HT4623 Update has installed for ios 7 - why can't I install it??

Hi There
Can anyone help, Keep getting message that the software update is unavaliable?? HELP!!
Thank you

The "unavailable" may have nothing to do with the setup on your end. The servers are crazy busy right now (everyone and their brother seems to be updating right at release, not sure why), so it could just be that it's having problems establishing a connection. May want to try it again later tonight or tomorrow.
= L.I.

Similar Messages

  • HT4623 Hello! So I have a iPod 5th generation, and I just had a recent update, it was for iOS 6.1.3, and now for some reason, I can't get the iOS 7 update. Could anyone help me?

    Hello! So I have a iPod 5th generation, and I just had a recent update, it was for iOS 6.1.3, and now for some reason, I can't get the iOS 7 update. Could anyone help me?

    Apple's servers are slammed right now with iOS 7 downloads AND activation requests.
    Be patient and try again later.

  • Will the security update be available for IOS 6?

    Will the security update be available for IOS 6?

    linrey wrote:
    Not so - Apple says they have release iOS 6.1.6 to address the security problem. However no one seems to know how to get it since every request for an update only offers iOS 7. Very strange...
    Nothing strange about it.  iOS update only allows the installation of the latest release based on the hardware it detects you are using.  The 6.1.6 update is only available to those devices that CANNOT run iOS 7, like the iPhone 3Gs.  For any device capable of running iOS 7, the iOS update system will ONLY offer the option of updating to iOS 7.0.6, regardless of whether the device is still running iOS 6 at the time you try to update it.
    That is how the iOS update system has always worked - you simply cannot update to a lesser iOS release then the most recent for your particular hardware.

  • HT201210 I was trying to update my ipod for ios 6. It got downloaded but could not update my ipod. my ipod screen is now showing one message usb -up arrow-itunes, can anyone suggest something please.

    I was trying to update my ipod for ios 6. It got downloaded but could not update my ipod. my ipod screen is now showing one message usb -up arrow-itunes, can anyone suggest something please.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT202884 How can I update video codecs for iOS using code ?

    In reference to : OS X Mavericks: Some files may be converted when opened in QuickTime Player - Apple Support
    Is there a way to update video codecs for iOS, using code ?

    You could try finding somewhere with free WiFi like a coffee shop, shopping mall or fast-food places & downloading on their connection.

  • I cant update my 3gs for ios 5, can anyone help please

    I cant update my 3gs for ios 5, can anyone help me please ?

    If it is 3G, iOS 4.2.1 is end of line.
    If 3GS Connect and Update in iTunes to iOS 6.1.3

  • My credit card expired and now I can't update paid for apps. Why can't I upgrade without a credit card?

    My credit card expired and now I can't update paid for apps. Why can't I upgrade without a credit card?

    The "None" option is not available. Presumably because I have already purchased on that Apple ID with a credit card.
    That is not likely the case. As you can see in my account in the US  store I have a bank card in place and I have the None option.

  • I got an update message for iOS 7 but can't download as it keeps shutting down and the wheel goes so slow that you can hardly see it moving and says it will take 5-6 hours to download approx. 64 megabytes

    I got an update message for iOS 7 but can't download as it keeps shutting down and the wheel goes so slow that you can hardly see it moving and says it will take 5-6 hours to download approx. 64 megabytes

    Which way are you trying to update - iTunes or WiFi in the iPad settings? Try switching from one method to the other method. If you don't have a computer and need to use WiFi, try closing all apps and then reboot your iPad and try again.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of all of the apps in the recents tray. Tap the home button or anywhere above the task bar when you are done.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    It wouldn't hurt to reboot your router either by unplugging it from power for about 30 seconds, plug it back in, let it fully start up and then try to update again.

  • I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

    I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

    Checked out that link and everything seems to be in order on this machine at this time.
    I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
    Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
    This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
    I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
    Again, something that you guys may consider working on.
    Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

  • Please help! i have just upgraded to an iphone 5 for work, so i have started to backup my iphone 4 but it is stuck on 'finishing sync' and has been for 20hours!what can i do?i need it for work tomorrow

    please help! i have just upgraded to an iphone 5 for work, so i have started to backup my iphone 4 but it is stuck on 'finishing sync' and has been for 20hours!what can i do?i need it for work tomorrow

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • HT1688 Since updating to the new iOS 6 I can't facetime with anyone! Can anyone help me?

    Since updating to the new iOS 6 I can't facetime with anyone! Can anyone help me?

    i would look for Iphoto in your applications folder and put it in the trash, (be sure not to through away your Iphoto libary in your pictures folder)
    restart your computer
    and attempt to redownload it from the app store.

  • Since I've updated my IPad to IOS 6 I can't save pics from FB

    Since I've updated my IPad to IOS 6 I can't save pics from FB

    Hi!
    I am also having issues with the device since updating to IOs 6. The time between clicking an icon, i.e. a picture, and the load of that picture takes longer enough to notice it. It did not happen before the update.
    I am also having problems with some applications, specially the Facebook application. When I click on my picture in the right bar of the app, it promps a window that ask me for share my location, etc.. and get freeze there.
    Regarding reseting the device, already done. It did not helped.
    Also, SIRI is very nice, but sometimes it stop working and I have to re-start the device in order to being able to use SIRI again. When it happens, it looks like SIRI is sending the information, but does not do anything after.
    It is understandable that they require some time to get the new IOs version working properly, but I dont like to be a Beta tester.

  • HT1918 The cc on my acct doesn't have the $ to buy an app that I want but my account has $50.00 credit. Why can't I purchase the app with gift card?

    The cc on my acct doesn't have the $ to buy an app that I want but my account has $50.00 credit. Why can't I purchase the app with gift card?

    It says there is a problem with my payment information and prompts me to change payment info but I am only able to change it to another type of cc not gift card balance

  • Im trying to download apps from itunes but it cannot push through. It happened after i update my software to ios 6. Can someone please help me resolve this in my ipad? Thanks!

    Hi im trying to download apps in my ipad but it cannot push through and remained waiting. This happened after i updated my software to ios 6. Can someone please help me?

    You may not get a response as you are shouting at everyone.
    All caps indicates shouting, is considered rude, and is difficult to read.
    Many will not read such posts.
    Try turning off you caps lock and asking again.

  • HT204053 After updating my iPad to IOS 7, I can't access my AppStore. Please help.

    After updating my iPad to IOS 7, I can't access my AppStore. Please help. Is it anything to do with ICloud?

    What version of OS X are you using and what version of iTunes? Are you getting any error messages?
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    ITunes: Syncing media content to your iOS devices
    http://support.apple.com/kb/ht1351
     Cheers, Tom

Maybe you are looking for

  • Daily edition (prs 900) touchscreen problem

    Does anyone know what to do about this problem? The touchscreen on my prs 900 daily edition has stopped working. It just doesn't respond. You touch or tap or swipe and nothing happens - no response. I cant use any screen icons that depend on the touc

  • Where should i specify about my target system in XI

    Hi all! Xi sends XML file to my J2EE application.I am using HTTP adapter as receiver. I have given the following info in outbound HTTP communication channel:what else to be specified in ID Adapter type: HTTP Message protocol: Xi payload in HTTP body

  • Can PCM multi-channel wav (not DD or DTS) be sent over SPDIF

    <Can PCM multi-channel wav (not DD or DTS) be sent over SPDIF? --- X-Fi Elite Pro SB055A and Audio Creation Mode --- If I understand correctly, SPDIF format can support uncompressed MULTICHANNEL wav format (within the limitations of its bandwidth) as

  • Changed pixel size when exporting - won't go back default

    I was exporting several photos one at a time and changes one the the dimensions. Now LR5 is applying that same pixel dimension to all exports. Does anyone know how to get LR to go back to defaulting (I guess) to each photos specific dimensions?

  • Difference: Full load, Delta Load & INIT load in BW

    Hi Experts, I am new to SAP BW Data warehousing. What is the difference between Full load, Delta Load & INIT load in BW. Regards Praveen