Because the upgrade download exceeds the maximum file size allowed under cellular. You either need to be on a wifi network, or connect your iPhone to your computer and upgrade throught iTunes.
-
Can anyone help me to delete photos that were put on my ipad from a lap top computer. I have tried following instructions from another member, but there was no arrow to press by the slideshow - so I was unable to go any further. Appreciate any help, as there are lots of photos.
I am pretty new to Ipad and computers - it's easy to delete photos taken on the Ipad camera - but what do I do on the computer to delete the laptop photos (which a family member put on) I can work my way around a computer OK.
-
My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I am trying to update my Iphone and it is stuck on the page that says RESCUE EMAIL. It won't let me hit next?!
Payment problem
1. Check if your form of payment is acceptable
http://support.apple.com/kb/HT5552
2. Check credit card number
3. Check security code
4. Billing Address must be the same as credit card
5. Check expiry date
6. Make sure you have sufficient fund -
I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?
This featue is only available on iphone running ios 5 or later.
Update as you always have, via itunes.
Read the article you linked. the entire article, not just the first part.
iOS: How to update your iPhone, iPad, or iPod touch -
HT4623 i tried to update my phone and it doesn't work.
i tried to update my phone and it doesn't work. Tried restoring from DFU, and other things. I got error message 3194 and have also gotten "this device isn't eligible for the requested build" What do i try now?
If it's stuck on the Apple logo, you'll have to force it into recovery mode and restore it. See http://support.apple.com/kb/ht1808.
-
I bought this iPhone from a guy and later on he passed away in Syria , after that , I tried to update the soft ware to ISO 7 but the system asked me for the old owner's information which I do not know so could you please advice me on that , what can I do to reactivate the device ?
You cannot reactivate the device without knowing the previous owner's information. This is the new antitheft measure built into the iPhone.
There's nothing you can do. You'll need to purchase a new phone.
Maybe you are looking for
-
This has been an ongoing problem. First some facts: Computer: MacPro tower, 2 x 2.8 GHz Quad-Core Intel Xeon Memory: 2 GB 800 MHz DDR2 FB-DIMM OS: 10.5.8 iTunes: 9.2.1 iPod: 5th gen, 60 gig, ver 1.3 Software Update says everything is up to date. Prev
-
Error -36 , can't repair disk,new installation, backups SD/or/CCC ?
Hi there, I use my imac solely for audio, NO internetconnection - only ever used for authorising software, 100% legit software etc. Anyways, I tried verifying my disk a couple of months ago...and I couldn't, it just failed and i got an arbitrary erro
-
Why new Spacer Item cretaed through personalization does not appear in SSHR
SR # 6987444.993 Customer : VIRGIN ATLANTIC LIMITED RELEASE : 11.5.10 CU 2 Patchset: FP K RUP 2 A Space Item created through Self Service Personalization Does Not Appear in Self Service HRMS Page. Responsibility : Employee Self-Service Click on "Pers
-
How to convert exponential data into number for the downloaded excelsheet
Hi I have downloaded one field data i.e. having char of 50, into excel sheet and it is displaying as exponential in the excel sheet. The data numbers should display as text only i.e 1236547896321 and not exponential Is anyone can tell how we can d
-
How can I drop the java objects from a schema
hi..good afternoon all... How can I drop the java objects from a database schema??? suppose the credentials are scott/tiger@db1 Another thing is that...I have to do this from cmd(command prompt) as there is no plsql developer or sqldeveloper installe